Change SIM 2.10 for SIM a8p on dm800se

[franhv]

Hi, I tried to change SIM 2.10 for SIM a8p on my dm800se clone like this:

"Leave the sim2 in the SE and flash a Original image.

After flashing is complete turn off the power at the plug.

Now take out the sim2 sim and replace it with the A8p sim.

Now power on."

But when I put on my dm800se, there was an error on display "ERROR NO CA FOUND". I used DreamUP and now my dm800se it's ok but it have the SIM 2.10 and one image for clone. I have not run SIM a8p in my dreambox.

Anyone can help me? Thanks.

 

[mo.p]

yes m8 thats how it done only thing i can say are u sure the image flash was a Original image may be u can try anthere Original image

 

[aliraza63]

Hi, I tried to change SIM 2.10 for SIM a8p on my dm800se clone like this:

"Leave the sim2 in the SE and flash a Original image.

After flashing is complete turn off the power at the plug.

Now take out the sim2 sim and replace it with the A8p sim.

Now power on."

But when I put on my dm800se, there was an error on display "ERROR NO CA FOUND". I used DreamUP and now my dm800se it's ok but it have the SIM 2.10 and one image for clone. I have not run SIM a8p in my dreambox.

Anyone can help me? Thanks.

Try Open pli original clean image or Newnnigma 2

 

[franhv]

Try Open pli original clean image or Newnnigma 2

I try with these two images and it doesn't work...

Help me, please.

 

[Ferret]

Do you have a Miniflashup button on the rear ?

If so power off press and hold the minflashup button in till you see flashup screen on the front.

Use that IP in browser to flash a original image.

 

[franhv]

Do you have a Miniflashup button on the rear ?

If so power off press and hold the minflashup button in till you see flashup screen on the front.

Use that IP in browser to flash a original image.

With SIM 2.10 inside or SIM a8p?

Thanks Ferret.

 

[Ferret]

With A8P first make sure it is a original image.

 

[franhv]

With A8P first make sure it is a original image.

With A8P, if I keep miniflash button, no IP appears on the LCD screen. With 2.10, appears.

 

[Ferret]

OK then flash a sim2 image let it boot.

Now flash again with sim2 sim in but with original image.

After flashing pull power install a8p sim and reboot.

 

[franhv]

OK then flash a sim2 image let it boot.

Now flash again with sim2 sim in but with original image.

After flashing pull power install a8p sim and reboot.

This, with Sim 2.10 when it appears the IP in display?

 

[Ferret]

Yes with sim2 sim in

 

[franhv]

OK then flash a sim2 image let it boot.

Now flash again with sim2 sim in but with original image.

After flashing pull power install a8p sim and reboot.

I tried to do this, and the same problem: ERROR NO CA FOUND. Sim a8p don't work on my dm800se...

 

[Ferret]

Try this guide then try it on both sims

http://www.sat-universe.com/showthread.php?t=211783


If not try the optiflasher tool.