Scrambled T2-MI - Astra 4A at 4.8°E

percivjr

percivjr

Registered
Messages
461
EnoSat said:

Scrambled T2-MI - Astra 4A at 4.8°E

12245.34 V - DVB-S2/8PSK - SR-30000 FEC-2/3 activated new scrambled T2-MI mux
www.sat-universe.com www.sat-universe.com
Click to expand...
But I'm using f:1

Here are the errors in the log:
osmio4kplus user.err astra[612]: [KRRT MX 7 Test] Failed to switch to reserve
osmio4kplus user.err astra[612]: [http_request localhost:8001/1:0:1:320:35:55:300000:0:0:0] receiving timeout
osmio4kplus user.err kernel: dvb_demux: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
osmio4kplus user.err astra[612]: [KRRT MX 7 Test #1] Bitrate:0Kbit/s PES:0 CC:0
 
G

Gregory90

Registered
Messages
134
...

my two T2-MI capable non-E2 receivers (GTM-V8 Turbo/ApeBox C2 4K) unfortunately do not load any programs on the new Txp despite a good signal. Apparently the (BISS) encoding is an obstacle to save the programs in the channel list. :(

Maybe someone here also has this Rx and an idea how the "problem" can be solved?

regards
 
percivjr

percivjr

Registered
Messages
461
EnoSat said:
wrong lamedb or astra.conf
you can try the check according to point 9
Click to expand...

Thanks.

I'm getting nowhere fast with this! Abertis is working and I had mediaset0/12585plp0 working while it lasted.

Here's my lamedb:
Code: 
00300000:0035:0055
        s 12245000:30000000:1:2:48:2:0:1:2:0:2
/

0320:00300000:0035:0055:1:0:0                
12245Vdec_plp_0                             
p:MX-7,c:151000,C:0000,f:1

and key:
Code: 
F 03201000 00000000 1111113311111133

and I seem to have a good signal:
Screenshot_2023-02-02_17-37-47.png

But:
Code: 
astra --analyze http://localhost:8001/1:0:1:320:35:55:300000:0:0:0
Feb 02 17:27:17: INFO: Starting Astra SM 0.2
Feb 02 17:27:18: INFO: Bitrate: 0 Kbit/s
Feb 02 17:27:19: INFO: Bitrate: 0 Kbit/s
Feb 02 17:27:20: INFO: Bitrate: 0 Kbit/s
Feb 02 17:27:22: INFO: Bitrate: 0 Kbit/s

Can somebody tell me where I'm going wrong please?
 
percivjr

percivjr

Registered
Messages
461
Satmoik said:
Trying to get this on the Octagon SX88 proves difficult.Pure guesswork as to what SID to use in the key section or what T2mi Pid (s) in the search.
Any idea or help? Thanks a lot.
Click to expand...
Does anybody have this working on an E2 box???????????
 
EnoSat

EnoSat

Senior Member
Messages
1,982
percivjr said:
astra --analyze http://localhost:8001/1:0:1:320:35:55:300000:0:0:0
Feb 02 17:27:17: INFO: Starting Astra SM 0.2
Feb 02 17:27:18: INFO: Bitrate: 0 Kbit/s
Feb 02 17:27:19: INFO: Bitrate: 0 Kbit/s
Feb 02 17:27:20: INFO: Bitrate: 0 Kbit/s
Feb 02 17:27:22: INFO: Bitrate: 0 Kbit/s
[/CODE]

Can somebody tell me where I'm going wrong please?
Click to expand...
Since you have a signal but zero data, you have a problem with lamedb or with T2MI pid decoding from lamedb - try checking oscam's LiveLog after switching to 12245Vdec_plp_0
 
Last edited:
percivjr

percivjr

Registered
Messages
461
I think I've got a signal:
Tuner Signal Quality SNR: 78

Where don't I have "satellite 03000000 defined" (6 zeroes) ?
 
percivjr

percivjr

Registered
Messages
461
EnoSat said:
sorry, I didn't look at the picture, the post has already been edited
Click to expand...
I posted my lamedb entries (post 29).

And from post 11, my oscam log:
(dvbapi) PMT mode 6: Successfully connected to CA PMT server (fd 6)
(dvbapi) Demuxer 0 found 0 ECM pids and 12 STREAM pids in CA PM

which isn't much help. That's why I'm stumped!!
 
EnoSat

EnoSat

Senior Member
Messages
1,982
none info CA_id 2600 = not decode T2-MI pid = none streams
Code: 
2023/02/03 00:10:01 1FAC2288 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 2600 ECM_PID: 1FFF PROVID: 000000
2023/02/03 00:10:01 1FAC2288 c   (dvbapi) Demuxer 0 found 1 ECM pids and 1 STREAM pids in CA PMT
2023/02/03 00:10:01 1FAC2288 c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 0020 VPID 0000
2023/02/03 00:10:01 418AB3F1 r      (emu) Key not found: F 0E305C45
2023/02/03 00:10:01 418AB3F1 r      (emu) Key not found: F CA99721C
2023/02/03 00:10:01 418AB3F1 r      (emu) Key not found: F 00350055
2023/02/03 00:10:01 418AB3F1 r      (emu) Key not found: F 03201000
2023/02/03 00:10:01 418AB3F1 r      (emu) Key not found: F 03200020
2023/02/03 00:10:01 418AB3F1 r      (emu) Key not found: F 03201FFF
2023/02/03 00:10:01 418AB3F1 r      (emu) Key not found: F A11FEED5
2023/02/03 00:10:01 418AB3F1 r      (emu) Example key based on namespace hash: F 0E305C45 00000000 XXXXXXXXXXXXXXXX ;   4.8E 12245V sid:0320 added: 2023-02-03 @ 00:10
2023/02/03 00:10:01 418AB3F1 r      (emu) Example key based on universal hash: F CA99721C 00000000 XXXXXXXXXXXXXXXX ; av:1 pmt:0020 sid:0320 added: 2023-02-03 @ 00:10
2023/02/03 00:10:01 418AB3F1 r      (emu) ECM failed: Key not found
2023/02/03 00:10:01 1FAC2288 c      (ecm) LOCAL (2600&/0000/1FFF/0320/11:0000_11111133111111331111113311111133 HOP:03): found (90 ms) by OCO (F/2/2/2) (real 88 ms)
2023/02/03 00:10:07 1FAC2288 c   (config) 14 service-id's loaded in 0 ms
 
percivjr

percivjr

Registered
Messages
461
This is what I'm not getting:
[CODE}
2023/02/03 00:10:01 1FAC2288 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 2600 ECM_PID: 1FFF PROVID: 000000
[/CODE]
 
Crazy Sat

Crazy Sat

Donating Member
Messages
297
4.9°E

12245 V SR-30000 DVB-S2/8PSK 2/3
T2-MI BISS
Channels:
Click to expand...

Inter, Mega, Pravda Tut, Test Bar, Zoom, Pershij, Nickel, Suspilne Kultura, Xsport, Karavan, Rada, Sonce,
Click to expand...

Can you tell something more about the right parameters of T2-MI ?
 
You must log in or register to reply here.
Top