Diseqc Setting for Dual Monoblock LNB

[roxy2642]

Guys

I have a Dm800 with Dual Mono-block LNB + Universal LNB (w/o Motor)connected with 2 Switch Diseqc.

I could configure in advance setting the Universal LNB which is giving me Sat 91E and i could configure one LNB out of 2 in dual Mono-block which gives me 93E and 95E but unfortunately i am unable to configure or make necessary setting in Advance tuner settings to get channels from 2nd LNB which should search 100.5E in Dual Mono-block LNB.

Means i could only search one LNB out of two in mono-block LNB.

Please help me to make necessary settings in Diseqc settings so that i ca get the both lnb work in dual Mono - block LNB

thanks in advance

 

[Ferret]

Problem you have is the diseqc switch in the monoblock clash with the other switch so you need to use a splitter.


Credits for this guide goes to Joedenoble



How to fit a monoblock with built in diseqc switch on a switch

You can put a monoblock with built in diseqc switch on a switch as long as you obey the "order" of the monoblock switch while 'patching' towards the second switch.
Materials used :

- 2 dish : 1 dish with monoblock(hotbird & astra1), 1 dish with another sat
- Monoblock (1 : hotbird 13e , 2 : astra1 19.2 e) + splitter (1in/2out)
- Diseqc switch 4/1 (1 : hotbird, 2: astra, 3: astra2, 4:Not used)
- 1 cable going from the diseqc switch(1/4) to receiver


On some Linux receivers settings can be like this:


Non-standard user defined configuration
Diseqc 1.0

Hotbird

LNB = 0
Toneburst = A
Diseqc = AA

Astra

LNB = 1
Toneburst = B
Diseqc = AB

Single LNB

LNB = 2
Diseqc = BA

On others it can be normal Diseq

port 1 : Hotbird
port 2 : Astra1
Port 3 : Astra2
Port 4 : Not used

 

[roxy2642]

Thank u so much mate u have been always there for all of us. I am getting new splitter and Diseqc Today and hope to get this sorted.

 

[roxy2642]

Mate can u just specifically give me settings for Dm800 with Rami maher V5 Image. Screen shots would be highly appreciated with any image

 

[Ferret]

Sorry mate

Dont use that image as i dont have a clone 800, the guide is not mine but known to work with the use of a splitter.

Ferret

 

[roxy2642]

dear mate i couldnt understand this portion

Non-standard user defined configuration
Diseqc 1.0

Hotbird

LNB = 0
Toneburst = A
Diseqc = AA

Astra

LNB = 1
Toneburst = B
Diseqc = AB

Single LNB

LNB = 2
Diseqc = BA


as i cant see LNB=0 Option

please advise what to do

 

[roxy2642]

dear mate i am waiting for ur answer plz help

 

[Ferret]

Use LNB1 upwards then mate.

Sorry can not be of anymore help it is posted as a guide not from personal experience.

Ferret

 

[roxy2642]

Guys

I have a Dm800 with Dual Mono-block LNB + connected to two way out splitter+ Universal LNB (w/o Motor)connected with 4 /1 Switch Diseqc.

I could configure in advance setting the Universal LNB which is giving me Sat 91E and i could configure one LNB out of 2 in dual Mono-block which gives me 93E and 95E but unfortunately i am unable to configure or make necessary setting in Advance tuner settings in my dm800 to get channels from 2nd LNB which should search 100.5E in Dual Mono-block LNB.

Means i could only search one LNB out of two in mono-block LNB.

Please help me to make necessary settings in Diseqc settings in my dm800 so that i can get the both lnb work in dual Mono - block LNB

i have done all with splitter and 4/1 diseqc but the only issue i suppose i am unable to configure the tuner and diseqc/tonebrust settings in my dm800

plz help to make the proper settings i would appreciate the screen-shot of the settings

thanks in advance