dm 800hd and gamma in the internal slot?

[fantom007gr]

can somebody please share the khowlenge how to see in dm800hd with a gamma card in the slot of the receiver?
thanks

 

[Silot]

w

Try with this Cfg



SERVER LISTEN PORT : 12000
INFO LISTEN PORT : 16000
HTML INFO LISTEN PORT : 16001
CAMKEY: /dev/sci0 00 00 00 00 00 00 00 00
CAMDATA: /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ZAP OSD TIME :0
#BOXKEY:/dev/sci0 00 00 00 00
OSD USERNAME :root
OSD PASSWORD :dreambox
SHOW TIMING : no
DEBUG : yes
NEWCAMD CONF :no
DISABLE EMM : no
EXTRA EMM LEVEL : YES
#
CAMKEY: /dev/sci0 00 00 00 00 00 00 00 00
CAMKEY: /dev/sci1 00 00 00 00 00 00 00 00
#
CAMKEY : /dev/sci0 00 00 00 00 00 00 00 00
CAMDATA : /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TRY ALL CHIDS : /dev/sci0
#
SMARTCARD CLOCK FREQUENCY : /dev/sci0 6000000
SMARTCARD CLOCK FREQUENCY: /dev/sci0 6000000
CAMKEY : /dev/sci0 00 00 00 00 00 00 00 00
CAMDATA : /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TRY ALL CHIDS: /dev/sci0
B : /dev/sci/0 06
#
CAMKEY : /dev/sci0 00 00 00 00 00 00 00 00
CAMDATA : /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TRY ALL CHIDS : /dev/sci0
SMARTCARD CLOCK FREQUENCY : /dev/sci0 6000000

 

[Brummie]

yes it will work with CCcam 2.1.3 a bit slow the ecm but works fine
this is my config for my 800
CAMKEY : /dev/sci0 00 00 00 00 00 00 00 00
CAMDATA : /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TRY ALL CHIDS : /dev/sci0
SMARTCARD CLOCK FREQUENCY : /dev/sci0 6000000

 

[fantom007gr]

gamma

thanks very mutch for your replay
this confing i will add in my cccam config?

 

[ledra]

Hi,
If you are referring to DM800 genuine, and Ccccam 2.1.3, from the config file you should untick
SEARIAL READER : /dev/tts/0
CAMDATA ; /dev/sci0/ 11 22 33 44 55 66 77 88 99 aa bb cc dd ee ff
Those lines already exist in the conf file. You just remove the # at the beginning.
Best regards.
Ledra

 

[Ferret]

Just copy and paste the above config by Brummie in to your Cfg any where will do. The info by silot includes the same info but also info you dont need.

Ferret

 

[soulmate]

the posted config works fine here with dm800 and gemini 4.6

 

[waterman]

Can anyone tell me please How I can see if my DM800 can recognize the gamma card;
I can't find where in menu shows information about the inserted card.
The only point I found is in common interface that was empty.
P.S. I have already made changes in cccam config as you said and put gamma card in internal slot with the chip facing downwards

 

[bellof]

try it on cccam-info-page!
ip of box:16001 on your web-browser(pc)
there you have look under entitlements

 

[Brummie]

change from common interface to CCcam.

then in you url type dreambox ip like this h**p://192.168.0.?.:16001/entitlements

 

[waterman]

I changed from common interface to CCcam but my gamma does not seem to work.
I still can't see entitlements even I type in my url http://192.168.2.5.:16001/entitlements.
Any other idea?

 

[Brummie]

what image and version of cccam are you using

 

[Ferret]

Have you edited the cccam.cfg file located at /etc with the info for this post by Brummie?

http://www.sat-universe.com/showpost.php?p=530163&postcount=3

Ferret

 

[waterman]

I have Gemini Release 4.6.0 2009-12-24 and CCcam 2.1.3.
Yes I did edit the cccam.cfg with the lines that Brummie posted but with negative results

 

[Brummie]

try cccam 2.1.2

 

[tsitsi58]

i use nabilo blackhole 0.12 in my dm800 but i can't activate my gammacard from the internal reader is there any special settings in cccam config for this image?thanks

 

[Ferret]

i use nabilo blackhole 0.12 in my dm800 but i can't activate my gammacard from the internal reader is there any special settings in cccam config for this image?thanks

Just this mate

http://www.sat-universe.com/showpost.php?p=530163&postcount=3

Ferret

 

[tsitsi58]

do i have to restart the dm?

 

[bellof]

after editing cfg try restart cccam!
with brummies cfg works 100% in cccam 2.1.3!

have also nabilo BH 0.12 as image on dm800 running!

look:
card reader /dev/sci0
handled 4633(4633) ecms and 1(1) emms
Irdeto card
Caid 622 ACS 1285 MCR
Cardserial REMOVED (9f13cd)
Provider 00 013033

 

[tsitsi58]

unfortunatelly is not working in my dm