problem when I jtag my azbox hd

[majz]

I have a problem when I jtag my azbox hd all goes well untill I get to this stage

Yamon> load -b tftp://192.168.1.102/vmlinux.bin 0x90020000

About to load tftp://192.168.168.10/vmlinux.bin
Press Ctrl-C to break
................................. ...............................
................................. ...............................
................................. ...............................
................................. ...............................
................................. ......
Start = 0x90020000, range = (0x90020000,0x9001ffff), format = BINARY
Length = 0x0 (0)
Checksum = 0x00000000

Yamon>

I think it should read this
About to load tftp://192.168.168.10/vmlinux.bin
Press Ctrl-C to break
................................. ...............................
................................. ...............................
................................. ...............................
................................. ...............................
................................. ......
Start = 0x90020000, range = (0x90020000,0x9095880f), format = BINARY
Length = 0x938810 (9668624)
Checksum = 0x2254194d
can anyone help me with this problem

 

[majz]

FIXED IT

 

[pe.tardo]

FIXED IT

Could you explain how did you fixed it?
Thx in advance

 

[majz]

Could you explain how did you fixed it?
Thx in advance

Quite simple I switched off at the rear and rebotted it and all was back to normal