What is wrong in my config please?

[jpdc1991]

Hello,
If i try too configure like this:
Smartreader= 6.00 mhz,fixed in normal mode
In the oscam config:

mhz = 370
cardmhz = 370

The sky-card ( 0.93 ) do not initialize..
" card system not supported "
Here is my log:

2010/02/21 15:32:02   2957 s   version=0.99.4-SB-svn, build #1609, system=i686-pc-linux, nice=-19
2010/02/21 15:32:02   2957 s   max. clients=509, client max. idle=120 sec
2010/02/21 15:32:02   2957 s   max. logsize=unlimited
2010/02/21 15:32:02   2957 s   client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2010/02/21 15:32:02   2957 s   shared memory initialized (size=4191008, id=425996)
2010/02/21 15:32:02   2957 s   auth size=4752
2010/02/21 15:32:02   2957 s   services reloaded: 0 services freed, 3 services loaded
2010/02/21 15:32:02   2957 s   userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2010/02/21 15:32:02   2957 s   signal handling initialized (type=sysv)
2010/02/21 15:32:02   2957 s   oscam.srvid loading failed, old format
2010/02/21 15:32:02   2958 s   monitor: initialized (fd=6, port=988)
2010/02/21 15:32:02   2958 s   camd 3.3x: disabled
2010/02/21 15:32:02   2958 s   camd 3.5x: disabled
2010/02/21 15:32:02   2958 s   cs378x: disabled
2010/02/21 15:32:02   2958 s   newcamd: initialized (fd=7, port=38000, crypted)
2010/02/21 15:32:02   2958 s   CAID: 093B
2010/02/21 15:32:02   2958 s   provid #0: 000000
2010/02/21 15:32:02   2958 s   cccam: disabled
2010/02/21 15:32:02   2958 s   radegast: disabled
2010/02/21 15:32:02   2958 s   resolver thread started
2010/02/21 15:32:02   2958 s   logger started (pid=2960)
2010/02/21 15:32:02   2958 s   resolver started (pid=2961, delay=30 sec)
2010/02/21 15:32:02   2958 s   http started (pid=2962)
2010/02/21 15:32:02   2958 s   reader started (pid=2963, device=/dev/ttyUSB0, detect=cd, mhz=370, cardmhz=357)
2010/02/21 15:32:02   2958 s   waiting for local card init
2010/02/21 15:32:02   2962 h   HTTP Server listening on port 0
2010/02/21 15:32:04   2963 r03 card detected
2010/02/21 15:32:09   2963 r03 ATR: 3F FD 13 25 02 50 80 0F 33 B0 13 69 FF 4A 60 D0 80 00 49 24 03
2010/02/21 15:32:10   2963 r03 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.70 Mhz
2010/02/21 15:32:11   2963 r03 [videoguard2-reader] type: VideoGuard Sky Italia new (093B)
2010/02/21 15:32:12   2963 r03 card system not supported
2010/02/21 15:32:12   2963 r03 Normal mode failed, reverting to Deprecated Mode
2010/02/21 15:32:17   2963 r03 ATR: 3F FD 13 25 02 50 80 0F 33 B0 13 69 FF 4A 50 D0 80 00 49 54 03 
2010/02/21 15:32:18   2963 r03 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.70 Mhz
2010/02/21 15:32:19   2963 r03 [videoguard2-reader] type: VideoGuard Sky Italia new (093B)
2010/02/21 15:32:22   2963 r03 card system not supported
2010/02/21 15:32:22   2963 r03 card initializing error
2010/02/21 15:32:22   2958 s   init for all local cards done
2010/02/21 15:32:22   2958 s   anti cascading disabled
2010/02/21 15:33:01   2958 s   client(1) connect from 127.0.0.1 (pid=3011, pipfd=13)
2010/02/21 15:33:01   3011 c01 encrypted newcamd:38000-client 127.0.0.1 granted (user, au=skyitalia)
2010/02/21 15:33:01   3011 c01 user user authenticated successfully (using client 4343)
2010/02/21 15:33:01   3011 c01 AU wont be used on this port -> disable AU
2010/02/21 15:33:10   3011 c01 user (093B&000000/2DC7/8F:5C43): not found (2 ms)
2010/02/21 15:33:20   3011 c01 usert (093B&000000/2DC7/8F:86A6): not found (1 ms)
2010/02/21 15:33:30   3011 c01 user (093B&000000/2DC7/8F:5E5B): not found (0 ms)

What is wrong in my config please?

 

[rtznfrtz]

I had similar probs. finding the error-message does not indicate the cause.

I ended up with a working config by only adjusting the Mhz values (i have a Smargo). The only working config in my system is:

mhz = 357
cardmhz = 368

 

[jpdc1991]

I had similar probs. finding the error-message does not indicate the cause.

I ended up with a working config by only adjusting the Mhz values (i have a Smargo). The only working config in my system is:

mhz = 357
cardmhz = 368

cardmhz = 368...
Is that the smartreader ( fixed )speed?

 

[rtznfrtz]

No, Smargo is in "Auto"

 

[jpdc1991]

The two lines:
mhz = 357
cardmhz = 368
is in the oscam.server file than?

 

[xxxAxxx]

your server.conf is worng.....

card system not supported
2010/02/21 15:32:22 2963 r03 card initializing error
2010/02/21 15:32:22 2958 s init for all local cards done
2010/02/21 15:32:22 2958 s anti cascading disabled


this is your log....so the card not init properly ......maybe wrong boxid or reader id.....

what is your server.config.....???????if you want to post here just remove the boxid.....

 

[jpdc1991]

i have this in my config :

[reader]
Label = SkyItalia
Protocol = mouse
Detect = cd
Device = /dev/ttyUSB0
mhz = 357
EMMCache = 1,1,2
Group = 1
CAID = 093B
BoxID = 123456789

one reader only: smartreader+