Enigma2 Azbox HD v 1.0.21 for Elite/Premium

gorski

Well Known Member
Messages
1,553
Well, even if The_Ripper [and co.] isn't [aren't] paid now - he will have learned quite a bit about porting E2 to a platform in the process... Also, about writing drivers, the interplay of various systems and so on. On top of that, he will have learned how to put a team together, divide the roles and delegate, then close it all up again... That makes one more knowledgeable and more experienced, hence more employable and commanding higher rewards, if the porting is successful...

However, as Grizzly said, we shall probably have to wait for that a little longer, as the resolution will only be 720, i.e. the picture won't be as good as the original FW, the drivers not as good as they can be, bugs galore would be found everywhere... It's reasonable to assume it. Because these things are complex and they take time! It's just realistic to assume that. [Now, if they manage to go over that - great. If not, we are not going to be too disappointed... ;)]

On top of that, they may be working without any support from either OpenShite or Celrun, never mind the contemptible Sigma guys...

So, whatever they come up with it will be a feat! Of great interest to us, the hobbyists!!! :) Giving us something to do... More options... Others who write, this would have given more things to do for AZbug HD... :cool:

But there will always be a risk of never quite getting there, in other words, not doing it as well as the original FW/drivers/mediaplayer/whatever else is in there... Well, I, for one, am glad they are ready to take that risk!!! The_Ripper is more of a child than most developers, it seems, as he seems more playful, ready to stretch himself, test his capacities and that is a quality I admire!!!:thum: That is how you get places: by stretching yourself, not by playing it safe! You don't get very far by playing only as much as you are already sure you can pull off, that's for sure!

Good luck on your journey! Can't wait to read about a decent product to test...:clapping:
 

Doctor Who

Member
Messages
81
@all user stop testing on Premium+

The_Ripper said:
On premium+ E2 crash on frontend/NIM reading because receiver use STV0903/STV6110 not cx24116,so full E2 boot process failed.
All users must wait for this driver ...
 

Doctor Who

Member
Messages
81
MickeySa said:
Dear friends,

Here is the working version of em8634dvb.ko file.

I tested with all FTA channels on Astra 19.2 e , You can ask with any other satellite with FTA channels. Enjoy :)

This driver is for Elite/Premium.

Premium+ driver will be published soon ( stay tuned, next days )

Replace old em8634dvb.ko file located in :

/lib/modules/2.6.22.19-19-the_ripper/extra

with new one which i attached to this post.

Please post Your opinnion and so on.

Known BUG is that on the first channel ( FTA channel ) when receiver is turned on that there is just audio, so just zapp to another FTA channel and there will be no more problem :).

This is experimental, but works enough well that You can watch FTA channels :)

Also i put Don@ channel list , and used simple configuration with one satellite :)

We wish you happy testing.

DOWNLOAD em8634dvb.ko

Code:
http://www.megaupload.com/?d=7F3M53YY
 

bluedawe

Registered
Messages
1
Hi!

I just tried this driver, but can't find any programs....

I can see signal strength in satfinder, but no signal quality.

I'm using AZbox Elite HD with E2 1.0.21 and em8634dvb.ko from post above.....

Maybe it would be great to notice, that I do use A/B DiSEqC switch
 
Last edited:

gorski

Well Known Member
Messages
1,553
That part [DiSEqC switches] is broken in this E2. Not so in other E2s. Dunno why...

I wrote to an E2 coder but...

Waiting....
 

gorski

Well Known Member
Messages
1,553
[ame="http://www.youtube.com/watch?v=NBb0TVZgiAg&feature=player_embedded"]YouTube - Azbox Enigma2 Test Version Zap Speed[/ame]
 

Boryans

Registered
Messages
4
This image was created on Sept. 2, 2010. Has already passed more than a month. Maybe there is something newer.
 

gorski

Well Known Member
Messages
1,553
No, he's right, the "image" is old[er]... ;) But the newer variants are being tested in closed quarters... :D
 

gorski

Well Known Member
Messages
1,553
Actually, The_Ripper asked for some help: anyone who can programme, to check the DiSEqC/cx24116 tuner driver - the switches are not working [protocols 1.0 and 1.1]... The driver is free, so the guys in the know, please step forward... :)

Here is a quote from The_Ripper:

@kanber_kev
Soon new driver,

you said, you are programmer, check cx24116.c code in linux kernel source and try to fix DISEQC, Sigma doesnt control that nor my driver.
 

marcomendes

Registered
Messages
1
Enigma2 instalation problems "100≠"

Hello,

Did anyone faced problems when installing E2? I got stuck in "100≠".Nothing happens after this. I tried to reinstall the original firmware but when I switch on the Azbox with USB memory stick with the patch.bin shows booting and after that jumps to a message "starting/etc/rcs. and in the end "100≠". Someone told me to press menu, but nothing happens. TV shows just a black screen. I need help here. Is it possible that is a hardware failure? Is it possible to to recover the AZbox premium +?
 
Top