Underworld 1.10

P

psykix

Registered
Messages
46
Has anyone managed to get it fully working on the 9000HD?

Mine plays up - sometimes I can get Premiere, but then Conax doesn't work, other times I get Conax, and no Premiere. There doesn't seem to be any rhyme or reason to it.

And DigitALB doesn't work at all in this receiver.

Cheers..
 
D

dxdy

VIP
Messages
669
what version of Diablo you have? 2.2 or 2.3?

you setup Diablo configuration correct?

what keys file you use?

if receiver have emulator, this also can be problem... you must turn off emu in receiver (if possible) or use firmware for receiver without emu...
 
V

Vipersan

Registered
Messages
134
...I can confirm Psykix is correct regarding Digitalb ...
I also use UW110 on my 2.3 diablo ..and cannot clear any of that package on 16East..
The cam is set up correctly as it performs perfectly in my Humax HDCI2000...

..also no emu in 9000 firmware ..latest official image..
rgds
 
Last edited:
X

xxxAxxx

Super VIP
Messages
1,172
ipbox not handel for pcm ...you can do nothink only DGS can fix this ..

dont forget all netion chip ci moduls not working in this box...

diablo one of them also...now

diablo 2.2 works ok..but 2.3 h/w 1.10 problem
 
V

Vipersan

Registered
Messages
134
xxxAxxx said:
ipbox not handel for pcm ...you can do nothink only DGS can fix this ..

dont forget all netion chip ci moduls not working in this box...

diablo one of them also...now

diablo 2.2 works ok..but 2.3 h/w 1.10 problem
Click to expand...

Thanks for the info xxxAxxx ...
Do you mean the hardware inside the 2.3 cam is where the problem lies ?
..if so would a 2.2 upgraded to 2.3 perform better ? ..as this would still have older hardware even though its firmware was upgraded ?
rgds
 
P

psykix

Registered
Messages
46
It works some of the time - but if I watch Premiere, then to get it to work on conax on Thor, I have to put it on a conax channel and then power off (at the mains) and back on, and then it works. However it then won't work on Premiere!

It is as though it has a problem switching between encryption types..

And yes, it's 2.3 running UW 1.10. Cam works just fine on everything in my Hivion receiver.
 
V

Vipersan

Registered
Messages
134
Hi Psykix...
As xxxAxxx has said ...it appears a diablo bought as a 2.3 has issues in this box due to its hardware configuration ..
Whereas a diablo bought as a 2.2 ..and then upgraded to 2.3 does not..
The internals of the 2 cams a physically different ..though they both will accomodate firmware 2.3 and subsequently UW110..
I guess we just have to wait for an image upgrade to use our cams fully ..with the 9000..
I would guess they would be aware of the problem ...and hopefully the update would be a fairly high priority ..as there must be a fair few 'bought as' diablo 2.3s in circulation.
rgds
 
X

xxxAxxx

Super VIP
Messages
1,172
not only him many user all over...

i'm sorry diablo 2.2 and 2.3 they are the same...i dont beleive use of chip is diffrent...

if they can update from 2.2 to 2.3 it's nothink to do with the chip... it's just a game to give a share to new team(underworld)or else how they going to make money if diablo dont coparete.... they will face a compateder...

it's going to be off topic but now memory the same and chip also but frimware diffrent cos how they coded the conax hack it's hardcoded not 32 bit is 33 bit key data .....it's the same way like the digiturk when it was hacked...

now you keep 2.2 or 2.3 in the module not going to help ...Dgs has to look in to this....
 
P

psykix

Registered
Messages
46
I have flashed back to official firmware 6153, and can confirm that Diablo 2.3 with Underworld 1.10 works perfectly on this firmware - even on Digitalb.

So something has changed in firmware newer than that..
 
V

Vipersan

Registered
Messages
134
Thanks for that info Psykix...
Looks like I might have to follow your lead and flash back myself then..
Pity as I will lose the benefits of the unofficial firmware Im using..
..Maybe it will also allow me to get CH4HD on Astra 28deg with my freesat card ...which also does not work atm ..
cheers m8
 
P

psykix

Registered
Messages
46
I have an update :-

My HDD wouldn't work via USB with 6153, so I reflashed with the latest NLB firmware released today. I then scrapped the database I had, and set up all the sats and channels via the receiver..

Diablo now works on Digitalb - I had never set up the channels on the receiver, had been using someone elses database and adding to it..

So, worth a try!

Cheers..
 
V

Vipersan

Registered
Messages
134
Thanks for the update Psykix...
If the latest NLB is ok with uw110 ...chances are the latest sifteam may also be as its based on same firmware..
I haven't tried a sifteam image yet so might try that too.
rgds
 
P

psykix

Registered
Messages
46
Can confirm that I have Diablo working on Digitalb, Premiere, TPS and Conax on latest NLB7304.
 
P

psykix

Registered
Messages
46
Yes, that's the one!

It freezes on Digitalb from time to time, but a reboot sorts it, and it works again. It's very windy here today in the UK, so maybe that is the problem. Although it does say I have 89% signal strength. It seems to be the Digitalb HD channels that are worst affected.
 
V

Vipersan

Registered
Messages
134
Also can confirm problem with sly /freesat card with UW110 ...fixed with NLB7043 :)
No probs clearing Channel4 HD now
rgds
 
Last edited:
You must log in or register to reply here.
Top