Well master,
How should I throw this file to the device, that is, my yellow folder, will its name be changed, or will I throw it to the USB memory as it seems...
Well master,
I did as you said, but I get the file not found error... What is the solution...Put the file on usb, stick it in the receiver front slot, push menu and tab across the ch update and update from there.
did you unrar the file ?I did as you said, but I get the file not found error... What is the solution...
Ok you need to select back up/load from main screen, then chose and select your usb stick and then the file you want from the usb stick. You must make sure the dual can see the stick.I did as you said, but I get the file not found error... What is the solution...
Yes ...did you unrar the file ?
No idea can you change them are you trying to load other receiver's software or earlier versions.Which forever interface do you think is the most beautiful and useful, for example, ms diamond
I will try master, really come out, you are helping, thank you...Ok you need to select back up/load from main screen, then chose and select your usb stick and then the file you want from the usb stick. You must make sure the dual can see the stick.
You need to turn on every satellite you want to view to use usuals. Select channel search, then choose satellite, them choose motor and the select the satellite by toggling left and right and then tab down to motor and toggle left or right and select usuals. Exit out and this should allow the dish to move to that satellite.master, I have 1 motorized antenna and an external fixed antenna system, but no matter what I did, the motor does not turn to the satellites, how should the settings be?
When the receiver has finished scanning push the ok button, push the red button for satellite and then select the satellite you wish to view.While scanning the satellite, it mixes the frequencies of other satellites at the same time, I think there is an error in this software...
Been loading it up all morning testing stuff.Yes ...
No, it is not.Been loading it up all morning testing stuff.
Use Backup and Load to install it. You will then need to put in your own usuals coordinates. You wont need to turn on all sats if you get my lists to load.
Wait for the next firmware update, that issue should be fixed.My master, I sent the channel file you gave to the device, I made the usals settings, I entered the coordinates, but the dish does not return to satellites in any way. What is the dish solution?
Im posting a new channel settings list later today.My master, I sent the channel file you gave to the device, I made the usals settings, I entered the coordinates, but the dish does not return to satellites in any way. What is the dish solution?