Viark Forever boxes

[archiesat]

clearing all keys never made no difference with last firmware 2.20 (oct 31 2023) display biss found ok but incorrect key was showed.even when correct key was inserted by me it still was looking for biss key message appeared on screen.no such problems with viark drs2

 

[archiesat]

i used the viark sat for finding biss in the past was great but couldnt relay on it with last firmware so hope new firmware released will be back to its old self.i have new viark sat also not yet activated

 

[manic01]

i used the viark sat for finding biss in the past was great but couldnt relay on it with last firmware so hope new firmware released will be back to its old self.i have new viark sat also not yet activated

I have had no issues on biss auto update on my viark sat, which is strange if you have had issues.

 

[archiesat]

I have had no issues on biss auto update on my viark sat, which is strange if you have had issues.

Cheers Manic01 i will factory reset and load latest firmware back on with my channel list and see if it finds feed on 23.5E atm

 

[Coastman]

1.9e clears as does albertis
Forever channels are yellow for me.

Have checked again and obviously yes they are yellow. When i posted for some reason must have been thinking about the much maligned TMM4 as a i think they had them as green when they were available for
a very short while.

As others have pointed out brilliant to have pv in menu and especially biss au did a test with Ou on 13e and for me took a little while but did clear. Its easy to criticise stuff that have not been added which
like others i can be guilty of so i think a bit off praise is due when things do become available. As ive said only just set the receiver up so im really pleased with whats available on it now.

You told me yesterday before i put the file on to disable Ch Max first, just out of interest what was the reason for that also what does Ch Max menu do and should i change any settings in it from the factory
ones? Thanks.

 

[manic01]

Have checked again and obviously yes they are yellow. When i posted for some reason must have been thinking about the much maligned TMM4 as a i think they had them as green when they were available for
a very short while.

As others have pointed out brilliant to have pv in menu and especially biss au did a test with Ou on 13e and for me took a little while but did clear. Its easy to criticise stuff that have not been added which
like others i can be guilty of so i think a bit off praise is due when things do become available. As ive said only just set the receiver up so im really pleased with whats available on it now.

You told me yesterday before i put the file on to disable Ch Max first, just out of interest what was the reason for that also what does Ch Max menu do and should i change any settings in it from the factory
ones? Thanks.

Read here
CHMax

 

[connor91]

clearing all keys never made no difference with last firmware 2.20 (oct 31 2023) display biss found ok but incorrect key was showed.even when correct key was inserted by me it still was looking for biss key message appeared on screen.no such problems with viark drs2

i also had this issue and what i found to fix it was just delete all the existing keys and boom it worked

 

[dog-man]

I wish they had fixed the EPG issue in this new firmware.
Fed up with just having now and next.

 

[archiesat]

My viark sat biss au problem still persists after down grade to old firmware factory resetting before and after firmwares installing latest firmware. biss update ok message appears with wrong key.after 5-10 minutes it clears with correct key.then i loaded my saved channel list into box went to channel which had cleared and again its back to encrypted with wrong key.

My only hope is to get a viark sat hd (not 4k) original firmware zip file for usb.

 

[manic01]

I wish they had fixed the EPG issue in this new firmware.
Fed up with just having now and next.

I have some with now/next some with full epg

 

[manic01]

My viark sat biss au problem still persists after down grade to old firmware factory resetting before and after firmwares installing latest firmware. biss update ok message appears with wrong key.after 5-10 minutes it clears with correct key.then i loaded my saved channel list into box went to channel which had cleared and again its back to encrypted with wrong key.

My only hope is to get a viark sat hd (not 4k) original firmware zip file for usb.

Official fw

 

[archiesat]

Official fw

Thanks mate was looking everywhere for firmware

 

[archiesat]

@manic01 clean install with viark sat 6.00 bin with a factory reset loaded latest viark sat 2.20 file cleared all biss keys. All looks to be updating on 7E ok.So i'm going to start from scratch with new motorised channel list to keep things tidy lol. i think firmwares going in out of receiver messed up biss files.

Thanks again

 

[Ferret]

@manic01 clean install with viark sat 6.00 bin with a factory reset loaded latest viark sat 2.20 file cleared all biss keys. All looks to be updating on 7E ok.So i'm going to start from scratch with new motorised channel list to keep things tidy lol. i think firmwares going in out of receiver messed up biss files.

Thanks again

If you factory reset after updates before setting it up you should not get these types of issues.

 

[archiesat]

The biss update ok message appearing with wrong key started a few firmware versions ago and the having to delete all biss keys in viark sat i think is a make shift solution but works.i hope they have new firmware sorted for biss au that worked great before we had to delete all biss keys every time which is not great going from 1 feed to another for me lol