question QBOXHD-NAPO-BKP-DF-21102009 fix

[stubugs]

how do you add more than 13 and 19 east usals work but cannot find more than these sats and if i do a channel restore and select say sly uk all it says is tunner failed any ideas chaps
stubugs

 

[kaneguru]

how do you add more than 13 and 19 east usals work but cannot find more than these sats and if i do a channel restore and select say sly uk all it says is tunner failed any ideas chaps
stubugs

you need a new satellites.xml

copy this to /etc/enigma2

after newstart of the skin,you can see more satellites

 

[imaswine]

Just upload a DM800 or 8000 channel list to the Qbox_HD and your sorted.

 

[moongoose]

Hello! For example you can use Dreamset 2.23 it's work's fine :thum:

how do you add more than 13 and 19 east usals work but cannot find more than these sats and if i do a channel restore and select say sly uk all it says is tunner failed any ideas chaps
stubugs

 

[bernex]

Hi evrybody i have a seem problem and i get the satellites.xml file put it in ect/enigma2 and i found it but now when i make srvice scan first its very slow to make scan after the qbox dont found any channel what can i do.
many thanks

 

[neo501]

...the satellites.xml file put it in ect/enigma2...

thats wrong !

you must put it to: /etc/tuxbox !!

 

[bernex]

thanx for answer but dosn't work i put it in /ect/tuxbox and make a scan no way i get msg
scan 100% done 0 service found.
tell me what i make wrong to get the is msg

 

[Lmkiu]

Download; List of channels for QboxHD from 42E to 30W. from post #5 below and load via updater v 1.04/Settings.

Then, Restart QboxHD via rear powerswitch, you can now configure tuner as to which satellites you want to pick up, retune etc.

http://www.sat-universe.com/showthread.php?p=510687#post510687

 

[neo501]

are you sure, that your Tuner-Configutation is correct ??

 

[bernex]

yes i have dreambox 800 hd and i think its seem configuration.

 

[neo501]

don´t think, check it !!

 

[bernex]

thanx again neo501 for your help.
this is my tuner configuration
1-tuner b:cx24116 (DVB-S2)
2-configuration mode simple
3-mode Disq A/B/C/D
4-Port A Hotbird 13.0 E
5-port B Astra 19.0 E
6-Port C Atlantic 8.0 W
7-Port D Atlantic 7.0 w
8-Set voltage YES
9-Send Disecq No

&
information about my qbox version EDG.Nemesis HD 1 mod.by Webkurier
Enigma.QBOXHD .DEC 23 2009
Image.QBOX HD DEC 24 2009

 

[neo501]

it looks good.

but is the configuration equal with your dm ??
(Port A = Hotbird, Port B `Astra ....)

 

[bernex]

yes its equal in my DM now i try to change the software to roy image qboxhd update 25.12.2009 bur no way the qbox don`t accept the new version.

 

[leonardua]

hi moongoose
i have problem with channels of sky uk. i have put to my box List of channels QboxHD from 42E to 30W but when i turn to the sky uk said the mesage that tunner faild.
in the other post i have read that you use dreamset2.23.
how do you put to the box and were do you find this dreamset.
leonardi

 

[neo501]

dreamset is an settings-editor for your computer !

 

[moongoose]

Dreamset

Hi!
http://mmedit9800.tripod.com/

hi moongoose
i have problem with channels of sky uk. i have put to my box List of channels QboxHD from 42E to 30W but when i turn to the sky uk said the mesage that tunner faild.
in the other post i have read that you use dreamset2.23.
how do you put to the box and were do you find this dreamset.
leonardi

 

[leonardua]

hi

Hi!
http://mmedit9800.tripod.com/

thanks mate

 

[leonardua]

hi moongoose
how it works the dreamset to fix the bouquet? i chech the DIGi tv and did not works, said tunner failed.
please some instruction to make works these boucket.
leonardi

 

[stubugs]

i cannot get more thn 2 sats with roys image either all iget is tunner failed ?? help
stubugs