Spanish Abertis DTT Sat @ Hispasat 30W - Chat & How to guides

Galway

Registered
Messages
9
how about actually helping me out instead of asking me questions? If you are not familiar with the 2 (non enigma 2) receivers I need this information for then there is no point replying.
 

EnoSat

Senior Member
Messages
1,952
are you not able to run calc on PC and translate HEX to DEC?
capture-002-18012023-010317.png
 

Galway

Registered
Messages
9
tried that before your message and it does not work either, so no help. do you have the correct key? Can you PM it to me so I can check?
 

Stevenvc19

Donating Member
Messages
47
maybe someone else who is receiving this MUX using an Edision Primo or an Octagon SX88 can give me an answer I can understand
I receive the mux using EDISION IP S2.
What Enosat is trying to say is that you better learn how to receive this mux so you understand the process and do not depend on other people to do the work for you.
I'll give you a little hint. You can check the SID (the Stream ID, NOT the Service ID) on the flysat website and you can also find it on this website. Use 801 for SID ;) you quoted it in your first post :)
EDIT: 1801
 

davidoof

Registered
Messages
26
Excuse-me, I used a Vu Uno Plus 4K with Oscam Emu. I have used this configuration:

1. Send the attached channel list ( use Dreamboxedit )
2. Install astra-sm by telnet:
opkg update
opkg install astra-sm
Reboot
3. Put the file "abertis" in etc / astra / script
Give permissions 755
(Use an appropriate Abertis file , attached for the arm and mips receivers)
4. Put the astra.conf file in / etc / astra.
Permissions 755
5. Copy the sysctl.conf file to / etc
( thnaks Pirilampo Satuniverse for conf file )
6. Correct keys in softcamKey
Latest from enigma1969 is OK
Reboot
..:: ciefpsettings ::..

but no signal (black screen). I have to put the channel in lame.db? Is there someone expert that could help me? Thanks to all.
 

Galway

Registered
Messages
9
I receive the mux using EDISION IP S2.
What Enosat is trying to say is that you better learn how to receive this mux so you understand the process and do not depend on other people to do the work for you.
I'll give you a little hint. You can check the SID (the Stream ID, NOT the Service ID) on the flysat website and you can also find it on this website. Use 801 for SID ;) you quoted it in your first post :)
EDIT: 1801
Problem sorted out myself. The snow lowered the signal quality last night and it has to be high to decrypt then lock the channels which it did this morning
No issues receiving ALL of the other muxes. I fully understood the process before this anyway. Lucky i don't use Enigma 2 for this as I'd get no real assistance.
 

EnoSat

Senior Member
Messages
1,952
It was not mentioned in any post that it was snowing, nor that the signal quality was poor.
The question was - Hi I am looking for the Service ID for this new Mux - to which you received an answer using posts already published earlier
1801
 

Galway

Registered
Messages
9
It was not mentioned in any post that it was snowing, nor that the signal quality was poor.
The question was - Hi I am looking for the Service ID for this new Mux - to which you received an answer using posts already published earlier
1801
Do you have to be so pedantic?
 

davidoof

Registered
Messages
26
I have made ps command on telnet but I don't know how to send to you the results (there isn't Attachment possibility here)...
 

EnoSat

Senior Member
Messages
1,952
if you see something like this, the script is working
Code:
...
root      2158  0.0  0.0   1788   588 ?        Ss   10:33   0:00 /etc/astra/scripts/abertis 8001                                               
root      2159  0.0  0.0   1788   592 ?        Ss   10:33   0:00 /etc/astra/scripts/abertis 8002                                               
root      2161  0.0  0.0   1788   592 ?        Ss   10:33   0:00 /etc/astra/scripts/abertis 8003                                               
root      2162  0.0  0.0   1788   508 ?        Ss   10:33   0:00 /etc/astra/scripts/abertis 8004                                               
root      2163  0.0  0.0   1788   592 ?        Ss   10:33   0:00 /etc/astra/scripts/abertis 8005                                               
root      2166  0.0  0.0   1788   592 ?        Ss   10:33   0:00 /etc/astra/scripts/abertis 8006
...
and you need to check LiveLog oscam whether it decodes with the correct key
 

davidoof

Registered
Messages
26
I think the problem is in the keys:
  • 2023/01/20 12:04:36 7E48CBC4 c (ecm) dvbapiau (2600@000000/06A5/1FFF/11:CW:00000000000000000000000000000000_2600@): not found (1 ms) by emulator
  • 2023/01/20 12:04:37 7E48CBC4 c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 0 disabled ecmpids!
  • 2023/01/20 12:04:37 7E48CBC4 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 1645 VPID 0000
  • 2023/01/20 12:04:37 7E48CBC4 c (ecm) dvbapiau (2600@000000/06A5/1FFF/11:CW:00000000000000000000000000000000_2600@): not found (3 ms) by emulator
  • 2023/01/20 12:04:37 7E48CBC4 c (dvbapi) Demuxer 0 restarting decoding requests after 1 ms with 1 enabled and 0 disabled ecmpids!
  • 2023/01/20 12:04:37 7E48CBC4 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 1645 VPID 0000
  • 2023/01/20 12:04:37 7E48CBC4 c (ecm) dvbapiau (2600@000000/06A5/1FFF/11:CW:00000000000000000000000000000000_2600@): not found (1 ms) by emulator
  • 2023/01/20 12:04:38 7E48CBC4 c (dvbapi) Demuxer 0 restarting decoding requests after 1 ms with 1 enabled and 0 disabled ecmpids!
  • 2023/01/20 12:04:38 7E48CBC4 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 1645 VPID 0000
  • 2023/01/20 12:04:38 7E48CBC4 c (ecm) dvbapiau (2600@000000/06A5/1FFF/11:CW:00000000000000000000000000000000_2600@): not found (1 ms) by emulator
  • 2023/01/20 12:04:38 7E48CBC4 c (dvbapi) Demuxer 0 restarting decoding requests after 1 ms with 1 enabled and 0 disabled ecmpids!
  • 2023/01/20 12:04:38 7E48CBC4 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 1645 VPID 0000
  • 2023/01/20 12:04:38 7E48CBC4 c (ecm) dvbapiau (2600@000000/06A5/1FFF/11:CW:00000000000000000000000000000000_2600@): not found (1 ms) by emulator
  • 2023/01/20 12:04:39 7E48CBC4 c (dvbapi) Demuxer 0 restarting decoding requests after 1 ms with 1 enabled and 0 disabled ecmpids!
  • 2023/01/20 12:04:39 7E48CBC4 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 1645 VPID 0000
  • 2023/01/20 12:04:39 7E48CBC4 c (ecm) dvbapiau (2600@000000/06A5/1FFF/11:CW:00000000000000000000000000000000_2600@): not found (1 ms) by emulator
  • 2023/01/20 12:04:39 7E48CBC4 c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 0 disabled ecmpids!
  • 2023/01/20 12:04:39 7E48CBC4 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 1645 VPID 0000
  • 2023/01/20 12:04:39 7E48CBC4 c (ecm) dvbapiau (2600@000000/06A5/1FFF/11:CW:00000000000000000000000000000000_2600@): not found (2 ms) by emulator
  • 2023/01/20 12:04:40 7E48CBC4 c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 0 disabled ecmpids!
  • 2023/01/20 12:04:40 7E48CBC4 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 1645 VPID 0000
  • 2023/01/20 12:04:40 7E48CBC4 c (ecm) dvbapiau (2600@000000/06A5/1FFF/11:CW:00000000000000000000000000000000_2600@): not found (2 ms) by emulator
  • 2023/01/20 12:04:40 7E48CBC4 c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 0 disabled ecmpids!
  • 2023/01/20 12:04:40 7E48CBC4 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 1645 VPID 0000
  • 2023/01/20 12:04:40 7E48CBC4 c (ecm) dvbapiau (2600@000000/06A5/1FFF/11:CW:00000000000000000000000000000000_2600@): not found (1 ms) by emulator
  • 2023/01/20 12:04:41 7E48CBC4 c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 0 disabled ecmpids!
  • 2023/01/20 12:04:41 7E48CBC4 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 1645 VPID 0000
  • 2023/01/20 12:04:41 7E48CBC4 c (ecm) dvbapiau (2600@000000/06A5/1FFF/11:CW:00000000000000000000000000000000_2600@): not found (1 ms) by emulator
  • 2023/01/20 12:04:41 7E48CBC4 c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 0 disabled ecmpids!
  • 2023/01/20 12:04:41 7E48CBC4 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 1645 VPID 0000
  • 2023/01/20 12:04:41 7E48CBC4 c (ecm) dvbapiau (2600@000000/06A5/1FFF/11:CW:00000000000000000000000000000000_2600@): not found (1 ms) by emulator
  • 2023/01/20 12:04:42 7E48CBC4 c (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 0 disabled ecmpids!
  • 2023/01/20 12:04:42 7E48CBC4 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 1645 VPID 0000
  • 2023/01/20 12:04:42 7E48CBC4 c (ecm) dvbapiau (2600@000000/06A5/1FFF/11:CW:00000000000000000000000000000000_2600@): not found (1 ms) by emulator
  • 2023/01/20 12:04:42 7E48CBC4 c (dvbapi) Demuxer 0 restarting decoding requests after 1 ms with 1 enabled and 0 disabled ecmpids!
  • 2023/01/20 12:04:42 7E48CBC4 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 1645 VPID 0000
  • 2023/01/20 12:04:42 7E48CBC4 c (ecm) dvbapiau (2600@000000/06A5/1FFF/11:CW:00000000000000000000000000000000_2600@): not found (1 ms) by emulator
  • 2023/01/20 12:04:43 7E48CBC4 c (dvbapi) Demuxer 0 restarting decoding requests after 1 ms with 1 enabled and 0 disabled ecmpids!
  • 2023/01/20 12:04:43 7E48CBC4 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 1645 VPID 0000
  • 2023/01/20 12:04:43 78DDE308 r (emu) Key not found: F C2380DDD
  • 2023/01/20 12:04:43 78DDE308 r (emu) Key not found: F 15186227
  • 2023/01/20 12:04:43 78DDE308 r (emu) Key not found: F 06A502BD
  • 2023/01/20 12:04:43 78DDE308 r (emu) Key not found: F 06A51645
  • 2023/01/20 12:04:43 78DDE308 r (emu) Key not found: F 06A51FFF
 

EnoSat

Senior Member
Messages
1,952
so check in LiveLog where it loads the SoftCam.Key file and it needs to be updated as it doesn't have the necessary keys (or uses the wrong SID)
 
Top