Qviart Dual E2 Images

[kegnkiwi]

So just asking what images people are using on the Qviart Dual on the E2 side and any discussions.

Heres Mine.

Slot 1, Open Atv 7.2 (working great)
Slot 2, Egami 10.4
Slot 3, PureE2 7.3 (working great)
Slot 4 OpenBH (working great)

If often test any images i can get my hands on, both openpli and cobraliberosat images i cannot the icam channels to clear. OpenSPA is a nice image but when it goes into standby it does not come out of standby and the blue lights stays on. The Egami image is a really odd one, its very fast but i cannot get cams to install and the option to boot to another image is missing. Anyone found any other images worth a look at? I think there were some opennfr images but they seem a bit old.

One thing I am finding that is a pain is when i use my box through a 1080p hdmi splitter, the new images are coming pre set at 4k output so when the box boots I get a black screen on the tv. I get around this by using the web if remote.

 

[Ferret]

Good selection there mate.

Slot 1, Open ATV 7.3 Icam
Slot 2, OpenPLI 8.3 Oscam Emu BISS keys
Slot 3, Pure E2 7.3 Oscam

Dont use slot 4. Bad things happen when i use slot 4

 

[kegnkiwi]

Good selection there mate.

Slot 1, Open ATV 7.3 Icam
Slot 2, OpenPLI 8.3 Oscam Emu BISS keys
Slot 3, Pure E2 7.3 Oscam

Dont use slot 4. Bad things happen when i use slot 4

Can you get the Icam channels to work on 19.2 with openpli?

 

[Ferret]

Can you get the Icam channels to work on 19.2 with openpli?

Not tried, i have specific images with specific configs and OpenPli is BISS.

When i get chance ill try it for you could be Sunday now though.

 

[kegnkiwi]

Not tried, i have specific images with specific configs and OpenPli is BISS.

When i get chance ill try it for you could be Sunday now though.

I've drawn a blank with them including copying know working configs from the other images on the same receiver but i just cannot get them to clear.

 

[Ferret]

I've drawn a blank with them including copying know working configs from the other images on the same receiver but i just cannot get them to clear.

I'll have a play mate.

Are you still using ncam or did you try Oscam as well.

Oscam all the way here very seldom use Ncam.

 

[kegnkiwi]

I'll have a play mate.

Are you still using ncam or did you try Oscam as well.

Oscam all the way here very seldom use Ncam.

Tried both and or including the oscam that is within their download feed and the latest oscam available via levi45 addon manager. All the cams running ok but just nothing happening. I've even been into the oscam.server file and even enable all the readers.

 

[kegnkiwi]

I would be interesting to see if anyone else with a dual can get the icam channel working on the openpli images or cobraliberosat images. I have them working on openatv, pureE2 and Openbh.

 

[drspiros]

Slot 2, Egami 10.4

Where did you find Egami 10.4 for DUAL? thanks

 

[kegnkiwi]

Where did you find Egami 10.4 for DUAL? thanks

On one of those Tunisian websites. I can not find it posted anywhere else either. Please note though that once it's installed the option to boot to another image is not there. I switched back by doing the switching on and pressing the ok button on the remtote procedure.

 

[Ferret]

Egami dont officially support the Dual.

 

[stazeb]

Heres Mine.

Slot 1. OpenPli 8.3
Slot 2. OpenBH (working great)
Slot 3. Egami 10.4 (working great)
Slot 4. PureE2 7.3

and Android 5.0

 

[kegnkiwi]

Heres Mine.

Slot 1. OpenPli 8.3
Slot 2. OpenBH (working great)
Slot 3. Egami 10.4 (working great)
Slot 4. PureE2 7.3

and Android 5.0

Did you get any cams working on the egami image.

 

[stazeb]

Yes oscam

 

[Android.SAT.95]

I bought the decoder recently and it was new; the basic OpenATV 6.3 was present and had the Switch to Android button in the contextual menu; I reset to put OpenATV 7.3 but now the button no longer appears and to switch to Android I have to go to the Multiboot section.

How can I reset the "Switch to Android" button?

 

[cokeaddict]

I bought the decoder recently and it was new; the basic OpenATV 6.3 was present and had the Switch to Android button in the contextual menu; I reset to put OpenATV 7.3 but now the button no longer appears and to switch to Android I have to go to the Multiboot section.

How can I reset the "Switch to Android" button?

You can't, they redesigned the multiboot selector screen, so that is the only location for it now.

Currently I have:

Slot 1 OpenBh 5.3.010
Slot 2 OpenAtv 7.3
Slot 3 OpenPli Dev
Slot 4 OpenBh 5.3.007

 

[Android.SAT.95]

So it only works with ATV 6.3?

 

[kegnkiwi]

You can't, they redesigned the multiboot selector screen, so that is the only location for it now.

Currently I have:

Slot 1 OpenBh 5.3.010
Slot 2 OpenAtv 7.3
Slot 3 OpenPli Dev
Slot 4 OpenBh 5.3.007

Openatv 7.4 is available if you really want it

 

[Android.SAT.95]

Which OpenATV image should I use to have the "DualBoot" or "Switch to Android" button?

 

[Ferret]

I use 7.3 in slot 1. I just use the multiboot option and select Android.