DM8000: problem with DiSeq 1.1 protocol

[kare77]

Hello DB8000 fans! I doubt that Dreambox 8000HD PVR does not support DiSeq 1.1 protocol. Because:
1. after installing Torroidal T90 antenna with 10 LNBs my Dreambox 8000HD PVR stopped working. Simply, the box is not able to find channels in auto scanning. It finds channels only from concrete transponders. But finds only momentarily as
2. playing back the finded channels the box tells "No channels found"!
Two times the local DB representative has replaced the mother board - no vain yet! (DiSeq SW101D).
Any idea? Is that my doubt true?

 

[Ferret]

Im wondering id your problem is the Diseqc switch itself as the 8000 can be picky with switches.

Have a look at this guide to make sure you set it up correctly

http://www.sat-universe.com/showthread.php?t=181704

 

[kare77]

DiSeq switch itself is OK as it works super with CubeRevo 7000HD receiver, no probelm at all! All settings I did exactly by the referred instruction. Any more ideas?

 

[bestven]

Hello DB8000 fans! I doubt that Dreambox 8000HD PVR does not support DiSeq 1.1 protocol. Because:
1. after installing Torroidal T90 antenna with 10 LNBs my Dreambox 8000HD PVR stopped working. Simply, the box is not able to find channels in auto scanning. It finds channels only from concrete transponders. But finds only momentarily as
2. playing back the finded channels the box tells "No channels found"!
Two times the local DB representative has replaced the mother board - no vain yet! (DiSeq SW101D).
Any idea? Is that my doubt true?

DM 8000 pvr support DiSeq 1.1. I have torroidal T110 with 15 LNB and the receiver work very well.
I think you shall kontroll your configuration and the DiSeq itself
P.S. I think you shall use setings for channel list from dreambox edit because auto scanninig take a lot of time and is very easy for you to make the configuration

 

[Ferret]

DiSeq switch itself is OK as it works super with CubeRevo 7000HD receiver, no problem at all! All settings I did exactly by the referred instruction. Any more ideas?

That is no guarantee it will work with the 8000 the DMM receivers are notorious for been problematic with switches.

 

[kare77]

Yes, I agree. Seems that there is a conflict between the SW101D DiSeq and the Dream. Which brand of the switch is the best? Bestven, what is your DiSeq?

 

[bestven]

Yes, I agree. Seems that there is a conflict between the SW101D DiSeq and the Dream. Which brand of the switch is the best? Bestven, what is your DiSeq?

I use EMP-centauri 16x1

 

[kare77]

Actually all other satellites are now OK, except on the 36E with circular polarisation (Russian channels). Particularly, the signal of DVB-S2 transponders vibrates between 0 and maximum. Like the DiSeq is unable to keep the LNB connected.

 

[sosez]

Hi friend, i have some problems with imagen in multiboot, and disq 1.2. Motor doesnt move among satellites.

Anyone has this problem??


regards to everybody

 

[kare77]

DM 8000 pvr support DiSeq 1.1.

You are right! Indeed, DM 8000 PVR supports well DiSeq 1.1. You need to make right setings only in the LNB setup menu.

 

[scafroglia1]

you have a incorrect setting. the dm machine is the best