SRT 4620p TPS AUTO

[Acech]

SRT 4620p TPS AUTO

Please read files Upgrading SRT-4620 using SRT-4820 Patch.pdf.

 

[hassan voronezh]

pliz i need SW For SRT 4620.

 

[ali731981]

thanks man

 

[hassan voronezh]

Pliz tell me where files Upgrading SRT-4620 using SRT-4820 Patch.pdf.?

 

[garfy]

thank you but i dont know where this files

 

[akbara]

Upgrading SRT-4620 using SRT-4820 Patch

Upgrading SRT-4620 using SRT-4820 Patch
If you use SRT-4820 patch for upgrading your SRT-4620
receiver, you will observe that some of transponders do not
have any signal level.
In order to solve the problem you should do as follows:
Press Menu button Installation Factory Set
Choose yes.
Then
Press Menu button Installation LNB Configuration
Here in this menu you should define two satellites, for
example: Hotbird-A and Hotbird-B then insert the following
configurations:
Hotbird-A
Universal High L.o. 9750 Low L.o. 8000
Hotbird-B
Universal High L.o. 12200 Low L.o. 10600
Now, do as in bellow:
Press Menu button Installation TP Edit/Scan
At first, delete the transponders, which have stored in these
two satellites before and insert the new transponders in
bellow:
Hotbird-A
TP POL SR
10723 H 29900
10775 H 28000
10830 H 3333
10853 H 27500
10892 H 27500
10930 H 27500
10971 H 27500
11013 H 27500
11054 H 27500
11096 H 28000
11137 H 27500
11179 H 27500
11219 H 27500
11296 H 27500
11334 H 27500
11373 H 27500
11488 H 27500
Hotbird-A
TP POL SR
11526 H 27500
11566 H 27500
11604 H 27500
11642 H 27500
11681 H 27500
11747 H 27500
11785 H 27500
11823 H 27500
10719 V 27500
10758 V 27500
10796 V 27500
10834 V 27500
10873 V 27500
10911 V 27500
10949 V 27500
10992 V 27500
11034 V 27500
Hotbird-A
TP POL SR
11075 V 27500
11117 V 27500
11158 V 27500
11200 V 27500
11240 V 27500
11278 V 27500
11355 V 27500
11393 V 27500
11432 V 27500
11541 V 27500
11585 V 27500
11623 V 27500
11662 V 27500
11727 V 27500
11766 V 27500
11804 V 27500
Range = 10719 – 11823
Hotbird-B
TP POL SR
12145 H 3333
11938 H 27500
12015 H 27500
12092 H 27500
12169 H 27500
12207 H 27500
12245 H 27500
12284 H 27500
12322 H 27500
12360 H 27500
12399 H 27500
12437 H 27500
12476 H 27500
Hotbird-B
TP POL SR
12539 H 27500
12577 H 27500
12616 H 27500
12654 H 27500
12692 H 27500
12731 H 27500
11919 V 27500
12111 V 27500
12149 V 27500
12188 V 27500
12226 V 27500
12265 V 27500
12303 V 27500
Hotbird-B
TP POL SR
12380 V 27500
12460 V 27500
12520 V 27500
12558 V 27500
12597 V 27500
12635 V 27500
12673 V 27500
12713 V 27500
Range = 11919 - 12731
Do not use Satellite Scan option from Installation menu
because it makes many extra transponders and channels similar
to each other with different frequencies. So just, use the
TP Edit/Scan option from Installation menu and search each
satellite manually.
After this, you can upgrade your SRT-4620 receiver using SRT-
4820 Patch. Just insert 6969, repeat it again, and enjoy of
watching satellite programs. Furthermore, if you want to
receive signals of other satellites such as Nilesat, Arabsat
or Turksat, you should divide the frequency range of each
satellite into 2 parts similar to above and consider these two
important frequency ranges and configurations:
10719 – 11823 GHz Universal High L.o. 9750 Low L.o. 8000
11919 – 12731 GHz Universal High L.o. 12200 Low L.o. 10600
Prepared by:
ar_sot
IRAN

 

[tonton2]

Pliz tell me where files Upgrading SRT-4620 using SRT-4820 Patch.pdf.?

Bonsoir
ou peut on trouver le patch pour transformer le 4620p en 4820p merci d'avance pour vos reponse
bye