anterocouto
Senior Member
- Messages
- 356
I make this post because so many asks I have received.
Reveivers as AMIKO 8900 Alien, AMIKO2, Golden Media Triplex, Etc. belong to the kind of FULAN
receivers, so in some ways are different for other ones but they use the same DCC as the
DREAMBOX and CCcam or OSCAM as well. They are difficult to program so we must have patience
and experience and you must have the DREAMBOX DCC. Amiko1 has proc. 7111. AMIKO2 have 7162
SPARK
1º- If you have the image above xx51 you must update the image in the menu to xx51 (It is in SPARK menu)
because it has the new BOOTLOADER. It take time. After you must update to xx58 and not
xx58NEW.
2º-This image works with Cccam but the image does not have it, so you must get the plugin named "plugin"
and then put it in a pen FORMATED in FAT32. Go to plugin menu and load it
Then you have Cccamxx14. Key and it must be GREEN.
3º- Now you have Cccam and Cccam.cfg. Go to /VAR/KEYS/ and edit Cccam.cfg as the same
with DREAMBOX with DCC
ENIGMA2
1º- Get in this forum a HDMU image ( 7162 ) (211) is the best and have almost everything.
After, I remember to get the REVOLUTION SKINS ( Black ) ( White ) etc. because
these skins are exclusive of the HDMU image.
2º- Get a pen formated in FAT32 and make a directory " enigma2 "
3º- After decompress the image, you will get 2 files and send them to " enigma2" pen
4º- Receiver OFF
Pen with the image in the back usb
Key ON + O.K. at same time
When you see Force, leave the key OK
Key CH- till you see Enig.
key volume +
It will flash. It take time
When you see Succ and then BOOT, take off the pen
5º- In enigma2 it works with OSCAM. It is in menu. There are 2 OSCAM, 6666 and 7884
I use the 6666 and to activate you must go to menu the HDMU center and key GREEN
Before you have to go to the plugin menu and get it there. There you will find plenty of
plugins to download.
6º - The OSCAM works like the Cccam and you will find to edit in /VAR/KEYS/OSCAM.server
just follow instructions
There are much more to say but you must be relax and you will get more experience.....
Reveivers as AMIKO 8900 Alien, AMIKO2, Golden Media Triplex, Etc. belong to the kind of FULAN
receivers, so in some ways are different for other ones but they use the same DCC as the
DREAMBOX and CCcam or OSCAM as well. They are difficult to program so we must have patience
and experience and you must have the DREAMBOX DCC. Amiko1 has proc. 7111. AMIKO2 have 7162
SPARK
1º- If you have the image above xx51 you must update the image in the menu to xx51 (It is in SPARK menu)
because it has the new BOOTLOADER. It take time. After you must update to xx58 and not
xx58NEW.
2º-This image works with Cccam but the image does not have it, so you must get the plugin named "plugin"
and then put it in a pen FORMATED in FAT32. Go to plugin menu and load it
Then you have Cccamxx14. Key and it must be GREEN.
3º- Now you have Cccam and Cccam.cfg. Go to /VAR/KEYS/ and edit Cccam.cfg as the same
with DREAMBOX with DCC
ENIGMA2
1º- Get in this forum a HDMU image ( 7162 ) (211) is the best and have almost everything.
After, I remember to get the REVOLUTION SKINS ( Black ) ( White ) etc. because
these skins are exclusive of the HDMU image.
2º- Get a pen formated in FAT32 and make a directory " enigma2 "
3º- After decompress the image, you will get 2 files and send them to " enigma2" pen
4º- Receiver OFF
Pen with the image in the back usb
Key ON + O.K. at same time
When you see Force, leave the key OK
Key CH- till you see Enig.
key volume +
It will flash. It take time
When you see Succ and then BOOT, take off the pen
5º- In enigma2 it works with OSCAM. It is in menu. There are 2 OSCAM, 6666 and 7884
I use the 6666 and to activate you must go to menu the HDMU center and key GREEN
Before you have to go to the plugin menu and get it there. There you will find plenty of
plugins to download.
6º - The OSCAM works like the Cccam and you will find to edit in /VAR/KEYS/OSCAM.server
just follow instructions
There are much more to say but you must be relax and you will get more experience.....