vU uno 4k se not flash

marcostandy

Registered
Messages
15
Hi
Have you formatted (FAT32) the USB before placing the image on it?
also VU+ only like small capacity USBS (7gb or under) for it to be recognised.
 

JAKITAKI

Super VIP
Messages
9,217
Yes with FAT32 USB is 8GB
Copy the extracted folder “vuplus” to your USB Stick

Power off the receiver
Ensure no other USB devices are plugged into the receiver while flashing
Insert the USB stick containing the image files into one of the USB ports on the receiver, rear USB port is advised if possible.
Power the receiver on.
 

piratt

Registered
Messages
71
Copy the extracted folder “vuplus” to your USB Stick

Power off the receiver
Ensure no other USB devices are plugged into the receiver while flashing
Insert the USB stick containing the image files into one of the USB ports on the receiver, rear USB port is advised if possible.
Power the receiver on.
Receiver not flashing
 

bibo2

Registered
Messages
6
hy to all,
I do have a vuuno4k and a "fatal error: Boot 2nd image failed", this is shoun at the in the Hyper Terminal on the end.
Can anyone help me in that case? Would highly be appreciated. The usb entries at the box do not work.
Thanks in advance
 
Top