OPTICUM-Globo HD chat[main questions]

[dreamer1983]

pls dreamer, which orton x403p firmware allow me to add or delete satellites. Thank u

all firmware allow that you can add new freq or add new satellite just use the new User satellite there you can add new freq of channals but better use the original opticum amstar or opticum lemontree firmwares

 

[belovedsesan]

all firmware allow that you can add new freq or add new satellite just use the new User satellite there you can add new freq of channals but better use the original opticum amstar or opticum lemontree firmwares

thank u dreamer, please tell me the latest amstar and lemontree firmware.

 

[satamuse]

ALI (3602)\channel edit for ali HD

all firmware allow that you can add new freq or add new satellite just use the new User satellite there you can add new freq of channals but better use the original opticum amstar or opticum lemontree firmwares

hi Dreamer1983 and belovedsesan
why don't you try to use this prog ?

ALI (3602)\channel edit for ali HD
because i suppose it is the same prog for ALI3602A and X403p?
yumatu tool box that contains a chanel editor too ( tuncay Yldirim yumatu 3602 HD and yumatu 7101 HD)
edytor403
SabTitanEditorBolli (20110613 yumatu_canal-editor-(ali) bug fix)
regards

 

[belovedsesan]

pls dreamer and all, my x403p can only accept amstar 1.4.15 emu dated august 2011. Any attempt to upgrade to higher firmware will display download fail. Pls what do i do?
Secondly, my remote control has UHF botton, is it old or new remote? Thanks

 

[belovedsesan]

please dreamer and all, my orton x403p could only accept amstar 1.4.15 emu firmware dated august 2011. Any attempt to upgrade to higher firmwares will show download fail, what is the way out?
Secondly, my remote control unit has UHF botton, please is this new or old remote. Thank you very much.

 

[icq78354419]

all firmware allow that you can add new freq or add new satellite just use the new User satellite there you can add new freq of channals but better use the original opticum amstar or opticum lemontree firmwares

hi dreamer,
i'm glad if you can explain process of adding new satellites to the built-in list in detail
i wish to delete all those western satellites coz i live in india and i can't lock them anyway
i've put Lemontree_Proton_1.4.80_X4_newoldRem_PVRLL_EdiRC1RC2.abs on my orton x403p and i wish to control motorized dish (sg-2100) using usals

neither i see go to x command here nor i find that new user satellite command
am i using wrong /restricted firmware?

------
i got this old remote
is there any advantage of new remote over old one?
is it possible to switch to new remote for my x403p?


pls get back
thank you

 

[icq78354419]

please dreamer and all, my orton x403p could only accept amstar 1.4.15 emu firmware dated august 2011. Any attempt to upgrade to higher firmwares will show download fail, what is the way out?

download fail? why don't you upgrade via usb?
i've used it many times in last couple of days while checking different firmwares with satellite edit/add capability

have you found any way to edit/add/delete built-in satellites by the way?
i didn't understand what dreamer said in post #401 in reply to your post

Secondly, my remote control unit has UHF botton, please is this new or old remote. Thank you very much.

it is old, mine too

 

[satamuse]

channels editor Ali3602

download fail? why don't you upgrade via usb?
have you found any way to edit/add/delete built-in satellites by the way?

hi
why don't you search for a "favorites " list ?
please read my post "403" here down .
Dreamer1983 said that
in all software/firmware...
you can create yourself a "new" name of satellite and add the settings by hand.
regards

 

[satamuse]

Opticum 402-403 P HD tool box

hi ICQ.....
go there please :
http://www.sat-universe.com/attachment.php?attachmentid=289609&d=1319652782
it is :
tools for 403
regards

 

[icq78354419]

hi
why don't you search for a "favorites " list ?
please read my post "403" here down .
Dreamer1983 said that
in all software/firmware...
you can create yourself a "new" name of satellite and add the settings by hand.
regards

thank you for trying to help me out
add/edit/delete of satellites appearing in the list is what i mean that appears in usals menu in x403p (it is built in the firmware i guess)
if i can not add a satellite there with its orbital position, for eg. insat4a@83E, i can not tell the motor to go for it
i didnt understand how i can do this job in favorites
moreover in services menu i'm getting these two sub menus: services -> organizing services & organizing favourites
i'm not able to enter into any of them.. showing error message saying 'no programs'
can you please explain what dreamer meant by entering satellites manually

coming to the attachment suggested by you, it is alieditor and it is meant for editing programs lists but not satellites. right?

i read somewhere in forums that satellite list can be updated in dream boxes with some xml file (satellite.xml). do we have such facility for x403p too?

i also read somewhere that i should get the firmware designed for my region and it will have all the reachable satellites for that region. is that true?
i live in india. where can i find a firmware with all those satellites between 10E to 160E if the above argument is true?

----
as for alieditor, it is asking for some .udf file but the image i saved in thumb drive is a .bin file
how should i extract .udf from the receiver?
can you point me to some instruction/guide for saving and restoring lists after firmware upgrades pls?

pls excuse my basic knowledge.. i'm totally new here
thanks again

 

[satamuse]

channels editor

hi
the channels editor is the same editor for x403 and ALI 3602.
with the editor , you can "capture-download" the channels list FROM your x403 receiver !
in the program , clic on "file" , "open" choose "udf" if you have one file udf
or
choose "process" and to download into the PC choose : " upload stb to PC " !

in "all services " / "satellite information , you will find all the existing satellites !

insat4a@83E if it is at 83E....it is not in my (old) list !
but you will find all the needed services,video,info at
kingofsat.net or lynsat.com

please tell me if it is ok or PM !
regards

thank you for trying to help me out
add/edit/delete of satellites appearing in the list is what i mean that appears in usals menu in x403p (it is built in the firmware i guess)
if i can not add a satellite there with its orbital position, for eg. insat4a@83E, i can not tell the motor to go for it
i didnt understand how i can do this job in favorites
moreover in services menu i'm getting these two sub menus: services -> organizing services & organizing favourites
i'm not able to enter into any of them.. showing error message saying 'no programs'
can you please explain what dreamer meant by entering satellites manually

coming to the attachment suggested by you, it is alieditor and it is meant for editing programs lists but not satellites. right?

i read somewhere in forums that satellite list can be updated in dream boxes with some xml file (satellite.xml). do we have such facility for x403p too?

i also read somewhere that i should get the firmware designed for my region and it will have all the reachable satellites for that region. is that true?
i live in india. where can i find a firmware with all those satellites between 10E to 160E if the above argument is true?

----
as for alieditor, it is asking for some .udf file but the image i saved in thumb drive is a .bin file
how should i extract .udf from the receiver?
can you point me to some instruction/guide for saving and restoring lists after firmware upgrades pls?

pls excuse my basic knowledge.. i'm totally new here
thanks again

 

[icq78354419]

hi
the channels editor is the same editor for x403 and ALI 3602.
with the editor , you can "capture-download" the channels list FROM your x403 receiver !
in the program , clic on "file" , "open" choose "udf" if you have one file udf
or
choose "process" and to download into the PC choose : " upload stb to PC " !

in "all services " / "satellite information , you will find all the existing satellites !

insat4a@83E if it is at 83E....it is not in my (old) list !
but you will find all the needed services,video,info at
kingofsat.net or lynsat.com

please tell me if it is ok or PM !
regards

thanks for reply satamuse. pls let me know:

a) how to extract/create that .udf file from receiver?

b) alieditor can only connect on null cable and doesn't work on ethernet. right?

c) i love to edit channels and put them back on receiver but my main concern is to add/edit/delete satellites already present in the firmware. can i do this with alieditor?
i want insat4a satellite (83E) to appear in x403p satellite list

pls get back
thanks again

 

[satamuse]

how to extract channels

hi

a) how to extract/create that .udf file from receiver?

choose "process" and to download into the PC choose : " upload stb to PC " !

regards

 

[satamuse]

how to "send" channels

hi

b) alieditor can only connect on null cable and doesn't work on ethernet. right?
you can do it on rs232c .
first choose "setting" and setup all (com1...........115000..... aso....)
choose in "download ABS setting"===>"user database"
(you can backup the old base on your PC).
then , you choose "process" and " download file "PC===>STB"
do you have USB port on the x403 , then it is 1000 times easier to do on usb and 1000 times quick !!!!
" !

regards

 

[satamuse]

how to edit-add-delete-move channels

hi
c) i love to edit channels and put them back on receiver but my main concern is to add/edit/delete satellites already present in the firmware. can i do this with alieditor?
i want insat4a satellite (83E) to appear in x403p satellite list

yes , you can

clic on "all services"
clic on "satellite information"
clic on " + " of "satellite information"
RIGHTclic on (for exemple) " nilesat 7w "
you will be able to
"edit"
"add"
"delete"
"move"

regards

 

[icq78354419]

do you have USB port on the x403 , then it is 1000 times easier to do on usb and 1000 times quick !!!!

do you mean i should connect usb on pc to usb on receiver?
or use usb-serial emulator on pc and connect receiver to pc with null modem cable?

 

[icq78354419]

yes , you can

clic on "all services"
clic on "satellite information"
clic on " + " of "satellite information"
RIGHTclic on (for exemple) " nilesat 7w "
you will be able to
"edit"
"add"
"delete"
"move"

oh my god! this is what i look for
let me get that usb-serial emulator and a null cable to try out what you explained

thank you
mean while pls let me know if i can connect usb(pc) to usb(receiver) without ever using these serial cables

 

[satamuse]

how to edit-add-delete-move channels or scan

hi
the best way should be to simply "point" to the desired satellite .
you create the name of the desired "satellite" and you create one
transponder with the complete settings for one frequency of transponder.
it is the "NIT"
then you will "see" the "new satellite" while "zapping" the sky from 80E "express am2" to "yamal 102"
regards
i will search for the frequency of your 83E

hi
c) i love to edit channels and put them back on receiver but my main concern is to add/edit/delete satellites already present in the firmware. can i do this with alieditor?
i want insat4a satellite (83E) to appear in x403p satellite list

yes , you can

clic on "all services"
clic on "satellite information"
clic on " + " of "satellite information"
RIGHTclic on (for exemple) " nilesat 7w "
you will be able to
"edit"
"add"
"delete"
"move"

regards

 

[satamuse]

usb connector

do you mean i should connect usb on pc to usb on receiver?
or use usb-serial emulator on pc and connect receiver to pc with null modem cable?

hi
i do not know if your x403 has a usb connector included !!!!!
my yumatu ALI 3602a has a usb connector build-in and it is much more easier than serial
when receiver has a USB included , the receiver has a menu that enable you to to do all throught usb port of the RECEIVER !!!!!
in a few seconds!
regards

 

[satamuse]

flash throught usb

oh my god! this is what i look for
let me get that usb-serial emulator and a null cable to try out what you explained

thank you
mean while pls let me know if i can connect usb(pc) to usb(receiver) without ever using these serial cables

hi
it seems you have an "USB" port on your receiver !!!

you use the prog on the PC
you add-modify-delete what you want
you copy the result file on a USB key
you input your USB key in the receiver
you choose "update favorites"
that's all

regards