libcurl4 installed ?Can you provide please a version of supcam working in your build.
i tried 2 but failure in installation !
Has been added to next image build (tomorrow or Saturday), but not tested.Any update within TVE UHD in abertis package ?
Heb je een crashlog ?I can't set a username+password for the mounts, results in a crash.
USB is mounted, still Autobackup (to USB) fails.
Auto Backup recognises the last backup on the USB stick, but when I manually want to make a backup it fails.
Also to every other media by the way.
Update online can make it working ?Has been added to next image build (tomorrow or Saturday), but not tested.
Auto Backup tested on usb media/hdd + media/sda1USB is mounted, still Autobackup (to USB) fails.
Auto Backup recognises the last backup on the USB stick, but when I manually want to make a backup it fails.
Also to every other media by the way.
Ik heb openPLi-py3-dm920-20221102 geflasht.Heb je een crashlog ?
Gaat dit over netwerk mounts ? CIFS, NFS, Is Samba geen optie ?
Hoe kan ik het testen ? Want ik krijg geen crash bij het instellen van nfs/cifs share gebruikersnaam en wachtwoord.
Heb je getest met het laatste image van 12-11-2022 ? (openpli-py3.11-dm920-20221112)
Do you have a crash log?
Is this about network mounts? CIFS, NFS, Is Samba not an option?
How can I test it ? Because I don't get a crash when setting nfs/cifs share username and password.
Have you tested with the latest image from 12-11-2022 (openpli-py3.11-dm920-20221112)
[*] Remounting '/dev/mmcblk0p3' to '/data'
[*] Remounting '/dev/mmcblk0p2' to '/mnt'
/mnt/etc/recovery/backup-hooks.d/fstab.sh: line 4: can't create /mnt/etc/enigma2/fstab.bak: Read-only file system
Ik heb zonet het openimage geflashed en dat ging probleemloos. Er loopt blijkbaar iets niet goed op jouw box.Het flashen van openpli-py3.11-dm920-20221123 lukt niet, ik krijg dan deze melding:
Er klopt sowieso iets niet, ik had op dat scherm Firware Update gedaan, geen vinkjes aangezet van backup en restore settings en ook op de vraag om de instellingen (die van 30 oktober dus!) terug te setten Nee geantwoord.
Ik heb zonet het openimage geflashed en dat ging probleemloos. Er loopt blijkbaar iets niet goed op jouw box.
Misschien de zImage-rescue loader eens updaten of eerst originele dreamos firmware flashen waar het al in zit.
Nadien pas het openimage.
Just flashed the openimage and it worked fine me, normally I never install openimages in flash memory, I use Barry Allen for that.
Try to update zImage-rescue loader or flash original dreamos firmware first → then openimage
Hi thanks for the feedback.hi, image installed ok, for view sky de with oscam icam? my c line is in cccam.cfg and work in cccam
I can test satellite, if I get it working again.Hi thanks for the feedback.
I don't have satellite channels and can't answer that with 100% certainty. It should work via streamrelay and a good c-line that you convert to an oscam or ncam reader. (see example in the configs)
Softcams "oscam-icam" and "ncam-icam" + "configs" are already included in the image, as well as a streamrelay "sky.de icam bouquet". I'd say try.
Don't forget to turn on the created oscam/ncam.server [reader] enable = 1
Maybe someone who has tested this image can confirm whether it works or not.