rqcs Help

[cooler]

Hi, am trying to run rqcs with new n3 card, and I need help to figure out why it shuts-down and wont run?

This is the log, does it mean the card has dt08 method and something else causes the error or does the error mean it does not have the dt08 method?

Thanks

Configuration settings:
  Debug level: 3

Starting Logical Slot 'Lower' [Users: 1]
------------------------------------------------------------------------------
Device Path: /dev/sci0 | Listening Port: 10001
------------------------------------------------------------------------------

  Opening sci... Done
  Detecting card... Card present
  Resetting card... Done
  Identifying card type...
    Historical bytes: D  N  A  S  P  1  8  0     M  e  r  0  0  0     
                      44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30
    Card type:        Nagra
    ROM Revision:     180
    EEPROM Revision:  Mer000

  Configuring sci...
    SCI | f: 3574595 | T: 1 | ETU: 32 | EGT: 1 | CWT: 25 | BWT: 89291 | WWT: 0

  Slot custom parameters:
    box_key: xxxx5A5xxx7Cxxxx
    dt06_key_0d:
    cam_n:
    secondary_key:
    rsa_key:
    des_key: 0102030405060708091011121314
   
  Card start-up initialization...
    Using DT08 session negotiation method:
    Setting Field Size:                 Done
    Retrieving IRD serial number:       3E5Cxxxx
    Retrieving CAM serial number:       792Dxxxx
    Retrieving System IDs:              5B01,5B03
    Retrieving CAM modulus (DT08):      Done
    Retrieving CAM challenge data:      Done
    Performing Session Key Negotiation: CAM modulus (DT08) decryption failed.
   
  Card start-up initialization...
    Using DT08 session negotiation method:
    Setting Field Size:                 Done
    Retrieving IRD serial number:       3E5Cxxxx
    Retrieving CAM serial number:       792Dxxxx
    Retrieving System IDs:              5B01,5B03
    Retrieving CAM modulus (DT08):      Done
    Retrieving CAM challenge data:      Done
    Performing Session Key Negotiation: CAM modulus (DT08) decryption failed.
   
  Card start-up initialization...
    Using DT08 session negotiation method:
    Setting Field Size:                 Done
    Retrieving IRD serial number:       3E5Cxxxx
    Retrieving CAM serial number:       792Dxxxx
    Retrieving System IDs:              5B01,5B03
    Retrieving CAM modulus (DT08):      Done
    Retrieving CAM challenge data:      Done
    Performing Session Key Negotiation: CAM modulus (DT08) decryption failed.
   
  Card start-up initialization...
    Using DT08 session negotiation method:
    Setting Field Size:                 Done
    Retrieving IRD serial number:       3E5Cxxxx
    Retrieving CAM serial number:       792Dxxxx
    Retrieving System IDs:              5B01,5B03
    Retrieving CAM modulus (DT08):      Done
    Retrieving CAM challenge data:      Done
    Performing Session Key Negotiation: CAM modulus (DT08) decryption failed.
   
  Card start-up initialization...
    Using DT08 session negotiation method:
    Setting Field Size:                 Done
    Retrieving IRD serial number:       3E5Cxxxx
    Retrieving CAM serial number:       792Dxxxx
    Retrieving System IDs:              5B01,5B03
    Retrieving CAM modulus (DT08):      Done
    Retrieving CAM challenge data:      Done
    Performing Session Key Negotiation: CAM modulus (DT08) decryption failed.
   

Logical Slot 'Lower' Disabled.
------------------------------------------------------------------------------


ERROR: No slots are active. Exiting.
SHUTDOWN **** [1970-01-01 12:14:42a] Terminate signal received...

 

[elgeneral]

the project RqCamd rqcs by raton craquero is finish in the last 2 or 3 month


oscam is best opcion


saludos

 

[poroto40]

input your sk card number in the config
they will run well

 

[leejohn112]

Hallo
I have a problem my SKY UK cable cannel is gone I was using the X cruiser w3105ZN, I just bought the Technomate TM500 and I don’t know how to use it I thing I need a software. Please help me which box is working at the moment for SKY uk
Please help

 

[IMnobody]

input your sk card number in the config
they will run well

That's not right, If both BK & SK on in the .conf file, SK wins out. DT06 supersede the DT08 method if any part of it is installed.
What you need to do is neuter your .conf file ("x" out, no keys), and post it. So someone can see which flags are set wrong.

IM

 

[takiak]

if you still have thatproblem......you may have to enable that Lower port conf file