dm920 - Python3 - openPLi (homebuild)

mouadhada

Active member
Messages
127
Can you provide please a version of supcam working in your build.
i tried 2 but failure in installation !
 

satpong

Member
Messages
79
Can you provide please a version of supcam working in your build.
i tried 2 but failure in installation !
libcurl4 installed ?
opkg update && opkg install libcurl4

I haven't tested it:
Have you tried / supcam-ncam / supcam-oscam / ipk ?
thanks @ MOHAMED19OS
 
Last edited:

mouadhada

Active member
Messages
127
Yes, but I didn’t suces to install the supcam plug-in.
this one can be installed but the window disappears in 1 second :
 

mouadhada

Active member
Messages
127
Any update within TVE UHD in abertis package ?
 

Lexzie

Member
Messages
96
I can't set a username+password for the mounts, results in a crash.

USB is mounted, still Autobackup (to USB) fails.
Auto Backup recognises the last backup on the USB stick, but when I manually want to make a backup it fails.
Also to every other media by the way.
 

satpong

Member
Messages
79
Any update within TVE UHD in abertis package ?
Has been added to next image build (tomorrow or Saturday), but not tested.
 

satpong

Member
Messages
79
I can't set a username+password for the mounts, results in a crash.

USB is mounted, still Autobackup (to USB) fails.
Auto Backup recognises the last backup on the USB stick, but when I manually want to make a backup it fails.
Also to every other media by the way.
Heb je een crashlog ?
Gaat dit over netwerk mounts ? CIFS, NFS, Is Samba geen optie ?
Hoe kan ik het testen ? Want ik krijg geen crash bij het instellen van nfs/cifs share gebruikersnaam en wachtwoord.
Heb je getest met het laatste image van 12-11-2022 ? (openpli-py3.11-dm920-20221112)

Do you have a crash log?
Is this about network mounts? CIFS, NFS, Is Samba not an option?
How can I test it ? Because I don't get a crash when setting nfs/cifs share username and password.
Have you tested with the latest image from 12-11-2022 (openpli-py3.11-dm920-20221112)
 

mouadhada

Active member
Messages
127
Has been added to next image build (tomorrow or Saturday), but not tested.
Update online can make it working ?
 

satpong

Member
Messages
79
No, it's not on my feed (but can be added to an installable package)
not image related
needs to update E2 settings, astra.conf
 

satpong

Member
Messages
79
23-11.gif

USB is mounted, still Autobackup (to USB) fails.
Auto Backup recognises the last backup on the USB stick, but when I manually want to make a backup it fails.
Also to every other media by the way.
Auto Backup tested on usb media/hdd + media/sda1
Backup and restore folders and files
All succeeded (openpli-py3.11-dm920-20221112)
 

satpong

Member
Messages
79
dm920 - Python 3.11 - openPLi-develop (homebuild)
openpli-py3.11-dm920-20221123

- Python 3.11.0
- GCC 12.2.0
- Glibc 2.36
- OpenSSL 3.0.7
- Busybox 1.35.0
- GStreamer 1.20.4
- FFmpeg 5.1.2
- ServiceApp
- Streamlink 5.1.1
- YouTube git1031
- OpenWebif 1.5.2
- WLAN, CI+, Display skins, LED setup
- blindscan, cablescan, terrestrialscan, fastscan
- feed dm920/drivers/settings/plugins
- CCcam 2.3.2a, Ncam-icam-v8, OScam-icam-v8, OScam-emu 11715, OScam 11715
- E2 settings 75°E-45°W, Streams

update 23-11-2022
- [RecordTimer] fix record iptv if use ServiceApp
- [MovieSelection] fix delete record.stream
- [ServiceList] split search channel for tv and radio
- E2 settings Motor 75°E-45°W
- Abertis PID 802 (TVE 4K, UHD Spain)
- Streamlink 5.1.1

download
 
Last edited:

Lexzie

Member
Messages
96
Heb je een crashlog ?
Gaat dit over netwerk mounts ? CIFS, NFS, Is Samba geen optie ?
Hoe kan ik het testen ? Want ik krijg geen crash bij het instellen van nfs/cifs share gebruikersnaam en wachtwoord.
Heb je getest met het laatste image van 12-11-2022 ? (openpli-py3.11-dm920-20221112)

Do you have a crash log?
Is this about network mounts? CIFS, NFS, Is Samba not an option?
How can I test it ? Because I don't get a crash when setting nfs/cifs share username and password.
Have you tested with the latest image from 12-11-2022 (openpli-py3.11-dm920-20221112)
Ik heb openPLi-py3-dm920-20221102 geflasht.
De Auto Backup doe ik op precies dezelfde manier.

Mounten op twee verschillende manieren, beide in Menu>Setup>Expert settings>Network>NetworkBrowser
daar kies ik mijn NAS:
Dan wordt er gevraagd om gebruikersnaam en wachtwoord in te stellen, die vul ik in en na OK crasht de box.
Dit deed-ie ook met een oudere versie van het image.

Of je antwoord nee op de vraag om een gebruikersnaam en wachtwoord in te stellen en dan komt de optie User Management erbij in Menu>Setup>Expert settings>Network>MountManager
Maar ook daar crasht de box.

Ik wil wel screenshots toevoegen en de crashlogs, maar ik zie geen optie om dat hier te doen.


Het flashen van openpli-py3.11-dm920-20221123 lukt niet, ik krijg dan deze melding:

[*] Remounting '/dev/mmcblk0p3' to '/data'
[*] Remounting '/dev/mmcblk0p2' to '/mnt'
/mnt/etc/recovery/backup-hooks.d/fstab.sh: line 4: can't create /mnt/etc/enigma2/fstab.bak: Read-only file system
 
Last edited:

satpong

Member
Messages
79
flash.gif

Het flashen van openpli-py3.11-dm920-20221123 lukt niet, ik krijg dan deze melding:
Ik heb zonet het openimage geflashed en dat ging probleemloos. Er loopt blijkbaar iets niet goed op jouw box.
Misschien de zImage-rescue loader eens updaten of eerst originele dreamos firmware flashen waar het al in zit.
Nadien pas het openimage.

Just flashed the openimage and it worked fine me, normally I never install openimages in flash memory, I use Barry Allen for that.
Try to update zImage-rescue loader or flash original dreamos firmware first → then openimage
 
Last edited:

satpong

Member
Messages
79
@all who installed this image
If E2 restarts slow, please reinstall dreambox-dvb-modules from feed,
copy and paste this telnet command :
opkg update && opkg install dreambox-dvb-modules-dm920 --force-reinstall && opkg install dreambox-dvb-modules-dm920-lcd --force-reinstall && opkg install dreambox-dvb-modules-dm920-stb-core --force-reinstall
 

Lexzie

Member
Messages
96
flash.gif


Ik heb zonet het openimage geflashed en dat ging probleemloos. Er loopt blijkbaar iets niet goed op jouw box.
Misschien de zImage-rescue loader eens updaten of eerst originele dreamos firmware flashen waar het al in zit.
Nadien pas het openimage.

Just flashed the openimage and it worked fine me, normally I never install openimages in flash memory, I use Barry Allen for that.
Try to update zImage-rescue loader or flash original dreamos firmware first → then openimage
Er klopt sowieso iets niet, ik had op dat scherm Firware Update gedaan, geen vinkjes aangezet van backup en restore settings en ook op de vraag om de instellingen (die van 30 oktober dus!) terug te setten Nee geantwoord.
Maar toch hoef ik bijvoorbeeld het wachtwoord van root niet opnieuw in te stellen.
Ik zal dat wel doen al heb ik er een bloedhekel aan als ik geen backup van de instellingen terug kan zetten, iedereen roept altijd maar dat het zo gepiept is, ik ben dagen later nog alles aan het instellen zoals ik het wil.

Something is wrong, I thought I installed a clean flash, but f.e. the root password is saved.

Hoe doe ik dat hier plaatjes in een bericht ?
How to add pictures in a post here?
I thing I know how you do that. You post a picture on Gifyu and link to that here.
So after a year the picture is gone.
 
Last edited:

RNESTOe

Registered
Messages
3
hi, image installed ok, for view sky de with oscam icam? my c line is in cccam.cfg and work in cccam
 
Last edited:

satpong

Member
Messages
79
hi, image installed ok, for view sky de with oscam icam? my c line is in cccam.cfg and work in cccam
Hi thanks for the feedback.
I don't have satellite channels and can't answer that with 100% certainty. It should work via streamrelay and a good c-line that you convert to an oscam or ncam reader. (see example in the configs)
Softcams "oscam-icam" and "ncam-icam" + "configs" are already included in the image, as well as a streamrelay "sky.de icam bouquet". I'd say try.
Don't forget to turn on the created oscam/ncam.server [reader] enable = 1
Maybe someone who has tested this image can confirm whether it works or not.
 

Lexzie

Member
Messages
96
Hi thanks for the feedback.
I don't have satellite channels and can't answer that with 100% certainty. It should work via streamrelay and a good c-line that you convert to an oscam or ncam reader. (see example in the configs)
Softcams "oscam-icam" and "ncam-icam" + "configs" are already included in the image, as well as a streamrelay "sky.de icam bouquet". I'd say try.
Don't forget to turn on the created oscam/ncam.server [reader] enable = 1
Maybe someone who has tested this image can confirm whether it works or not.
I can test satellite, if I get it working again.

I am now flashing the original dreamos firmware, could this be a good time to install multiboot?
I don't know where I saw a howto to do that.
 

Lexzie

Member
Messages
96
One thing I noticed: I have DM920 Rescue Loader #103, even after I had flashed with the latest original DreamOS firmware.
And I saw you have #104. How do I update this zImage-rescue loader of which you talked?

Because I still can't flash your latest image.

By the way: They should name that "original DreamOS firmware" DramaOS. I could not even do or install the cable scan.
I could not scan a satellite and lots and lots of options missing...
 
Last edited:

Lexzie

Member
Messages
96
Okay, so I first flashed with the original DreamOS image,
There I activated the rescue mode again,
And then I installed the latest openpli-py3.11-dm920-20221123 image.

20221124-about.png



Still the image crashes when I want to setup a username and password for the mounts (NFS mount).

After browsing the network, finding the NAS and choosing that IP-adres:

20221124-username-and-passw.png


I choose yes and type in the username and password that is setup in my NAS (and worked before):

20221124-username-and-password.png


After pressing OK I get a green screen.

20221124-GSOD.png


Here's the Crashlog
 
Top