Best LNB unicable for motorized dish
- Thread starter arkanoid9
- Start date
- Messages
- 17,517
To get the best out the FBC tuner id buy a Unicable LNB.
Inverto are well regarded as usual.
butchyboy
Registered
- Messages
- 302
i,ve been using a single inverto black ultra lnb for the past nearly 4 yrs on my 1.8m dish and i receive everything and all feeds etc
i have plenty of boxed new lnb,s like the single and twin black inverto ultra and a few others,the will be used at some stage when the one im using now goes bad from sun etc
i have plenty of boxed new lnb,s like the single and twin black inverto ultra and a few others,the will be used at some stage when the one im using now goes bad from sun etc
arkanoid9
Donating Member
- Messages
- 74
Could you tell me any inverto model?
butchyboy
Registered
- Messages
- 302
Inverto Unicable II Programmable LNB with 32UB
cokeaddict
Member
- Messages
- 368
- Messages
- 17,517
If you supply me the following ill try.If its an image, ive not setup for Unicable i wont be able to help.
Image your using and it must be on the default skin.
First 8 SCR or your LNB
Usual coordinates.
arkanoid9
Donating Member
- Messages
- 74
I 'm just sent a PM with all information!
3satbox
Registered
- Messages
- 252
Bought an Inverto IDLP-40UNIQD+S Unicable and tried it on my motor dish, but when I realized that the ms at 5w from france come in pixels, changed it back to universal.
@Ferret and @cokeaddict and @butchyboy et al,
Do you know if Inverto sell a Unicable II lnb with at least one universal legacy port on it as well as the unicable port?
I can find Unicable 1 versions but can't seem to find Unicable II.
At the moment the one I am finding is called a GT-Sat Unicable II and I don't know how that compares with the Inverto.
Thanks.
I use theunicable lnb below with motorized dish. It's work pretty well.
Unicable Quad IDLP-QUDL42-UNI2L-1PP
Unicable Quad IDLP-QUDL42-UNI2L-1PP
cokeaddict
Member
- Messages
- 368
Not that I have seen, only Unicable I.
If you want Unicable II with 3 Legacy, then I use the Dur-line UK 124-3L, which has 24 Unicable II and 3 Legacy.
It out performs my old Inverto IDLU-32UL40-UNBOO-OPP
Thanks. The reason I want at least one legacy port is that I have a receiver that won't cope with Unicable, and
I need the benefit of being able to feed all my Enigma2 receivers and Viarks from the Unicable port via an 8+
way splitter.
The Unicable II seems to me to an elegant and cost effective solution to get multiple connections to my
receivers rather than having to buy an expensive dSCR multiswitch.
Does my thinking make sense?
cokeaddict
Member
- Messages
- 368
It's the reason I am using Unicable II, I have 35+ E2 boxes + Viark, Gtmedia, Qviart Dual and Icone Wegoo.
The Dual when I first got it did not like Unicable II at all (it is much better with it now) and due to the configuration I had, it was hard work to get a feed to all boxes for both Unicable and Universal lnb from my motorised dish as the viark / gtmedia don't like unicable + diseqc switches. I ended up having to use a manual A/B switch, which wasn't ideal, but did the job as a work around.
So I swapped out the Inverto Unicable II lnb for the Dur-line to make use of the Legacy ports, now I can configure everything to work 100% without needing to use the manual A/B switch anymore (although currently it is still connected).
- Messages
- 891
@cokeaddict any you wanted more boxes. You have a compulsion my friend. 