If deactivating Enigma2 with the order "init 4" before editing, and reactive it with "init 3" after the edition continues desapearing, you can use dreamboxEDIT, load the channels from the receiver, edit "lamedb" with a text editor like NotePad++, make all the necessary changes with the editor, load to receiver and reboot Enigma; look at lamedb if all are correct. You also can copy the channels from clief list to your list. You can edit or make more changes with the text editor.how do I change the lameb do the channels of the setting disappear with the writing N/A?
Does it work smoothly on OS MIO 4K?Works on Octagon SF 4008 and Edition OS mio 4K. I was finally able to set the channel correctly in lamedb and have it not disappear. I had everything fine except the channels in userbouquet, I put them as always before. I copied the channels from the clief list, then I saw the difference. I was not able to see that these should be written differently.
Thank you very much for your patience. I stayed here:Only for this mux, for the others just repeat steps 1 to 9 (modifying the respective services using tvh-json.py - e.g 11222H SID 3025 for PID 2025 and so on) and the first IPTV mux has the decoded channels I use PMT 8000 for everything, and make the Service ID equal to the Abertis PID.
As for the final error @Oskar3 I’m not sure about this sorry, it just worked for me in Ubuntu to build after installing the few dependencies.
Any idea how to build for enigma2First off, to build astra-sm in Linux (here in Ubuntu, with apt package manager). You need libtool and autoconf along with a C compiler -
Code:sudo apt install autoconf libtool git clone https://github.com/crazycat69/astra-sm.git cd astra-sm ./autogen.sh ./configure make sudo make install
Create an astra directory and put your astra.conf file in - /etc/astra.
Then you can create a service file to run astra-sm -
Code:sudo nano /etc/systemd/system/astra-sm.service
With the following inside -
Code:[Unit] Description=Astra SM Wants=network-online.target After=network-online.target [Service] ExecStart=astra /etc/astra/astra.conf WorkingDirectory=/etc/astra/ StandardOutput=inherit StandardError=inherit Restart=always User=hts [Install] WantedBy=multi-user.target
Finally run
Code:sudo systemctl start astra-sm sudo systemctl enable astra-sm
And the astra-sm service will be running, including automatically on machine boot.
opkg updateAny idea how to build for enigma2
Edited lambdb and all the steps for Enigma 2 the "services" part of my lamdb config disappears and i see these errors in the logs
Obvs no bitrate the transponder info stays but the serivices section for 802 gets removed.
I have tried editing with nano and in winscp
Nov 23 20:41:23 zgemmah9combo user.err astra[2119]: [10992plp0 #1] Bitrate:0Kbit/s PES:0 CC:0 Nov 23 20:41:23 zgemmah9combo user.err astra[2119]: [Abertis PID 802 #1] Bitrate:0Kbit/s PES:0 CC:0 Nov 23 20:41:24 zgemmah9combo user.err astra[2119]: [10992plp0 #1] Bitrate:0Kbit/s PES:0 CC:0 Nov 23 20:41:24 zgemmah9combo user.err astra[2119]: [Abertis PID 802 #1] Bitrate:0Kbit/s PES:0 CC:0 Nov 23 20:41:25 zgemmah9combo user.err astra[2119]: [10992plp0 #1] Bitrate:0Kbit/s PES:0 CC:0 Nov 23 20:41:25 zgemmah9combo user.err astra[2119]: [Abertis PID 802 #1] Bitrate:0Kbit/s PES:0 CC:0 Nov 23 20:41:26 zgemmah9combo user.err astra[2119]: [10992plp0 #1] Bitrate:0Kbit/s PES:0 CC:0 Nov 23 20:41:26 zgemmah9combo user.err astra[2119]: [10992plp0] Failed to switch to reserve Nov 23 20:41:26 zgemmah9combo user.err astra[2119]: [Abertis PID 802 #1] Bitrate:0Kbit/s PES:0 CC:0 Nov 23 20:41:26 zgemmah9combo user.err astra[2119]: [Abertis PID 802] Failed to switch to reserve Nov 23 20:41:26 zgemmah9combo user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff) Nov 23 20:41:26 zgemmah9combo user.err kernel: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff) Nov 23 20:41:32 zgemmah9combo user.err astra[2119]: [http_request 0.0.0.0:9999/abertis/pid802] receiving timeout Nov 23 20:41:38 zgemmah9combo user.err astra[2119]: [Abertis PID 802 #1] Bitrate:0Kbit/s PES:0 CC:0 Nov 23 20:41:39 zgemmah9combo user.err astra[2119]: [Abertis PID 802 #1] Bitrate:0Kbit/s PES:0 CC:0 Nov 23 20:41:40 zgemmah9combo user.err astra[2119]: [Abertis PID 802 #1] Bitrate:0Kbit/s PES:0 CC:0 Nov 23 20:41:41 zgemmah9combo user.err astra[2119]: [Abertis PID 802 #1] Bitrate:0Kbit/s PES:0 CC:0 Nov 23 20:41:41 zgemmah9combo user.err astra[2119]: [Abertis PID 802] Failed to switch to reserve
root@zgemmah9combo:~# astra --analyze http://localhost:8001/1:0:1:70A:EA7E:1:CE4AAAA:0:0:0:
Nov 24 11:40:55: INFO: Starting Astra SM 0.2
Nov 24 11:40:56: INFO: Bitrate: 0 Kbit/s
Nov 24 11:40:57: INFO: Bitrate: 0 Kbit/s
Nov 24 11:40:58: INFO: Bitrate: 0 Kbit/s
Nov 24 11:40:59: INFO: Bitrate: 0 Kbit/s
Thank you very much for your patience. I stayed here:
/home/hts/Abertis# ./tvh-json.py export 29cbe529acba1d42b5830798fc1132fa > abertis802.json
/usr/bin/env: «python»: No file or directory exists
Yes:Does it work smoothly on OS MIO 4K?
HTTP ERROR "http://localhost:9981/api/raw/export" 403 ForbiddenAhh you can just change the top line in the tvh-json.py file to:
#! /usr/bin/env python2
and that should make it work
"python" is a symlink to python2 or python3 depending on system, and is sometimes not set, so this fix just means we manually refer to python2 (it might work with 3, but it works fine with 2 on my system)
i' Want to build for AArch64 in enigmaopkg update
opkg install astra-sm