Viark Forever boxes

Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,533
darkm said:
Just to confirm the update procedure for roll back as I believe the issues with my box started with hdmi cec update with viark. I'm thinking if I can roll back to 1.14 it might stop.

Roll back.

Install factory software first
Then flash 1.14

Would you lose sp1 doing this?

Sent from my M2101K6G using Tapatalk
Click to expand...
No you would not.

Rolling back or installing firmware does not change the serial number of the box that is used to login to forever.

1.14 100% was capable of SP1 so it will work as it does now. You will get the nag screen a box update is available.
 
D

darkm

Registered
Messages
75
Ferret said:
No you would not.

Rolling back or installing firmware does not change the serial number of the box that is used to login to forever.

1.14 100% was capable of SP1 so it will work as it does now. You will get the nag screen a box update is available.
Click to expand...
Thank you. The box just has a problemwith hdmi cec implementation. Causing soundbar to disconnect from TV. The Nvidia shield will only go through the TV speakers.

Disconnect the hdmi cable from the viark and the TV is then able to route the sound to soundbar. Not to mention box has randomly went into standby mode and won't come out until reboot.

I should just for the sake of doing it, switch the hdmi cable before reverting to older firmware.



Sent from my M2101K6G using Tapatalk
 
kegnkiwi

kegnkiwi

Super VIP
Donating Member
Messages
898
darkm said:
Thank you. The box just has a problemwith hdmi cec implementation. Causing soundbar to disconnect from TV. The Nvidia shield will only go through the TV speakers.

Disconnect the hdmi cable from the viark and the TV is then able to route the sound to soundbar. Not to mention box has randomly went into standby mode and won't come out until reboot.

I should just for the sake of doing it, switch the hdmi cable before reverting to older firmware.



Sent from my M2101K6G using Tapatalk
Click to expand...
There are some settings with regards to hdmi-cec settings in the viark menu system. Maybe have a look in there as well.
 
D

darkm

Registered
Messages
75
kegnkiwi said:
There are some settings with regards to hdmi-cec settings in the viark menu system. Maybe have a look in there as well.
Click to expand...
I did that, will have another go before flashing. My main issue was the box going into sleep mode after a few minutes. Been ok the last few times I've watched a match but now I can see tv not routing audio to the soundbar when I switch hdmi input.

I know it's the viark doing. I dont think the handshake of disconnect that it does with the TV works correctly.

But will play about with the settings to make sure it's off and change the cable etc...

Sent from my M2101K6G using Tapatalk
 
P

pianos5

Registered
Messages
206
good morning everyone. out of curiosity, at 16e, why doesn't the xxx extasy 4k channel work?(viark 4k, with forever)
 
kegnkiwi

kegnkiwi

Super VIP
Donating Member
Messages
898
pianos5 said:
good morning everyone. out of curiosity, at 16e, why doesn't the xxx extasy 4k channel work?(viark 4k, with forever)
Click to expand...
Is it part of the digital albania package? I might just be that whoever owns the card simply did not want porn on that package on the card.
 
manic01

manic01

Super VIP
Messages
2,548
mouadhada said:
Any answer for my question please : Is there any forver box implementing sat>ip tuner ?
Click to expand...
Only other option other than viark sat I can see is this , android and E2 stb

Qviart Dual 4k Uhd Linux Enigma2+Android 9.0 Combo Review & Setup Guide

Qviart Dual 4k Uhd Linux Enigma2+Android 9.0 Combo Review & Setup Guide With a spec DVB-S2X+T2/C H.265 IPTV 2GB RAM 16GB the Dual is fairly well specced to feature Android and Enigma 2 on the same receiver. The Android side of this box is capable of using Forever SP codes. The Dual in my...
sat-universe.com sat-universe.com
 
You must log in or register to reply here.
Top