Change the sim out without Err01: noCA found

[xmen]

if you change your sim with a Ferrari

you have to change the sim upload via browser ssl76ff,
NOT reeboot then the decoder, but unplugged

change the sim
after putting the sim Ferrari starts with the decoder on the button down and uploaded the new image via the browser and after 76ff ssl ....

so it can avoid having found no Err01: noCA found when you change the sim ...

 

[Melgas]

if you change your sim with a Ferrari

you have to change the sim upload via browser ssl76ff,
NOT reeboot then the decoder, but unplugged

change the sim
after putting the sim Ferrari starts with the decoder on the button down and uploaded the new image via the browser and after 76ff ssl ....

so it can avoid having found no Err01: noCA found when you change the sim ...

Friends
I have a DM8000HD.
I transferred the image to the box "Ferrari-SSL83F-Newnigma2-release-DM8000-v3.2.2.nfi"
I turned off the box to reboot it and gave the following error: ERR01 CA NOT FOUND
On my PC I have Windows 7 and I am unable to connect a null modem cable.
So I have only connection to the box by browser or DCC.
How should I proceed. Please wait information and tips.
Thanks and a hug.

 

[Ferret]

Hi mate

You will need to reflash with enforcer and a ethernet & null modem cable connected.

http://www.sat-universe.com/showthread.php?t=141826

Use this method

Start Enforcer and tick the use network option

Make sure your 8000 has no power to it and click connect.

At the prompt turn on the power.

You should now see a IP address displayed in on the screen of the 8000

Put that ip in your browser and flash as normal

 

[Melgas]

Hello FERRET
Thank you for your message.
I'll need a PC with Windows XP and an RS232 port for connecting the cable.
My PC has Windows7 and has no RS232 port. I will resolve.
Hug.