receiver and it dont show nothing Patch 138p for TM 5000 USB Super Series

[FENEKI]

please can someone check because this file not working 12.07.2010l put it in my tm5200Super the usb stick in receiver and it dont show nothing Patch 138p for TM 5000 USB Super Series

 

[Benkurd]

you sent the patch to usb the put usb to your tm
then follow the screen you can see nothink?
or you load the patch And its not opning anthink?
witch one mate

 

[FENEKI]

the usb stick when i put it in the pc the latest softwear will be there,but when i put it in the tm it will not show nothing, thank you for your help mate

 

[Benkurd]

ok got you now formet your usb fat 32
delete the patch on your pc
then download fresh one laod it again
if still same your best option is to use loader 1.87

 

[FENEKI]

loader 1.87 ok m8

 

[Benkurd]

here also hwo to update with rs 232 cabel and loader187 Turn TM off Double click the loader Make sure download is selected, and click on Browse and select your patch, and click Open
Using remote control now switch Technomate receiver on and then click Auto Detect
Box now reads Found stb at com 1 ,2,3 or10

Press Connect and click Start

Patch will now be downloaded to your receiver it will take longer the usb but it will work great

 

[FENEKI]

the usb stick when i put it in the tm5200Super will be there loader 1.87.

put it in my tm5200Super the usb stick in receiver not show. nothing Patch 138p

thank you for your help mate

 

[Benkurd]

loader 187 work with null moder cabel here is the loader
http://www.sat-universe.com/showthread.php?t=68957
then see my post abave
oh did you format your usb?

 

[Hadziano]

the new patch doesnt work...copied from pc to usb...nothing showing when inserting USB into receiver...

whats the format for that patch?here it just says "file",something aint right..

how do you change it to STB file?

 

[Hadziano]

If anybody else had the problem with this new phantom patch,here is the solution:

right click on the patch,click properties,and on the file name just add ".stb" at the end..should change to stb file..
hope this helps.thanks