Ncam Emu compiled and patched by READ

  • Thread starter ooOO_SORGOS_OOoo
  • Start date

WaRp

(⊃。•́‿•̀。)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
30,869
New files from READ to support

-arm-marvell (Synology DS114, DS214 and similar)

Thanks READ
 

WaRp

(⊃。•́‿•̀。)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
30,869
Ncam 11.3 compiled and patched by READ

-updated cx-aio-v09.2.6
-small fix for CAK7 Cards HD03/04/05 refresh valid to date
(the recommendation remains to enable shared and disable global emm)
-Updated Android stapi pvu
(Try to Solve Audio issues in some channels)
-Updated: Multics detection
(added to the detected multics, protocol = mgcamd_mcs or newcamd_mcs,
removed: protocol = cccam_mcs_HB and Multics client detection (does not send unique IDs in client mode))
-Updated: Newcamd NCam (Stealth mode)
-fix camd35/ext mode
-webif cache-size / reader page for lg-flagged CWs​
 

WaRp

(⊃。•́‿•̀。)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
30,869
Ncam 11.4 compiled and patched by READ

-New (Exclusive) feature on Ncam
*(Searching, Fetching, Reading and running Free C: line server from net)
-Small fix for (lg) detection
-Fixed unode_id (...)
-Fix prevent buffer overflow
-Fix cl->reader->cacheex.maxhop_lg > max never used
-Need PIN on 092F and 091F caid's fixed
-Updated aio
-patch for common bugs reported by scan-build
-fix typos move debug logoutput to debug
-small fix for ecm-whitelist
-Updated: Android stapi, CW type
-small correction (do not have the same user and pass)​
 

WaRp

(⊃。•́‿•̀。)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
30,869
Ncam 11.4 compiled and patched by READ

-New (Exclusive) feature on Ncam
*(Searching, Fetching, Reading and running Free C: line server from net)
-Small fix for (lg) detection
-Fixed unode_id (...)
-Fix prevent buffer overflow
-Fix cl->reader->cacheex.maxhop_lg > max never used
-Need PIN on 092F and 091F caid's fixed
-Updated aio
-patch for common bugs reported by scan-build
-fix typos move debug logoutput to debug
-small fix for ecm-whitelist
-Updated: Android stapi, CW type
-small correction (do not have the same user and pass)​

The ncam support now just some sites which give free c: line (Beta Test)
So You can find it inside /etc/tuxbox/config/CCcam.cfg file
All sites are disable (default settings) If you Enable and site just remove # from the beginning of the line the restart ncam

Thanks READ

1-0-19-7533-426-1-C00000-0-0-0-20201031172937.jpg
 

Serjoga

Latvian satfan
Staff member
Moderator
Messages
6,101
Ncam V11.5


-A lot of Fixes-Change CCcam.cfg free server (You need to update CCcam.cfg) New config file from first post

Now the Free servers name inside CCcam.cfg Should be like this

#SERVER1
#SERVER2
#SERVER3
#SERVER4
#SERVER5
#SERVER6
 

WaRp

(⊃。•́‿•̀。)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
30,869
New Files
V_11.5_r2 for *ipk
V_11.5_r1 for *deb



-Update Ipk and deb files,now ncam works well on VU BH + VTI

Thanks READ
 

zvonko67

Well Known Member
Messages
1,802
Ncam V11.6

-Fix some bugs
-Update/Add some Free seever sites
-Now ncam can be downlaod and read softcam.key direct from net (see ncam.server)
-Add New file ncam.fs for free server works same as CCcam.cfg
(All Free Servers you can enable/disable from ncam.fs, And CCCam.cfg keep it for the private buy C Lines)

*******************


Here are Only Bin file ..


mips (Gigablue-Dream-VU+-Xtrend-Formuler)

sh4 & SPARK (Golden Media-Galaxy innovations-Amiko)



sh4-stapi (xcruiser 400plus, Forever 7878, 7474, 7420, 7830 8200, 9510)


sh4-stapi5 (Cardiff/Avant) (Forever[9898, 3434, Nano Smart])


cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT + RaspberryPI Hardware FPU)


aarch64-ARM (VU+4K Duo4K + osmio4k)


x86-Linux-pc (32bit-i686)


x86-Linux-pc (64bit)

mips (Tiviar plus and similar)

mipszrouter (Routers Mipsel DD-WRT)



ncam.gx-csky (uClan (U2C) Denys H.265)

arm-marvell (Synology DS114, DS214 and similar)



************************************************** ***************************
************** Bin files for Android Devices Only **************
************************************************** ***************************


Amiko A3 (4.4_KitKat)


Amiko A4 (5.1_Lollipop)


Amiko A5 (7.0_Nougat)


WeTekPlay2 WeOS-v2 (5.0-Lollipop)


WeTekPlay2 WeOS-v3 (6.0-Marshmallow)


----- Android stapi -----



4.4-KitKat-Androideabi19-stapi


5.1-Lollipop-stapi


7.0-Nougat-stapi


5.0-Lollipop-stapi


6.0-Marshmallow-stapi


Icone-Iron-stapi


************************************************** **************
************** Ncam with libusb-pcsc**************
************************************************** **************


cortexa9hf-vfp-neon-ARM-libusb-pcsc (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT + RaspberryPI Hardware FPU)


*******************************************
****************config Files**************
*******************************************


Config File For All devices


Config File For SH4 Only



Config File For Android Only

Config File For Android-Stapi Only (By samur)
 

kargo.25

Super VIP
Messages
9,725
Add ncam for windows ...

How to use it:
1-Download file
2-Extract all files inside and folder you want (Don't remove and files)
3-Just run (ncam-11.6-r1-x86_64-pc-cygwin.exe-libcurl-libusb-pcsc.exe) file double click.


P.s: I do not use Windows So I can not support it (ncam config files may need to update)



************************************************** *****************
**************Ncam For Windows**************
************************************************** *****************


Built on Windoes 10
 

kargo.25

Super VIP
Messages
9,725
Ncam 11.7 compiled and patched READ

NcamV11.7


-Update URL for Free Servers
-[powervu] Fixed emm algo
-Add emu BISS2 (Best Test)
-repeat to ask all gbox readers again during fallback time (Thank's chimpie232)
-Fix: read the SoftCam.Key file in the url and the SoftCam.Key file in the configuration folder
-Fix: cccam cfg path
-Add TotalTV Serbia (0911) ATR to reader-videoguard-common
-Adding CAID 0961 & CAID 09BB Sky Uk and Airtel India



*******************


Here are Only Bin file ..


mips (Gigablue-Dream-VU+-Xtrend-Formuler)

sh4 & SPARK (Golden Media-Galaxy innovations-Amiko)


sh4-stapi (xcruiser 400plus, Forever 7878, 7474, 7420, 7830 8200, 9510)


sh4-stapi5 (Cardiff/Avant) (Forever[9898, 3434, Nano Smart])


cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT + RaspberryPI Hardware FPU)


aarch64-ARM (VU+4K Duo4K + osmio4k)


x86-Linux-pc (32bit-i686)


x86-Linux-pc (64bit)

mips (Tiviar plus and similar)

mipszrouter (Routers Mipsel DD-WRT)


ncam.gx-csky (uClan (U2C) Denys H.265)

arm-marvell (Synology DS114, DS214 and similar)


arm-Coreelec (Mecool KIII Pro , Magicsee N5 Max and similar)



************************************************** ***************************
************** Bin files for Android Devices Only **************
************************************************** ***************************


Amiko A3 (4.4_KitKat)


Amiko A4 (5.1_Lollipop)


Amiko A5 (7.0_Nougat)


WeTekPlay2 WeOS-v2 (5.0-Lollipop)


WeTekPlay2 WeOS-v3 (6.0-Marshmallow)


----- Android stapi -----



4.4-KitKat-Androideabi19-stapi


5.1-Lollipop-stapi


7.0-Nougat-stapi


5.0-Lollipop-stapi


6.0-Marshmallow-stapi


Icone-Iron-stapi


************************************************** **************
************** Ncam with libusb-pcsc**************
************************************************** **************


cortexa9hf-vfp-neon-ARM-libusb-pcsc (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT + RaspberryPI Hardware FPU)


************************************************** *****************
************** Ncam For Windows **************
************************************************** *****************


Windows 64Bit

Windows 32Bit


*******************************************
**************** config Files **************
*******************************************

Config File For All devices OE2.0

Config File For DreamOS OE2.5

Config File For SH4 Only

Config File For Android Only

Config File For Android-Stapi Only (By samur)

Config File For Windows
 

WaRp

(⊃。•́‿•̀。)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
30,869
Ncam V11.7
-Update URL for Free Servers
-[powervu] Fixed emm algo
-Add emu BISS2 (Best Test)
-repeat to ask all gbox readers again during fallback time (Thank's chimpie232)
-Fix: read the SoftCam.Key file in the url and the SoftCam.Key file in the configuration folder
-Fix: cccam cfg path
-Add TotalTV Serbia (0911) ATR to reader-videoguard-common
-Adding CAID 0961 & CAID 09BB Sky Uk and Airtel India


************** Bin files for Android Devices Only **************

Amiko A3 (4.4_KitKat)
Amiko A4 (5.1_Lollipop)
Amiko A5 (7.0_Nougat)
WeTekPlay2 WeOS-v2 (5.0-Lollipop)
WeTekPlay2 WeOS-v3 (6.0-Marshmallow)


----- Android stapi -----


4.4-KitKat-Androideabi19-stapi
5.1-Lollipop-stapi
7.0-Nougat-stapi
5.0-Lollipop-stapi
6.0-Marshmallow-stapi
Icone-Iron-stapi

************** Ncam with libusb-pcsc **************

cortexa9hf-vfp-neon-ARM-libusb-pcsc (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT + RaspberryPI Hardware FPU)

************** Ncam For Windows **************

Windows 64Bit
Windows 32Bit
 

kalkan99

VIP
Messages
1,877
Update ...



Ncam V11.8

Code:
-update URL (25.02.2021)"
-Fixed SoftCam.Key (url) cut file name"
-fixind srvid on Radegast Module by Adding srvid because ECM contains0000"
-webif-cacheex-client.reader-description-fix v1"
(add else conditions)"
-[biss] Changed tsid-onid combo validation"
-[gbx] - add dynamic card update/exchange"
* rearrange hello scheme
* add peer specific ccc reshare ident filter
* fix major bug in send hello msg
* correct checkcode calculation
* change some default settings
* add optional send msg Here? to selected peers"
-Fix need pin for 0961"
(reader) 0961_sky [videoguard2] classD3 ins54: no cw --> Card needs pin)"
-[dvbapi] Updated extension descriptor tags"
(In accordance with ETSI EN 300 468 V1.16.1, table 109.)"
-[powervu] Added some missing hash modes"
-[streamserver] Synced extension descriptor tags with the dvbapi code"



Ncam-Images-IPK
http://www.mediafire.com/file/ke0f3n2u8sqbxsr/Ncam-Images-MIPS-IPK.zip/file

NCam-Images-OSDreambox-DEB
http://www.mediafire.com/file/gao9in2ggw2yg6m/NCam-Images-OSDreambox-DEB.zip/file

(mips (Gigablue-Dream-VU+-Xtrend-Formuler
http://www.mediafire.com/file/9t58bzw4gvl3wk3/ncam.mips.zip/file

(sh4 & SPARK (Golden Media-Galaxy innovations-Amiko
http://www.mediafire.com/file/j8oydmwseb3zlvv/ncam.sh4.zip/file

(sh4-stapi (xcruiser 400plus, Forever 7878, 7474, 7420, 7830 8200, 9510
http://www.mediafire.com/file/9d320iypn0v7u75/ncam.sh4-stapi.zip/file

([sh4-stapi5 (Cardiff/Avant) (Forever[9898, 3434, Nano Smart
http://www.mediafire.com/file/pbkdcfwox523cvp/ncam.sh4-Cardiff.zip/file

(cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT + RaspberryPI Hardware FPU
http://www.mediafire.com/file/q4fwhi283n182d1/ncam.cortexa9hf-vfp-neon.zip/file

(aarch64-ARM (VU+4K Duo4K + osmio4k
http://www.mediafire.com/file/13gbfl1kl17l7fl/ncam.aarch64.zip/file

(x86-Linux-pc (32bit-i686
http://www.mediafire.com/file/9fhw0pvh300hb1u/ncam.x86_64.zip/file

(x86-Linux-pc (64bit
http://www.mediafire.com/file/9fhw0pvh300hb1u/ncam.x86_64.zip/file

(mips (Tiviar plus and similar
http://www.mediafire.com/file/j5gdp5f5mdvvhuy/ncam.mips-uclibc.zip/file

(mips-router (Routers Mipsel DD-WRT
http://www.mediafire.com/file/jct5na2ycezqnq6/ncam-router.mips.zip/file

(arm-marvell (Synology DS114, DS214 and similar
http://www.mediafire.com/file/4iua2nr5duaytge/ncam.arm-marvell.zip/file

(arm-Coreelec (Mecool KIII Pro , Magicsee N5 Max and similar
http://www.mediafire.com/file/ynvt4d67izn195t/ncam.cortexa9hf-vfp-neon-Openssl11.zip/file

(ncam.gx-csky (uClan (U2C) Denys H.265 (edision primo, Octagons; SX88, SX88+, SX88+ Optima, SX88+ Combo
https://www.mediafire.com/file/mfnv7xxt53xokhb/ncam.gx-csky.zip/file
 

WaRp

(⊃。•́‿•̀。)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
30,869
Ncam 11.9 compiled and patched by READ

-Fix compile error (undefined-reference-to-'_binary_SoftCam_Key_start')
-powervu sharing is blocked (Not Services)
(Add this reader into the ncam.services file)
*My Config files updated already (no need to add it again)
*After this fix should be Ncam read powervu and update keys direct from softcam,key no need to read it from (ncam.fs or CCcam.cfg). So more fast to update keys
...
[emulator]
caid = 0E00
provid =
srvid =
...
-dvbapi FBC Tuner fix (oscam@11691)​
 

WaRp

(⊃。•́‿•̀。)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
30,869
Ncam V13.0

-updated cmake curl
-Show curl in ncam.version
-Some improvement for Android devices
-If CCcam.cfg is disabled, it cannot be edited on the web interface



********************
P.s:*No more bin for openssl1.1 (all bin files will be works on all image openssl old/new)
********************

********************
*Here are Only Bin file ..
*mips (Gigablue-Dream-VU+-Xtrend-Formuler)
sh4 & SPARK (Golden Media-Galaxy innovations-Amiko)

*sh4-stapi (xcruiser 400plus, Forever 7878, 7474, 7420, 7830 8200, 9510)
*sh4-stapi5 (Cardiff/Avant) (Forever[9898, 3434, Nano Smart])
*sh4-stapi5_V03 (Cardiff/Avant)
*cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Osmio4k + Routers Mipsel DD-WRT + RaspberryPI Hardware FPU)
*aarch64-ARM (VU+4K Duo4K*+ DreamOne/Two/7)
*x86-Linux-pc (32bit-i686
*x86-Linux-pc (64bit
*mips (Tiviar plus and similar
*mipszrouter (Routers Mipsel DD-WRT

*ncam.gx-csky (uClan (U2C) Denys H.265, Octagon SX88, SX88+, SX88+ Optima, SX88+ Combo, ASAT HDR No.1)
*arm-marvell (Synology DS114, DS214 and similar)
*arm-Coreelec (Mecool KIII Pro*, Magicsee N5 Max and similar)

******************************************************************************
*************** Bin files for*Android*Devices Only **************

*****************************************************************************

*Amiko A3 (4.4_KitKat)
*Amiko A4 (5.1_Lollipop)
*Amiko A5 (7.0_Nougat)
*WeTekPlay2 WeOS-v2 (5.0-Lollipop)
*WeTekPlay2 WeOS-v3 (6.0-Marshmallow)
*
-----*Android*stapi -----

*4.4-KitKat-Androideabi19-stapi
*5.1-Lollipop-stapi
*7.0-Nougat-stapi
*5.0-Lollipop-stapi
*6.0-Marshmallow-stapi
*Icone-Iron-stapi
*
****************************************************************
*************** Ncam with*libusb-pcsc***************

****************************************************************
*cortexa9hf-vfp-neon-ARM-libusb-pcsc*(DreamoxUHD*+*VU+4K*+*Routers Mipsel DD-WRT*+*RaspberryPI Hardware FPU)

*******************************************************************
****************Ncam For Windows***************

*******************************************************************
*Windows*64Bit
*Windows*32Bit

********************************************
******************config Files***************
********************************************
*Config File For*All*devices*OE2.0
*Config File For*DreamOS*OE2.5
*Config File For*SH4*Only

*Config File For*SH4-Stapi*Only*(Mod BY sheypooor)
*Config File For*Android*Only
*Config File For*Android-Stapi*Only*(Mod BY samur)
*Config File For*Windows
 

Attachments

  • enigma2-plugin-softcams-ncam_V13.0-r0_all.ipk
    4.7 MB · Views: 15
  • enigma2-plugin-softcams-ncam-osdreambox_V13.0-r0.deb
    2.9 MB · Views: 10

WaRp

(⊃。•́‿•̀。)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
30,869
Ncam V13.1

-Correction for ICAM ECMs for NDS
-EMM Support for Suisse V7 Card
-Fix for Viaccess EMM Update < V7 broken
-Add support iCam Thank you (icb) author of patch

P.s: I did not tested iCam feature. But config file I have update it with iCam settings


*******************
Here are Only Bin file ..

mips (Gigablue-Dream-VU+-Xtrend-Formuler)
sh4 & SPARK (Golden Media-Galaxy innovations-Amiko)
sh4-stapi (xcruiser 400plus, Forever 7878, 7474, 7420, 7830 8200, 9510)
sh4-stapi5 (Cardiff/Avant) (Forever[9898, 3434, Nano Smart])
sh4-stapi5_V03 (Cardiff/Avant)
cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Osmio4k + Routers Mipsel DD-WRT + RaspberryPI Hardware FPU)
aarch64-ARM (VU+4K Duo4K + DreamOne/Two/7)
x86-Linux-pc (32bit-i686
x86-Linux-pc (64bit
mips (Tiviar plus and similar
mipszrouter (Routers Mipsel DD-WRT
ncam.gx-csky (uClan (U2C) Denys H.265, Octagon SX88, SX88+, SX88+ Optima, SX88+ Combo, ASAT HDR No.1)
arm-marvell (Synology DS114, DS214 and similar)
arm-Coreelec (Mecool KIII Pro , Magicsee N5 Max and similar)


*****************************************************************************
************** Bin files for Android Devices Only **************
*****************************************************************************

Amiko A3 (4.4_KitKat)
Amiko A4 (5.1_Lollipop)
Amiko A5 (7.0_Nougat)
WeTekPlay2 WeOS-v2 (5.0-Lollipop)
WeTekPlay2 WeOS-v3 (6.0-Marshmallow)


----- Android stapi -----

4.4-KitKat-Androideabi19-stapi
5.1-Lollipop-stapi
7.0-Nougat-stapi
5.0-Lollipop-stapi
6.0-Marshmallow-stapi
Icone-Iron-stapi


****************************************************************
************** Ncam with libusb-pcsc **************
****************************************************************

cortexa9hf-vfp-neon-ARM-libusb-pcsc (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT + RaspberryPI Hardware FPU)

*******************************************************************
************** Ncam For Windows **************
*******************************************************************

Windows 64Bit
Windows 32Bit
 

Attachments

  • Ncam-Images-IPK.zip
    4.7 MB · Views: 87
  • NCam-Images-OSDreambox-DEB.zip
    2.9 MB · Views: 27

WaRp

(⊃。•́‿•̀。)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
30,869
Ncam V13.2

-Some fixes
-iCam work with (DVBAPI and Radegast)

image settings for open source image
Radegast:

Set Integrate ECM in HTTP streams to YES
Decrypt HTTP Streams NO
Decrypt received HTTP streams NO​
DVBApi:

Set Integrate ECM in HTTP streams to NO
Decrypt HTTP Streams YES
Decrypt received HTTP streams NO​


Here are Only Bin file ..

mips (Gigablue-Dream-VU+-Xtrend-Formuler)
sh4 & SPARK (Golden Media-Galaxy innovations-Amiko)
sh4-stapi (xcruiser 400plus, Forever 7878, 7474, 7420, 7830 8200, 9510)
sh4-stapi5 (Cardiff/Avant) (Forever[9898, 3434, Nano Smart])
sh4-stapi5_V03 (Cardiff/Avant)
cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Osmio4k + Routers Mipsel DD-WRT + RaspberryPI Hardware FPU)
aarch64-ARM (VU+4K Duo4K + DreamOne/Two/7)
x86-Linux-pc (32bit-i686
x86-Linux-pc (64bit
mips (Tiviar plus and similar
mipszrouter (Routers Mipsel DD-WRT
ncam.gx-csky (uClan (U2C) Denys H.265, Octagon SX88, SX88+, SX88+ Optima, SX88+ Combo, ASAT HDR No.1)
arm-marvell (Synology DS114, DS214 and similar)
arm-Coreelec (Mecool KIII Pro , Magicsee N5 Max and similar)


*****************************************************************************
************** Bin files for Android Devices Only **************
*****************************************************************************
Amiko A3 (4.4_KitKat)
Amiko A4 (5.1_Lollipop)
Amiko A5 (7.0_Nougat)
WeTekPlay2 WeOS-v2 (5.0-Lollipop)
WeTekPlay2 WeOS-v3 (6.0-Marshmallow)


----- Android stapi -----

4.4-KitKat-Androideabi19-stapi
5.1-Lollipop-stapi
7.0-Nougat-stapi
5.0-Lollipop-stapi
6.0-Marshmallow-stapi
Icone-Iron-stapi


****************************************************************
************** Ncam with libusb-pcsc **************
****************************************************************

cortexa9hf-vfp-neon-ARM-libusb-pcsc (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT + RaspberryPI Hardware FPU)

*******************************************************************
************** Ncam For Windows **************
*******************************************************************
Windows 64Bit
Windows 32Bit
 

Attachments

  • enigma2-plugin-softcams-ncam_V13.2-r0_all.ipk
    4.7 MB · Views: 79
  • enigma2-plugin-softcams-ncam-osdreambox_V13.2-r0.deb
    2.9 MB · Views: 32

WaRp

(⊃。•́‿•̀。)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
30,869
New Update
V.13.2_r1


-changes in ncam.server & dvb files

Thanks READ
 

Attachments

  • enigma2-plugin-softcams-ncam_V13.2-r1_all.ipk
    4.7 MB · Views: 98
  • enigma2-plugin-softcams-ncam_V13.2-r1_all.deb
    2.9 MB · Views: 45

WaRp

(⊃。•́‿•̀。)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
30,869
Ncam V13.3

-NEON is now used for ARM CPUs. These are special parts of the CPU that can execute certain code faster. This helps with decryption. From my point of view, the load on my sf8008 drops a bit. If you want to compare it, then always with the same station and preferably the same show. The load varies greatly from transmitter to transmitter. This means that 128 packets are decrypted at the same time and not 32 as before.
As far as I've read, Mipsel Broadcom boxes don't have this type of processing. With Mipsel I wouldn't use Radegast (if possible) and I wouldn't even compile it at all (Thanks to @icb)
- When zapping to a station with a pause, you don't have to wait for the 30 second timeout before the tuner is released again (Thanks to @icb)
- Optimization mostly for MIPS boxes (Thanks to @icb)


Here are Only Bin file ..
mips (Gigablue-Dream-VU+-Xtrend-Formuler)
sh4 & SPARK (Golden Media-Galaxy innovations-Amiko)
sh4-stapi (xcruiser 400plus, Forever 7878, 7474, 7420, 7830 8200, 9510)
sh4-stapi5 (Cardiff/Avant) (Forever[9898, 3434, Nano Smart])
sh4-stapi5_V03 (Cardiff/Avant)
cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Osmio4k + Routers Mipsel DD-WRT + RaspberryPI Hardware FPU)
aarch64-ARM (VU+4K Duo4K + DreamOne/Two/7)
x86-Linux-pc (32bit-i686
x86-Linux-pc (64bit
mips (Tiviar plus and similar
mipszrouter (Routers Mipsel DD-WRT
ncam.gx-csky (uClan (U2C) Denys H.265, Octagon SX88, SX88+, SX88+ Optima, SX88+ Combo, ASAT HDR No.1)
arm-marvell (Synology DS114, DS214 and similar)
arm-Coreelec (Mecool KIII Pro , Magicsee N5 Max and similar)

************** Bin files for
Android Devices Only **************
Amiko A3 (4.4_KitKat)
Amiko A4 (5.1_Lollipop)
Amiko A5 (7.0_Nougat)
WeTekPlay2 WeOS-v2 (5.0-Lollipop)
WeTekPlay2 WeOS-v3 (6.0-Marshmallow)

----- Android stapi -----
4.4-KitKat-Androideabi19-stapi
5.1-Lollipop-stapi
7.0-Nougat-stapi
5.0-Lollipop-stapi
6.0-Marshmallow-stapi
Icone-Iron-stapi

************** Ncam with
libusb-pcsc **************
cortexa9hf-vfp-neon-ARM-libusb-pcsc (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT + RaspberryPI Hardware FPU)


**************
Ncam For Windows **************
Windows 64Bit
Windows 32Bit
 

Attachments

  • enigma2-plugin-softcams-ncam_V13.3-r0_all.ipk
    4.9 MB · Views: 61
  • enigma2-plugin-softcams-ncam-osdreambox_V13.3-r0.deb
    3.1 MB · Views: 29

WaRp

(⊃。•́‿•̀。)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
30,869
Ncam V13.4

-Added new ATR (Refresh some Prov. Info)
-Fixes (hopefully) the problems of v7. And there is a switch in the configuration menu to turn off ARM NEON support (can remain switched on for Mipsel/PC/...)

Here are Only Bin file ..

mips (Gigablue-Dream-VU+-Xtrend-Formuler)
sh4 & SPARK (Golden Media-Galaxy innovations-Amiko)
sh4-stapi (xcruiser 400plus, Forever 7878, 7474, 7420, 7830 8200, 9510)
sh4-stapi5 (Cardiff/Avant) (Forever[9898, 3434, Nano Smart])
sh4-stapi5_V03 (Cardiff/Avant)
cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Osmio4k + Routers Mipsel DD-WRT + RaspberryPI Hardware FPU)
aarch64-ARM (VU+4K Duo4K + DreamOne/Two/7)
x86-Linux-pc (32bit-i686
x86-Linux-pc (64bit
mips (Tiviar plus and similar
ncam.gx-csky (uClan (U2C) Denys H.265, Octagon SX88, SX88+, SX88+ Optima, SX88+ Combo, ASAT HDR No.1)
arm-marvell (Synology DS114, DS214 and similar)
arm-Coreelec (Mecool KIII Pro , Magicsee N5 Max and similar)

************** Bin files for
Android Devices Only **************

Amiko A3 (4.4_KitKat)
Amiko A4 (5.1_Lollipop)
Amiko A5 (7.0_Nougat)
WeTekPlay2 WeOS-v2 (5.0-Lollipop)
WeTekPlay2 WeOS-v3 (6.0-Marshmallow)

----- Android stapi -----

4.4-KitKat-Androideabi19-stapi
5.1-Lollipop-stapi
7.0-Nougat-stapi
5.0-Lollipop-stapi
6.0-Marshmallow-stapi
Icone-Iron-stapi

************** Ncam with
libusb-pcsc **************

cortexa9hf-vfp-neon-ARM-libusb-pcsc (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT + RaspberryPI Hardware FPU)

**************
Ncam For Windows **************
Windows 64Bit
Windows 32Bit
 

Attachments

  • enigma2-plugin-softcams-ncam_V13.4-r0_all.ipk
    5 MB · Views: 145
  • enigma2-plugin-softcams-ncam-osdreambox_V13.4-r0.deb
    3.1 MB · Views: 57

WaRp

(⊃。•́‿•̀。)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
30,869
Ncam V13.5

-Add Patch V9 for iCam's


Here are Only Bin file ..

mips (Gigablue-Dream-VU+-Xtrend-Formuler)
sh4 & SPARK (Golden Media-Galaxy innovations-Amiko)
sh4-stapi (xcruiser 400plus, Forever 7878, 7474, 7420, 7830 8200, 9510)
sh4-stapi5 (Cardiff/Avant) (Forever[9898, 3434, Nano Smart])
sh4-stapi5_V03 (Cardiff/Avant)
cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Osmio4k + Routers Mipsel DD-WRT + RaspberryPI Hardware FPU)
aarch64-ARM (VU+4K Duo4K + DreamOne/Two/7)
x86-Linux-pc (32bit-i686
x86-Linux-pc (64bit
mips (Tiviar plus and similar
ncam.gx-csky (uClan (U2C) Denys H.265, Octagon SX88, SX88+, SX88+ Optima, SX88+ Combo, ASAT HDR No.1)
arm-marvell (Synology DS114, DS214 and similar)
arm-Coreelec (Mecool KIII Pro , Magicsee N5 Max and similar)


*****************************************************************************
************** Bin files for Android Devices Only **************
*****************************************************************************

Amiko A3 (4.4_KitKat)
Amiko A4 (5.1_Lollipop)
Amiko A5 (7.0_Nougat)
WeTekPlay2 WeOS-v2 (5.0-Lollipop)
WeTekPlay2 WeOS-v3 (6.0-Marshmallow)

----- Android stapi -----

4.4-KitKat-Androideabi19-stapi
5.1-Lollipop-stapi
7.0-Nougat-stapi
5.0-Lollipop-stapi
6.0-Marshmallow-stapi
Icone-Iron-stapi


****************************************************************
************** Ncam with libusb-pcsc **************
****************************************************************
cortexa9hf-vfp-neon-ARM-libusb-pcsc (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT + RaspberryPI Hardware FPU)

*******************************************************************
************** Ncam For Windows **************
*******************************************************************
Windows 64Bit
Windows 32Bit
 

Attachments

  • enigma2-plugin-softcams-ncam_V13.5-r0_all.ipk
    5 MB · Views: 206
  • enigma2-plugin-softcams-ncam-osdreambox_V13.5-r0.deb
    3.1 MB · Views: 105

kalkan99

VIP
Messages
1,877
Update ...


Ncam V13.6


- android-stapi: warning in debug dvbapi


- Compile Ncam without softcam.key built in

thanks fairbird

Here are Only Bin file ..



mips (Gigablue-Dream-VU+-Xtrend-Formuler)

sh4 & SPARK (Golden Media-Galaxy innovations-Amiko)



sh4-stapi (xcruiser 400plus, Forever 7878, 7474, 7420, 7830 8200, 9510)



sh4-stapi5 (Cardiff/Avant) (Forever[9898, 3434, Nano Smart])



sh4-stapi5_V03 (Cardiff/Avant)



cortexa9hf-vfp-neon-ARM (DreamoxUHD + VU+4K + Osmio4k + Routers Mipsel DD-WRT + RaspberryPI Hardware FPU)



aarch64-ARM (VU+4K Duo4K + DreamOne/Two/7)



x86-Linux-pc (32bit-i686



x86-Linux-pc (64bit


mips (Tiviar plus and similar

ncam.gx-csky (uClan (U2C) Denys H.265, Octagon SX88, SX88+, SX88+ Optima, SX88+ Combo, ASAT HDR No.1)



arm-marvell (Synology DS114, DS214 and similar)



arm-Coreelec (Mecool KIII Pro , Magicsee N5 Max and similar)




*****************************************************************************

************** Bin files for Android Devices Only **************
*****************************************************************************



Amiko A3 (4.4_KitKat)



Amiko A4 (5.1_Lollipop)



Amiko A5 (7.0_Nougat)



WeTekPlay2 WeOS-v2 (5.0-Lollipop)



WeTekPlay2 WeOS-v3 (6.0-Marshmallow)




----- Android stapi -----



4.4-KitKat-Androideabi19-stapi



5.1-Lollipop-stapi



7.0-Nougat-stapi



5.0-Lollipop-stapi



6.0-Marshmallow-stapi



Icone-Iron-stapi




****************************************************************

************** Ncam with libusb-pcsc **************
****************************************************************



cortexa9hf-vfp-neon-ARM-libusb-pcsc (DreamoxUHD + VU+4K + Routers Mipsel DD-WRT + RaspberryPI Hardware FPU)



*******************************************************************

************** Ncam For Windows **************
*******************************************************************



Windows 64Bit

Windows 32Bit
 

Attachments

  • Ncam-Images-IPK.zip
    5 MB · Views: 54
  • NCam-Images-OSDreambox-DEB.zip
    3.1 MB · Views: 41
Last edited:
Top