A Brief Flashing Guide

[Ferret]

A brief flash guide

Start
the Flash tool VU + Util Start

Select your COM Port

Deselect DHCP if you have not setup IP VU + duo

Then click on Connect button

Now you should see Serial port open Please turn on your box.

Do this with on power switch For Ethernet Flash Tick DHCP is set next Click on Set IP button and enter your IP

Now youll see "IP Setup Success" in the VU + Util

Click open and select your NFI image file.

Press the flash Button

VU + Util then says "Reading file, please wait a moment ..."

Wait till you see flashing process is completed

Now the update is finished and you can disconnect and then finish with a Click on the Exit button VU + Util.

Now power off then on.

Translated roughly from German by me

Credits to original author :thum:

Ferret