problem with emu download

[shahr773]

hi all
my problem is that I can download data from sammy to pc but not from pc to sammy. please help
data cable correct wiring

 

[maumixio]

Which emu and DSR Studio are you using?
With latest emu 8.3 you can use only DSR Studio 1.5.1 and decoder must be set on sharing mode = NONE !!!! otherwise you get errors.
This emu 8.3 is good for "cs" otherwise go back to 8.2 and studio 1.3.

 

[shahr773]

thanks I will try it

 

[Vangeli]

Hi!My problem is that: I can't download Setting from pc to sammy!Please help me!(conection broken)I put RevGold 8.2 and work SemcoEditor2.4 and SetEdit 1.09.Thank's!

 

[maumixio]

@Vangeli: it is emu problem (this thread) or connection problems? I mean, Studio works?

Again: to make all futures working correctly via serial rs232 from/to Samsung and PC in emu 8.3 you must set sharing mode to NONE. ALL FUTURES includes tranfer settings too!

When you set any CS mode, emu 8.3 acquires priority to com port and if you want serial port for any other application disable cs (NONE) in emu menu.
If you want to check established connection and cable try with hyperterminal turning on sammy from back switch... you may get log on PC screen.

 

[shahr773]

Which emu and DSR Studio are you using?
With latest emu 8.3 you can use only DSR Studio 1.5.1 and decoder must be set on sharing mode = NONE !!!! otherwise you get errors.
This emu 8.3 is good for "cs" otherwise go back to 8.2 and studio 1.3.

thanks as you said with setting sharing to none every things are ok!!

 

[hameddivan]

how to can backup channle in emu 8.3?software?and how to? tanks

 

[cuorino]

Semcoedit or samedit