- Messages
- 17,533
Im watching sats from 53e-30 west with no issues.
It seems VBOX owners are having issues, are you a vbox user ?
Qviart DUAL Experimental Receiver
- Thread starter raul7
- Start date
It seems VBOX owners are having issues, are you a vbox user ?
i will check i dont know can you please show a photo of vbox .
- Messages
- 17,533
Does your cable out of the dual go directly to your motor on your dish ?
Or to something like this ?
No my cable goes directly to the motor nothing like this .
- Messages
- 17,533
So then what you your tried ?
Easy way to do this is install my channel list
Qviart DUAL Experimental Receiver
Im posting a new channel settings list later today. Blind scan done on all the major sat, just finishing it now. Try this when i post it. Super ,thankyou...
www.sat-universe.com
To do this unrar the list then place that file in the root of a usb stick then place it in the front of your dual.
To install the list follow these pictures
Like this
Press enter list will load.
Then go to channel search scroll down to usuals and enter your coordinates. Remember a - figure in you coordinates is a West setting.
Then reboot all been well your motor will move as it should. Does your motor work fine with e2 images on the dual ?
Last edited:
I cant previw the photos you have sent can you send them again pleaseSo then what you your tried ?
Easy way to do this is install my channel list
Qviart DUAL Experimental Receiver
Im posting a new channel settings list later today. Blind scan done on all the major sat, just finishing it now. Try this when i post it. Super ,thankyou...
To do this unrar the list then place that file in the root of a usb stick then place it in the front of your dual.
To install the list follow these pictures
Like this
Press enter list will load.
Then go to channel search scroll down to usuals and enter your coordinates. Remember a - figure in you coordinates is a West setting.
Then reboot all been well your motor will move as it should. Does your motor work fine with e2 images on the dual ?
- Messages
- 17,533
- Messages
- 17,533
Well pleased your up and running
- Messages
- 896
Great to hear you are sorted
cokeaddict
Member
- Messages
- 373
Just a headsup for anyone interested.
OpenBh have just released an official image for the Qviart Dual (enigma2)
OpenBh have just released an official image for the Qviart Dual (enigma2)
- Messages
- 896
That's good to know i got hold of the unofficial version a few weeks back. Seemed a decent image at that point.
- Messages
- 896
Installed Openbh 5.3 this evening on the dual, the image installed quickly and the remote worked fine. The screen sizing menu works a little oddly. You can adjust the settings but the live image does not seem to alter until you alter the settings at the bottom which is screen height i believe. This then adjusts all the other settings. Telneted into the box with dcc and changed the password as openbh did not seem to work. Installed dreamsat panel via telnet and it install great. Installed linuxsat channel list with iptv and installed ncam 13.7. Both installed ok. Put my server line into ncam and channel worked fine on o.8w. Turned the dish to 19e and got tuner fail appear on screen but the channel appears on a free to air channel. Turning to an icam channel the screen clears quickly. Switching back to a free to air channel crashed the box. The box rebooted and it was up and running again. Switched back to 0.8w and channels did not, reboot the box and alls good. I then put the box into standby and waited for the blue light to go off. Works fine. Clock counting up hope it comes out of standby ok. All in all looks like a nice image.
manic01
Super VIP
- Messages
- 2,545
No one on here works for viark, so will be guessing
- Messages
- 17,533