Vantage HD Original Firmware

marce

VIP
Messages
7,115
Neue Vantage HD-Firmware 02.58T-O


Code:
04/03/2010 Version 02.58T-O
Improvements:
- Channel list update (ARD and ZDF HD now included in standard program list).
- Unicable switch with 1 satellite and 8 outputs added by Kathrein
- Fixed problem when switching on encrypted channels. Message "an encrypted channel" no longer comes.
 

juli13

Staff member
Administrator
Messages
10,194
19.03.2010

Code:
Main Firmware 01.02T-O BETA 

for VT-1 ( Full HD )
 
Last edited by a moderator:

juli13

Staff member
Administrator
Messages
10,194
01/04/2010 Version 01.02T-O BETA2

for VT-1 ( Full HD )
Code:
[B]Improvements:[/B]
- Fixed crashes caused by EPG Save
- Astra TP 11,023 switched to DVB-S2
- Child Safety Pin of locked channels is probed
- Improved FTP connection
Important
 

tani1

Staff member
Super Moderator
Messages
17,767
10/04/2010 Main Firmware 01.02T-O BETA3

for VT-1 ( Full HD )
Improvements:
- Bugfix inclusion
o No fixed audio / video problem starting a timer in the background.
- Channel List Update
 

bozomustafa_68

Registered
Messages
16,935
Main Firmware 01.03T-O

Main Firmware 01.03T-O

23.04.2010 Version 01.03T-O
Verbesserungen:
- Live Bild im OLED auf HD Sendern
o Beim Schalten auf den HD Sender wird dann automatisch das Senderlogo und der Name eingeblendet, beim zurückschalten auf einen SD Sender wird wieder das Live Bild angezeigt.
- Timer Aufnahme startet nun auch wenn man einen Film von der Festplatte wiedergibt.
- PIP mit Bildübergang auf „An“ ist nun möglich
- Nach entschlüsseln einer verschlüsselten Aufnahme wird nun die Zeit bei der Wiedergabe im VANTAGE Player richtig angezeigt.
o Die Zeit in der Medialiste wird noch nicht korrekt angezeigt ( Chipsatztreiber Problem muss von ST behoben werden ).
- Schneide Funktion verbessert.
o Es muss nur noch Start und Endposition gesetzt werden. Durch Drücken der Option-Taste wird der Film geschnitten.
- Bug beim Umschalten der Kanäle behoben wenn die Auflösung auf „ Auto“ gestellt ist.
- Bestätigungsfenster zum Herunterfahren der Box nach einem Timer wurde auf 1 Minute verlängert.
Wichtig
 

marce

VIP
Messages
7,115
VT-1 Full HD

Code:
06/23/2010 version 01.05T beta1-O
Improvements:
- Improve the EPG Save
Or should now pass without hang (black screen) will
- Added startup mode selection
or not yet operational. The choice of Linux will start with OS21.
Sincerely,
Your VANTAGE - Supports
 

marce

VIP
Messages
7,115
VT-1 Full HD


Code:
Version 01.05T-O Beta 2  29.06.2010
Release note
German
IMPORTANT please read:
Consult the "History note read," for already implemented functions. If problems occur after the update, do a factory reset with the menu item "Install / Basic settings / factory settings by".
Please save your settings before the factory reset -> Menu / Software Manager / System backup
To perform a software update:
1st Unzip the file on a USB disk.
2nd Now, connect the USB device with the receiver,
3rd On the receiver you choose from the menu / multimedia / media / USB, the update file *. dlp "from USB disk
4th Confirm the question with "Yes"
5th The update is complete when the receiver restarts.

[B]Improvements:
- Crash on the channel Tele5 (Hotbird) fixed.
- Hard drive detection improves
- Corrected time display in Media Player.
o After cutting the right time to appear.
Yours sincerely[/B]
Your VANTAGE - Support
 

marce

VIP
Messages
7,115
VT-1 ( Full HD )





Code:
Version 01.06T-O Beta 1

Release note
German
IMPORTANT please read:
Consult the "History note read," for already implemented functions. If problems occur after the update, do a factory reset with the menu item "Install / Basic settings / factory settings by".
Please save your settings before the factory reset -> Menu / Software Manager / System backup
To perform a software update:
1st Unzip the file on a USB disk.
2nd Now connect the USB device with the receiver,
3rd On the receiver you choose from the menu / multimedia / media / USB, the update file *. dlp "from USB disk
4th Confirm the question with "Yes"
5th The update is complete when the receiver restarts.


08/07/2010 

Improvements:
- System Backup now saves the settings for Tuner2
- Fixed problems when copying files over 5GB
- Hard drive detection has been improved
- Channel logos are now displayed for the favorites.
o The logos are from the main channel list is automatically selected.
- Fixed Teletext on ZDF
- When starting the recording, the red line is displayed immediately. It has no buttons are pressed.
- When loading AVI's now a message is displayed.
- Timer recording start now if you look at a movie from the disk.
Yours sincerely,
Your VANTAGE - Support
 

kiliantv

Super VIP
Messages
7,057
Version 02.61T-O

09.07.2010 Version 2.61
Verbesserungen:
- Aufnahme Bugfix
o Fehler wie Bild- und Tonaussetzer sind behoben. Dies gillt nur für Aufnahmen die mit der neuen Software gemacht werden. Die Änderung hat keinen Einfluss auf die bereits gemachten Aufnahmen
- Kanallisten Update
o ARD und ZDF HD auf den ersten beiden Plätzen
 

tani1

Staff member
Super Moderator
Messages
17,767
Neue Software for VANTAGE VT-1

Version 01.06T-O Beta 2

Improvements:
- Unicable recording
- Timer is now entering the programmed channel.
- Improvement in the detection of the IF frequencies
 

tani1

Staff member
Super Moderator
Messages
17,767
New Software for VANTAGE VT-1

Version 01.06T-O BETA4
Improvements:
- Unicable background recording
o The receiver will start the timer in the background now and no longer switches to
- Added fast boats.
o enable this option through the boot process is accelerated (Note: The standby power consumption increases by!)
- Umlauts are now displayed in the player and the timer recording properly.
- Added option to turn off the system messages
- Quality of thumbnails in JPG's improved
- SD output option in the Video menu settings
o To: Scart connection has always picture.
o car: when a HDMI cable is plugged in, turned off, the Scart connector. This makes the box faster to use. Affects mainly for Linux.
- Timer standby circuit added.
o If the box is already in use when starting a timer to stop this even after the timer (even if the option to Standby "is placed). If the speaker is started by the timer turns them off, as in the standby field selected. This option will not be activated.
 

tani1

Staff member
Super Moderator
Messages
17,767
New Software for VANTAGE VT-1

Version 01.07T-O
Improvements:
- Unicable background recording
o The receiver will start the timer in the background now and no longer switches to
- Added fast boats.
o enable this option through the boot process is accelerated (Note: The power consumption in standby rises
in fact! )
- Umlauts are now displayed in the player and the timer recording properly.
- Added option to turn off the system messages
- Quality of thumbnails in JPG's improved
- SD output option in the Video menu settings
o To: Scart connection has always picture.
o car: when a HDMI cable is plugged in, turned off, the Scart connector. This makes the box more quickly in
operation. Does especially in Linux.
- Timer standby circuit added.
o If the box is already in use when starting a timer to stop this even after the timer (even if the
Standby option to "on" stands). If the speaker is started by the timer turns the elected as the standby box
from. This option will not be activated.
- Last Unicable control
o Following up the software deletes the current Unicable settings. In the menu, there are now only
Unicable the option "Off" or "on" by pressing the OK button. In the new window now, the IF frequency
eingegben be and the corresponding number from 0-7. If no number is correct is no reception
possible. After entering the frequency and the number, the signal is examined, the signal is on the cable is
the setting is stored.
- Added German channel list
o The new Sky HD channels were added to the list.
- Fix special characters
o There are again all the letters in the EPG display.
 

kargo.25

Super VIP
Messages
9,725
Vantage HD Hersteller Mainware 2.66T-O

15.10.2010 Version 2.66
Verbesserungen:
- Unicable Signalerkennung nach dem Standby verbessert
- DiSEqC Protokoll Fehler behoben
 
Last edited:

bozomustafa_68

Registered
Messages
16,935
Vantage HD Original Firmware

Neue Software für die VANTAGE HD Serie
Version 2.68 mit LegacyCam Support


Code:
*explanation in the file
 

bozomustafa_68

Registered
Messages
16,935
Vantage HD Original Firmware

Neue Software für die VANTAGE HD Serie

Version 2.69 101110


Code:
*explanation in the file
 

bozomustafa_68

Registered
Messages
16,935
Vantage HD Original Firmware

Neue Beta-Software für die VANTAGE HD Serie

Version 2.70Beta ( Testsoftware für die Bidlaussetzer über HDMI )




Code:
*explanation in the file
 
Top