how to update qviart lunix co?

kegnkiwi

kegnkiwi

Staff member
Moderator
Messages
1,531
I don't have the box but a quick Google search says download the image you want. It may come zipped so un zipp the file and there should be a folder called update. Transfer the folder to a usb stick. Turn receiver off at the back with power switch. Stick the usb stick in the front slot and then turn the receiver back on. You should then see a update screen appear on the TV when you see this press the red power button on the remote. A new screen saying updating should appear. It should flash a new image a reboot. That should be it.
 
Ferret

Ferret

Marching On Together !
Staff member
Administrator
Messages
18,188
Via USB

Download image of your choice

1. With the receiver turned on we must insert this USB device (with the "UPDATE" folder in its root) in some of the decoder's slots.



2. Once inserted the USB we must go to the Menu / Standby-restart and select the option to restart.



3. Once we see that the receiver is going to restart we will appear a screen where it tells us that a new firm has been found and that we must keep pressing the Power button (Red) on the remote control so that the receiver can read the USB and that way to install the image.



4. While the image is being installed, a screen will appear indicating that the image is being installed and we should wait for it to finish.



5. Once the image is installed, the receiver will restart, and the start configuration menu will appear, to configure our decoder, these are the steps to follow for the configuration:
 
L

lonoe

Member
Messages
51
in theory it should be like this in practice it always restarts the same image, without giving me the option to update, I have to try another USB stick
 
L

lonoe

Member
Messages
51
as an image only does openpli 7.1 work? 7.3 doesn't work, the image remains frozen without the boot
 
L

lonoe

Member
Messages
51
however, to flash this decoder, LUNIX CO with normal lunix firmware, just rename the folder after upgrade to lunixco, which is why I couldn't do it
 
EnoSat

EnoSat

Well Known Member
Messages
2,352
Ferret said:
They havnt todays image here

DOWNLOAD
Click to expand...
Lunix is not Lunix CO ❗
lunix.png

lunixco.png

lonoe said:
how to update firm decoder qviart lunix co? no 4k thanks
Click to expand...
MENU - Setting - Load software
 
Last edited:
L

lonoe

Member
Messages
51
All good with OpenATV, I asked for updated drivers to Qviart support, to redo OpenPLI firmware, but they didn't answer me
 
N

naeem

Registered
Messages
2
Hello Friends, i am Having Qviart Lunixco, it was running Open Pli firmware from 2017, i updated with the latest version openpli-9.0-release-lunix-20241027_usb, the Installation was smooth & successful but after the reboot now the stb is hanged on Qviart Linux Boot Logo, tried 2-3 times power on-off

it just flashes twice on the Boot Logo and don't go further, No Pli Home Menu.

Further searching on the pli forum came to know that they don't have the original driver from the manufacturer, so the new images after 7.1 is not compatible, where as Open ATV IMAGE

works.

Now my problem is that since its hanged on boot logo, No Image is Detected via USB, be it Open ATV, PureE2 , Openspa, Nothing flashes on the Screen saying New Update Found,

The Only thing is that I can Communicate with the stb Via WINSCP and Putty, i can see all the folders and transfer files.

I want to know is there any way i can install New Image Open Atv via file transfer, if yes than please tell me how? and in in which folder should i Place the Image Firmware,

and the Syntax Command,

Thanks.

lonoe said:
All good with OpenATV, I asked for updated drivers to Qviart support, to redo OpenPLI firmware, but they didn't answer me
Click to expand...
Did you find the new drivers?, as my Lunixco is hanged on BootLogo
 
You must log in or register to reply here.
Top