First of all, we do not know what you did and as I don't know what you did, which procedure you followed, which SW/FW/kernel you used - you first...
Of course, you could do as I suggested and get a FW with the SW to go between various OSs...
Good luck!
P.S. I think you may have skipped a step or two, explained in a FW...
P.S. I think you may have skipped a step or two, explained in a FW...[/QUOTE]
Hi Gorski............sorry for my bad English, I think I have not explained well..........
the problem I have, azbox hd elite always in rescue mode ........
Step 1: starting Putty and the serial connection.....PROCESS OK
Step 2: connection to Yamon..........PROCESS OK
Etape 3: Disabling of « Hardware acceleration »......PROCESS OK
Step 4: Enabling Azbox network Interface.........PROCESS OK
Step 5: Loading and starting Rescue Linux..........PROCESS OK
Etape 6: Connecting to the Rescue Linux.........PROCESS OK
Step 7. Transferring the recovery files..........PROCESS OK
Step 8. Starting recovery.........PROCESS OK
Wait for the end of this process, the Azbox will restart automatically. ........PROCESS OK
I´M safe! my Azbox is back with his original bootloader and i can upgrade my Azbox to the
official firmware by following the normal process (patch.bin on the root of an USB pen)...........
FIRST PROBLEM...........in the
Upgrade screen select: 4. Format Application Area........Can not do this step........
I´m go to the 1-UPGRADE USB......PROCESS OK
THE AZBOX START WITH OFFICIAL FIRMWARE...........slow scrolling menu settings.....
"INSTALLING E2"
USB WHITH OFFICIAL TO E2, RESTART.....
AND STEP 4. FORMAT APLICATION AREA ..........PROCESS NOT OK
STEP 1. UPGRADE USB..........PROCESS OK
RESTART IN RESCUE MODE............PROCESS OK
IP.....OK IN DISPLAY
AZUPD 2.2.7 CONECT OK
INSTALL E2...........PROCESS OK
RESTART.............WHITOUT USB.........RESCUE MODE "IP IN DISPLAY" ALWAYSSSSSSSSS.............ALWAYS...ALWAYS....ALWAYS.....:mecry::mecry::mecry:
YOU UNDERSTAND ME NOW?
THANK YOU