Please Help

[roxy2642]

Dear Experts

I have Dm800 clone with sim 2.01 and m tuner. I have having problem with images after ramiMAHER-v-12- dated 6/6/11. I cant use any of the patched images after 6/6/11 except PIL from source. Please let me know how i can use the latest images.

waiting

 

[sonic99]

How do you mean you can't use any imaged after this date.??
What happens when you load one up.?

 

[roxy2642]

well everything goes fine while installing and after words. but after putting (dreambox edit) satellite channel (allready stored)i cant see any audio or video on any channel. while checking info it shows signal even it shows signal while on satfinder on all transponder but if i search it doesnt search anything.

so means this issue arises with images mentioned the date above though rami v12 working perfectly. i am follwoing all as i do with rami v12 and installing the latest images through dreamup.

please help

 

[Ferret]

I dont think this is image related to be honest but a setup issue.

What dish configuration do you have motorised or fixed ? Have you tried other channels settings do just one type ?

To help eliminate the cause try another image.

 

[roxy2642]

Dear Mate

Atlast ur there to help me up. I am sure now i am gonna find solution. Well i dont have motorized setup its fixes and has got 100.5e,95e,93e,91e,and 9e. I have tried different images (not only Rami) like Oozon,PLI (patched not from Source)etc after 6/6/2011. Even yesterday i tried latest Rami V 19 but it also shows same problem. while installing image i use serial cable with dream up and install it. Everything goes well without any error. Restart and i get new image installed. Then Networking and then through dreambox edit the channel list. Then i choose sat through Tuner configuration (i do it in right way as with other images it works perfect). So after this when i go to any channel or any satellite (configured) it shows the signal on paid as well as on FTA channels but it doesn't show any video or audio.

To check it further if i go to sat finder its shows the signal on particular sat and transponder but if search it manually it doesnt show or search any channel.

Please help as i saw yesterday the latest image from Mr Rami 19 is awesome.

Plz help one thing i wanted to share the PLI image from source even after 6/6/11 works fine and even pli image patched doesnt work.

waiting plz help

 

[Ferret]

So you have no issues with PLI thats very strange.

I was about to say i suspect the switch to be faulty but if you can configure PLI to work then im not sure what the issue is.

Maybe try use older patched drivers just to see if they work.

 

[roxy2642]

this seems that with my dm800 new images may be with driver doesnt config or identify the tuner. patching with old driver might work. Please suggest me which driver i should patch the rami V19 and how to patch the full procedure please


thanks in advance

 

[Ferret]

All im thinking is latest patched driver may not work well with a switch.

Why not rip the drivers the PLI image uses obviously this would require a install then use those on this image.

Im just thinking out loaud mate this may not cure your issue.

 

[roxy2642]

plz give me step by step procedure to follow this up

 

[mfaraj57]

i suspect the issue related to patched drivers but when you said the channels ok with openpli from source make some confusion because openpli from source used same patched drivers also
i have seen with some same problem between the sim2 patched drivers and rare types of sim2 cards or the one updated from old sim2 cards
you can install patched driver 6-5-2011 from TSpanel and see of the problem fixed or not after full reboot the dream

 

[roxy2642]

Dear Experts

thanks for your support As Suggested by Mr Mfaraj i installed latest images (Which were not working with me earlier) and then patched with patched drivers provided through TS penal. It works (Thanks to Mr Ferret and Mfaraj) But have noticed that then image has some slow running issue along with wrong time and perhaps the video quality is faded also.

So i am again back on Rami V 12 which works for me perfect> i hope the new BL will solve this problem for me and i ll be able to use all new images with latest drivers.