Viark Forever Boxes Setup No Server Chat

kegnkiwi

kegnkiwi

Staff member
Moderator
Messages
1,481
ABARKIE said:
Can anyone recommend where I can get a new aerial for the wifi for the receiver please?

Keeps dropping signal and want to replace the aerial or use the USB socket as a replacement, so any assistance to resolve would be appreciated
Click to expand...
You could also try a WiFi bridge, they plug into the ethernet port and power up by USB. I think vonnets make some.
 
S

Squiffy

Registered
Messages
63
ABARKIE said:
Can anyone recommend where I can get a new aerial for the wifi for the receiver please?

Keeps dropping signal and want to replace the aerial or use the USB socket as a replacement, so any assistance to resolve would be appreciated
Click to expand...
You may want to rule out co-channel interference before buying a new aerial. Try changing the channel in your router, to 1, 6 or 11, which are usually recommended in such circumstances.
 
S

sirius123

Registered
Messages
49
I want to ask a question that may have been asked, but I couldn't find it. The question is this, my subscription expires in about four months and if I decide to renew it now for some reason for the next 2-3 years, when will it count, from the current date or from the end of the current one?
 
manic01

manic01

Super VIP
Messages
3,246
sirius123 said:
I want to ask a question that may have been asked, but I couldn't find it. The question is this, my subscription expires in about four months and if I decide to renew it now for some reason for the next 2-3 years, when will it count, from the current date or from the end of the current one?
Click to expand...
It will add whats currently left on top of new sub, We cant really discuss much more as its viark topic not server👍
 
kegnkiwi

kegnkiwi

Staff member
Moderator
Messages
1,481
sirius123 said:
I want to ask a question that may have been asked, but I couldn't find it. The question is this, my subscription expires in about four months and if I decide to renew it now for some reason for the next 2-3 years, when will it count, from the current date or from the end of the current one?
Click to expand...
Yes it adds it onto the end of your current subscription.
 
G

ginoworm

Registered
Messages
155
barney115 said:
All is okay at this time and stabilized likely be many issues when EPL Football And AJ vs Dubious Boxing Box Office PPV Starts again on Saturday no doubt at all m8 !!
Click to expand...

Ok so be interesting to see how the next week pans out, had a good run but can’t help but feel a bit gutted if we do lose 28.2 :(
 
Y

Youknowme02

Senior Member
Messages
268
Hello has anyone able to get DiSEqc1.2 on Viark 4k firmware 1.21 to work each time I move the dish and click "Store Position" it say Position 1-63 full??? I haven't stored no positions and I don't see anyway to erase or over write??/
 
117

117

Premium Donator
Messages
97
Youknowme02 said:
Hello has anyone able to get DiSEqc1.2 on Viark 4k firmware 1.21 to work each time I move the dish and click "Store Position" it say Position 1-63 full??? I haven't stored no positions and I don't see anyway to erase or over write??/
Click to expand...
¿Does removing unwanted satellites from the initial 'Menu / Installation/ Antenna Configuration' screen config help? Good luck. (y)
 
K

kippysat

Donating Member
Messages
415
manic01 said:
Sorry my friend maybe I misread your post 👍
Click to expand...
@manic01,

It's half and half mate. In one sentence I listed 13E as foreign language comms and then you correctly
spotted that lower down I include 13E in another sentence.

"Other Language Comms = 52E, 39E, 23.5E, 13E, 2E, 1W, 30W"

"Others can help me here, but as far as I know only 28.2E, 19.2E, 16E, 13E have EPL matches with English comms."

It's my mistake.
 
H

Houls

Registered
Messages
7
Hi everyone,

apologies if this has been asked or answered before, but couldn't find anything related.

After flashing 2 Viark Sat HD receivers with the latest firmware to server 146 I noticed the image quality on full hd channels seems to have dropped quite a bit. It seems they are being shown in lower resolution and then being badly upscaled by the receiver. The deinterlacing done by the receiver also seems flaky, when I put the receiver resolution on 1080p50 the fine lines on logos and on screen graphics are shaking.

I already factory reseted and re-flashed the devices several times and nothing seems to sort the issue. I'm equating going one version back and see if that does the trick.

Has anyone had any similar symptons?

Thanks in advance
 
Last edited:
manic01

manic01

Super VIP
Messages
3,246
Houls said:
Hi everyone,

apologies if this has been asked or answered before, but couldn't find anything related.

After flashing 2 Viark Sat HD receivers with the latest firmware to server 146 I noticed the image quality on full hd channels seems to have dropped quite a bit. It seems they are being shown in lower resolution and then being badly upscaled by the receiver. The deinterlacing done by the receiver also seems flaky, when I put the receiver resolution on 1080p50 the fine lines on logos and on screen graphics are shaking.

I already factory reseted and re-flashed the devices several times and nothing seems to sort the issue. I'm equating going one version back and see if that does the trick.

Has anyone had any similar symptons?

Thanks in advance
Click to expand...
Nope, all works fine for me, and if you go back versions you risk losing providers
 
You must log in or register to reply here.
Top