sly italia 09cd

[linux geek]

Hi there Im trying to go over to using oscam native rather than a cccam/oscam combo as have a tntsat card

have 4 cards in total only one I cant get to play is my sky italia card

it fails to initialize in the reader this is the latest reader config Ive tried

[reader]
label = SkyIT
Protocol = mouse
detect = CD
device = /dev/ttyUSB0
boxid = 123456
caid = 09cd
mhz = 357
cardmhz = 357
ident = 09cd:000000
group = 3
emmcache = 1,3,2
ecmwhitelist = 09cd@000000:B7,51
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blocknano = all
audisabled = 1
blockemm-bylen = 183,81

dose anyone have a working config for this caid

 

[guli]

Hi there Im trying to go over to using oscam native rather than a cccam/oscam combo as have a tntsat card

have 4 cards in total only one I cant get to play is my sky italia card

it fails to initialize in the reader this is the latest reader config Ive tried

[reader]
label = SkyIT
Protocol = mouse
detect = CD
device = /dev/ttyUSB0
boxid = 123456
caid = 09cd
mhz = 357
cardmhz = 357
ident = 09cd:000000
group = 3
emmcache = 1,3,2
ecmwhitelist = 09cd@000000:B7,51
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blocknano = all
audisabled = 1
blockemm-bylen = 183,81

dose anyone have a working config for this caid

i would suggest you try with these settings & restart & see what happens mate . all else looks good .

mhz = 600
cardmhz = 600

 

[linux geek]

thanks have already tried this

also have tried other cards on the smargo and they work under oscam

plus the smargo and sky it works fine under CCcam so the common factor is the card under oscam

running

OSCAM 1.20-unstable_svn build #5932

 

[cdr]

this should work for you sky it

[reader]
label = reader1
protocol = internal
device = /dev/sci0
Detect = CD
Fallback = 0
group = 1
caid = 09cd
#ident: = 09cd:000000
boxid = 12345678
mhz = 368
emmcache = 1,3,0
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1

 

[linux geek]

got it going

[reader]
label = SkyIT
Protocol = smargo
detect = CD
Group = 3
device = /dev/ttyUSB0
boxid = 123456
caid = 09cd
mhz = 600
cardmhz = 600
ident = 09cd:000000
emmcache = 1,3,2
ecmwhitelist = 09cd@000000:B7,51
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blocknano = all
audisabled = 1
blockemm-bylen = 183,81

 

[cdr]

linux geek wrote

got it going

good boy

 

[linux geek]

not sure why that would make a difference as the other card another card is working in smargo with Protocol = mouse

but as long as its working

 

[rooney72]

I tried the above config and when I telnet the oscam accepts the port and everything. But whilst it is in common interface I still cannot see my sky. Any reason?

Could it be that I put blocker in upper slot?
Is port 30000 ok?

btw the User file

[account]
user = xxxx1
pwd = xxxx2
group = 1
AU = SkyIT

I have put 2 Nlines, one in the oscam server and one in the receiving dreambox. What is the user/pwd? Is it for the receiving end or for the server end? Should I add another user/pwd for both Nlines.

I have tried practically everything now

 

[guli]

@rooney72

it would help to see the actual 3 configs you are using . to see where a mistake maybe .

 

[rooney72]

[global]

nice = -1
WaitForCards = 1
ClientTimeout = 5
CacheDelay = 120

[newcamd]

Key = 0102030405060708091011121314
Port = 15100@09cd:000000

[webif]

httpport = 16001
httpuser = root
httppwd = xxxxxxx
httprefresh = 10
httpallowed = 127.0.0.1

[reader]

label = SkyIT
Protocol = internal
detect = CD
device = /dev/sci0
Fallback = 0
Group = 1
EMMCache = 1,3,2
mhz = 368
BoxID = xxxxxxx
CAID = 09cd
ident = 09cd:000000
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1
blocknano = all
audisabled = 1

[account]
user = pwd
pwd = pwd
group = 1
AU = SkyIT

[account]
user = pwd1
pwd = pwd1
group = 1
AU = SkyIT

In the cccam.cfg of Oscam Server i have put this Nline:
N: 10.0.0.90 15100 pwd pwd 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

In the cccam.cfg of Db receiving from Oscam i have put this Nline:
N: 10.0.0.98 15100 pwd1 pwd1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

Whenever I put the 3 oscam files I reboot oscam server on common interface

Then I telnet Oscam server cd /var/bin and start oscam by typing ./oscam1, a file with oscam

Telnet tells me that pwd on 10.0.0.90 is recognised but I don't see anything on oscam server TV. On receiver TV s+y opens with other clines but not my card.

 

[linux geek]

what happens with you look at the web interface has the reader initialized the card ?

 

[rooney72]

On looking at the Telnet window, the user in the nline showed that it was accepted (ie on 10.0.0.90)

However on the oscam TV, which is still on Common Interface, S*y Italy cannot be seen even though the info windows shows hop 0.

On the receiver TV (10.0.0.90) the TV shows channel from S*y Italy from my other clines and not mine. When I zap on this receiver, the Telnet shows that channel is not recognised

 

[guli]

try with these changes & reboot . see what happens & post back .

oscam.conf

[newcamd]
Key = 0102030405060708091011121314
Port = 15100@09cd:000000;15200@09cd:000000

[webif]
httpport = 16001
httpuser = root
httppwd = xxxxxxx
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

oscam.server

[reader]
label = SkyIT
Protocol = internal
detect = CD
device = /dev/sci0
Fallback = 0
Group = 1
EMMCache = 1,3,2
mhz = 600
cardmhz = 600
BoxID = xxxxxxx
CAID = 09cd
ident = 09cd:000000
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1
blocknano = all
blockemm-bylen = 183,81
ecmwhitelist = 09cd@000000:B7,51
audisabled = 1

[reader]
label = SkyIT
protocol = newcamd
key = 0102030405060708091011121314
device = 192.168.0.100,15100 #example put your actual ip of server here
account = pwd,pwd
group = 1
fallback = 1

oscam.user

[account]
user = pwd
pwd = pwd
group = 1
#AU = SkyIT #you have au disabled in reader

[account]
user = pwd1
pwd = pwd1
group = 1
#AU = SkyIT #you have au disabled in reader

in CCcam.cfg

N: 127.0.0.1 15200 pwd1 pwd1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

 

[rooney72]

Thanks

I will try tomorrow and I will let you know about the outcome. btw I've seen another port 15200. This has to be forwarded with what? oscam server or receiving server?

You mentioned one Nline. What about the other Nline? Does that mean it is correct?

try with these changes & reboot . see what happens & post back .

oscam.conf

[newcamd]
Key = 0102030405060708091011121314
Port = 15100@09cd:000000;15200@09cd:000000

[webif]
httpport = 16001
httpuser = root
httppwd = xxxxxxx
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

oscam.server

[reader]
label = SkyIT
Protocol = internal
detect = CD
device = /dev/sci0
Fallback = 0
Group = 1
EMMCache = 1,3,2
mhz = 600
cardmhz = 600
BoxID = xxxxxxx
CAID = 09cd
ident = 09cd:000000
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1
blocknano = all
blockemm-bylen = 183,81
ecmwhitelist = 09cd@000000:B7,51
audisabled = 1

[reader]
label = SkyIT
protocol = newcamd
key = 0102030405060708091011121314
device = 192.168.0.100,15100 #example put your actual ip of server here
account = pwd,pwd
group = 1
fallback = 1

oscam.user

[account]
user = pwd
pwd = pwd
group = 1
#AU = SkyIT #you have au disabled in reader

[account]
user = pwd1
pwd = pwd1
group = 1
#AU = SkyIT #you have au disabled in reader

in CCcam.cfg

N: 127.0.0.1 15200 pwd1 pwd1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

 

[guli]

can you tell me why you need a line in oscam.server from yourself when if the oscam works it will serve the dmbox via a N line .

 

[guli]

if you do not need then the configs would need to be changed

 

[java]

add in oscam server


blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1
blocknano = all
audisabled=1
ecmwhitelist = B7,51
blockemm-bylen = 183,81 # Error 9994 EMM Code Length


093B is running without any problem on oscam only server with smargo with this configs

 

[rooney72]

Did not work out. I wonder why!!!

Another strange fact. The device = /dev/sci0. I have noticed that when the reader was in the upper slot, s*y italy shows a black picture with the information appearing that ecm is 0.95 and /dev/sc1

So I changed the reader to the lower slot and this time it was not recognised.

One thing for sure. I am getting frustrated by the minute. I have tried various configs but I am not managing to view s*y in oscam.

Any more help please?

try with these changes & reboot . see what happens & post back .

oscam.conf

[newcamd]
Key = 0102030405060708091011121314
Port = 15100@09cd:000000;15200@09cd:000000

[webif]
httpport = 16001
httpuser = root
httppwd = xxxxxxx
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

oscam.server

[reader]
label = SkyIT
Protocol = internal
detect = CD
device = /dev/sci0
Fallback = 0
Group = 1
EMMCache = 1,3,2
mhz = 600
cardmhz = 600
BoxID = xxxxxxx
CAID = 09cd
ident = 09cd:000000
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1
blocknano = all
blockemm-bylen = 183,81
ecmwhitelist = 09cd@000000:B7,51
audisabled = 1

[reader]
label = SkyIT
protocol = newcamd
key = 0102030405060708091011121314
device = 192.168.0.100,15100 #example put your actual ip of server here
account = pwd,pwd
group = 1
fallback = 1

oscam.user

[account]
user = pwd
pwd = pwd
group = 1
#AU = SkyIT #you have au disabled in reader

[account]
user = pwd1
pwd = pwd1
group = 1
#AU = SkyIT #you have au disabled in reader

in CCcam.cfg

N: 127.0.0.1 15200 pwd1 pwd1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

 

[rooney72]

Is this for 093B? Mine is 09CD

add in oscam server


blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1
blocknano = all
audisabled=1
ecmwhitelist = B7,51
blockemm-bylen = 183,81 # Error 9994 EMM Code Length


093B is running without any problem on oscam only server with smargo with this configs

 

[rooney72]

I am going to give my latest

#
# main configuration
#
[global]
#nice = -1
WaitForCards = 1
#logging pidfile = /var/run/oscam.pid
#logfile = /var/log/oscam.log
usrfile = /var/log/oscamuser.logcw
logdir = /var/log/oscam/cw

# monitor

[monitor]
port = 988
aulow = 120mon
level = 1

# protocols
[newcamd]
Key = 0102030405060708091011121314
Port = 15100@09cd:000000;15200@09cd:000000

[webif]
httpport = 16001
httpuser = root
httppwd = xxxxxx
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

[reader]
Label = SkyIT
Protocol = internal
Detect = CD
Device = /dev/sci0
Customspeed = 1
mhz = 500
EMMCache = 1,3,2
BoxID = xxxxxxx
Group = 1
Fallback = 0
CAID = 09cd
Ident = 09cd:000000
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1
blocknano = all
blockemm-bylen = 183,81
ecmwhitelist = 09cd@000000:B7,51
audisabled = 1

[reader]
label = SkyIT
protocol = newcamd
key = 0102030405060708091011121314
device = 10.0.0.98,15100 #example put your actual ip of server here
account = gusto,gusto
group = 1
fallback = 1


[account]

user = gusto
pwd = gusto
group = 1
uniq = 1
caid = 09cd
ident = 09cd:000000
AU = SkyItalia
monlevel = 0


[account]
user = gusto1
pwd = gusto1
group = 1
uniq = 1
caid = 09cd
ident = 09cd:000000
AU = SkyItalia
monlevel = 0

I am also attaching the telnet screen where it shows that everything seems ok.




As I said in my previous posts. On rebooting with Common Interface and then telneting to start oscam, I cannot see the picture. Something is wrong.

Later on an error starts appearing



What about ports?
What about Nline?
Why I cannot see the picture?

Help Thanks