DREAMBOX800 FLASH PROBLEMS

dhanda

Registered
Messages
50
I have dm800hd pvr clone but this box do not work now becoz it look like dead box, befor deading,i was flashing with web broswer, web shows its flashing 100% but box not reboot box, when i connect power again to box, it shows only '' dreammultimeadia'' and back side box 2[green & yellow] lights in ethernet port are on every time, after this i try flash box with dreamup but dreamup log box shows ''box type dm800'' after this nothing happen, i also try enforcer dreamup , but no nothing, null cable & my commnication is ok .. so please any helper, help me to flsah my dm 800 with more expertion ........
 

Brummie

Staff member
Administrator
Messages
5,794
you need to get it into serial mode, with the null modem cable and lan cable both connected.

select your com port and tick the enable network box, then press on connect, at this time insert the power lead at the back, look at the led on the front and it should say serial mode and show an ip, put that ip into your browser and flash it through that then like the normal way you flash it, if it does not go into serial mode exit dreamup and start again.

never insert the power lead until it says now switch on power, then you insert the lead at the back.
 

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,541
dear nothing happen as u advise me, dm display shows dreammultimeadia

What sim version do you have. Are you using the correct images for it?

There is a chance this is hardware related take the lid and the back panel off pull the tuner from it slot while your there re-seat the sim be careful as the sim holder is fragile.

Now reflash the box and reboot if it boots without the tuner then you tuner could be faulty.
 

dhanda

Registered
Messages
50
dear ferret, i donot know what is my sim verison,i try to wants flash by dreamup without tuner as u tell me but no flash,box disply shows only 'dreammulimeadia'so how to flsah box? plz help me or any others flash methods ?
 

varjomies

Registered
Messages
4
colone dm800 searchıng rıght flash plz help

colone dm800
boot76,gemi5.0,sim2.01,tunner alps l3



flashed wrong image now it,s calling no ca found.

i need to right flash for it. soory i,m new

thanks
 
Last edited by a moderator:

varjomies

Registered
Messages
4
Thanks burimmie. flashed Merlin-2-Excalibur-OE-1-6-dm800-2-20-ramiMAHER
i liked but boot loading image did not like.
missing subtitle . how can i add ? here is finland movies have
subtitle.
second question when i click ok buttom . it was coming menu list . it does not come anymore in the channel list top of left to side it was showing channel same like glass skin. searching that skin name ?
can you help ?
 

dhanda

Registered
Messages
50
dear ferret, i have try these image as advise me u , but no luck.only box diplay shows 'dreammultimidea' and back side of box enthernet port [green & yellow]lights are on continue shining..
 

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,541
OK mate take the top and rear panel off and remover the tuner it sits in a slot.

With the tuner removed reflash and reboot if the box boots your tuner is faulty.

Ferret
 

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,541
Hmmm did you remove and reseat the sim ?
 
Top