Oscam dvbapi experiences anyone?
- Thread starter Rocknroll
- Start date
Partybuster
Registered
- Messages
- 53
Hi Rocknroll
it works for sure, 100%, at last!
I have on my coolstream 4 to 5 cccam connections and also 1 camd connection to another oscam server. it handles everything just fine.
I already removed mgcamd from my cool machine
it works for sure, 100%, at last!
I have on my coolstream 4 to 5 cccam connections and also 1 camd connection to another oscam server. it handles everything just fine.
I already removed mgcamd from my cool machine
???wich image-wich oscam?? you use?and dvbapi than?
Sounds good tell please more about my quistions than I have!
Because my oscam is freezing every 1 min.need to recover oscam.on C
cooli zee!:mecry:
what rec, you use?
etc,
Iam getting cccam runnibg under oscam w. cline but freezing
sounds you got the anwer for use I think
Thk Glenn
Hi Rocknroll
it works for sure, 100%, at last!
I have on my coolstream 4 to 5 cccam connections and also 1 camd connection to another oscam server. it handles everything just fine.
I already removed mgcamd from my cool machine
Sounds good tell please more about my quistions than I have!
Because my oscam is freezing every 1 min.need to recover oscam.on C
cooli zee!:mecry:
what rec, you use?
etc,
Iam getting cccam runnibg under oscam w. cline but freezing
sounds you got the anwer for use I think
Thk Glenn
about img (ie NG img)
you need the bin oscam
in var/bin ( attributes 755 or 777)and in var tuxbox config you can see ( will magically appear after you put the Bin) , oscam.server, oscam.user, oscam.dvbapi, oscam.conf
these files are the only essential
Then .... you have to study how to fill in the right way: D: D
Yes, understand that.
What do we do with oscam.dvbapi ?
Also a file called whitelist, is this neccessary for use with cccam server?
Here is what you need.
# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn build #6801
# Read more: http://streamboard.gmc.to/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt
[global]
logfile = /tmp/oscam.log;stdout
maxlogsize = 512
nice = -1
waitforcards = 0
preferlocalcards = 1
saveinithistory = 1
lb_mode = 1
lb_savepath =
lb_max_readers = 3
[monitor]
port = 988
aulow = 120
hideclient_to = 15
monlevel = 1
appendchaninfo = 0
[cccam]
port = 12000
reshare = 4
version = 2.1.4
[dvbapi]
enabled = 1
au = 1
boxtype = none
user = coolstream
[webif]
httpport = 16001
httpuser = oscam
httppwd = oscam
httprefresh = 10
httpallowed = 0.0.0.0-255.255.255.255
#
# dvbapi configuration
#
# types:
# P - Priority
# format:
# P: <caid>:[<provider>]:[<srvid>]:[<ecmpid>]
# I - Ignore
# format:
# I: <caid>:[<provider>]:[<srvid>]:[<ecmpid>]
# M - Map
# format:
# M: <caid>:[<provider>]:[<srvid>]:[<ecmpid>] <target caid>:[<target provider>]
# D - Delay
# format:
# D: <caid>:[<provider>]:[<srvid>]:[<ecmpid>] <delay (ms)>
#
#
#
#p: 0500:023800 # prioritize 0500 with provider 023800
#P: :::1BCD # prioritize ecm stream with pid 1BCD on any channel
#P: 1722 # prioritize 1722
#P: 1830::EF75 # prioritize 1830 on channel EF75 only
#M: 1830 1830:003411 # map caid 1830 always to provider 003411
#D: 1702 200 # wait 200ms before writing cw on caid 1702
#I: :002000 # ignore provider 002000 on every channel
#I: 0 # ignore every caid that was not handled before
# These dvbapi settings works fine for CDS NL / BE, for other cards see oscam wiki on pli forum or oscam wiki on streamboard forum.
P: 0500:43800
P: 0963:00000
P: 0b00:00000 1
P: 1702:00000
P: 0919:00000
P: 0100:04106
P: 0100:0006A
P: 0100:003311
P: 0500:023700:278D
I: 0961:00000
I: 09C4:00000
[reader]
label = Canal+
enable = 1
protocol = internal
device = /dev/sci0
detect = cd
mhz = 500
cardmhz = 500
caid =
ident =
services =
group = 1
emmcache = 1,3,2
lb_weight = 100
cccreshare = 3
[reader]
label=Clarke Tech
enable=1
protocol=cccam
device=192.168.1.xx,12000
user=cool
password=cool
cccwantemu=0
cccversion=2.1.2
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccversion=2.1.2
cccmaxhops=10
ccckeepalive=1
[account]
user = oscam
pwd = oscam
group = 1
au = 1
monlevel = 4
# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn build #6801
# Read more: http://streamboard.gmc.to/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt
[global]
logfile = /tmp/oscam.log;stdout
maxlogsize = 512
nice = -1
waitforcards = 0
preferlocalcards = 1
saveinithistory = 1
lb_mode = 1
lb_savepath =
lb_max_readers = 3
[monitor]
port = 988
aulow = 120
hideclient_to = 15
monlevel = 1
appendchaninfo = 0
[cccam]
port = 12000
reshare = 4
version = 2.1.4
[dvbapi]
enabled = 1
au = 1
boxtype = none
user = coolstream
[webif]
httpport = 16001
httpuser = oscam
httppwd = oscam
httprefresh = 10
httpallowed = 0.0.0.0-255.255.255.255
#
# dvbapi configuration
#
# types:
# P - Priority
# format:
# P: <caid>:[<provider>]:[<srvid>]:[<ecmpid>]
# I - Ignore
# format:
# I: <caid>:[<provider>]:[<srvid>]:[<ecmpid>]
# M - Map
# format:
# M: <caid>:[<provider>]:[<srvid>]:[<ecmpid>] <target caid>:[<target provider>]
# D - Delay
# format:
# D: <caid>:[<provider>]:[<srvid>]:[<ecmpid>] <delay (ms)>
#
#
#
#p: 0500:023800 # prioritize 0500 with provider 023800
#P: :::1BCD # prioritize ecm stream with pid 1BCD on any channel
#P: 1722 # prioritize 1722
#P: 1830::EF75 # prioritize 1830 on channel EF75 only
#M: 1830 1830:003411 # map caid 1830 always to provider 003411
#D: 1702 200 # wait 200ms before writing cw on caid 1702
#I: :002000 # ignore provider 002000 on every channel
#I: 0 # ignore every caid that was not handled before
# These dvbapi settings works fine for CDS NL / BE, for other cards see oscam wiki on pli forum or oscam wiki on streamboard forum.
P: 0500:43800
P: 0963:00000
P: 0b00:00000 1
P: 1702:00000
P: 0919:00000
P: 0100:04106
P: 0100:0006A
P: 0100:003311
P: 0500:023700:278D
I: 0961:00000
I: 09C4:00000
[reader]
label = Canal+
enable = 1
protocol = internal
device = /dev/sci0
detect = cd
mhz = 500
cardmhz = 500
caid =
ident =
services =
group = 1
emmcache = 1,3,2
lb_weight = 100
cccreshare = 3
[reader]
label=Clarke Tech
enable=1
protocol=cccam
device=192.168.1.xx,12000
user=cool
password=cool
cccwantemu=0
cccversion=2.1.2
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccversion=2.1.2
cccmaxhops=10
ccckeepalive=1
[account]
user = oscam
pwd = oscam
group = 1
au = 1
monlevel = 4
in oscam.dvbapi
you write preferences for caid related to your card, or at least to get what you want.
and without this file does not work oscam alone.
if you want to investigate the matter,
I'll put a doc
where you will find examples, syntax and meaning of each word and parameter (txt)
Channel freeze
I have tried different settings in the files: oscam.conf, oscam.server and oscam.user and mg_conf.
Theese are the files I have found I need to run remote cccam lines to an Oscam server. Have also got conf files from oscam conf creator.
It seems that Mgcamd is the motor for Oscam to decode the c lines on cccam server. When I switch off mgcam the decode stops, when I switch off the Oscam it still decodes.
There are problems with some channels that they freeze for shorter or longer time. Can perhaps be during ecm change. While other channels are perfect.
So I wonder if there are anything that can be done to stop the
freeze ?
Can the channel info (caid, pid) for the problem channels be entered into a conf file to make things better.
I have the Oscam 9003 version, but it was the same on earlier versions.
Receiver is Coolstream Neo and the last NG Neutrino hd v.2.40, but was the same on v.2.30.
And the satellite is Thor 1 W.
Use no card only remote user.
When I try Mgcamd/Newcamd525 and CWS lines on the same channels, all are perfect.
Can it be the internet connection (10/2 Mbps)?
There are some logs options, any log that can catch the problem ?
I have tried different settings in the files: oscam.conf, oscam.server and oscam.user and mg_conf.
Theese are the files I have found I need to run remote cccam lines to an Oscam server. Have also got conf files from oscam conf creator.
It seems that Mgcamd is the motor for Oscam to decode the c lines on cccam server. When I switch off mgcam the decode stops, when I switch off the Oscam it still decodes.
There are problems with some channels that they freeze for shorter or longer time. Can perhaps be during ecm change. While other channels are perfect.
So I wonder if there are anything that can be done to stop the
freeze ?
Can the channel info (caid, pid) for the problem channels be entered into a conf file to make things better.
I have the Oscam 9003 version, but it was the same on earlier versions.
Receiver is Coolstream Neo and the last NG Neutrino hd v.2.40, but was the same on v.2.30.
And the satellite is Thor 1 W.
Use no card only remote user.
When I try Mgcamd/Newcamd525 and CWS lines on the same channels, all are perfect.
Can it be the internet connection (10/2 Mbps)?
There are some logs options, any log that can catch the problem ?
Hi.
I have made conf files with oscam config generator and have not
selected mgcamd. Most channels I try decodes, but some freeze occationally. Restart the camd puts it back on.
Have tried different settings in the conf files, but work only with mgcamd on.
When I close mgcamd and only run oscam, the channels go black.
What excactly are needed to connect to cccam server with 2 C lines and run ony with oscam ?
The dvbapi.conf makes no sense as long as I do not use own card but connects as client to cccam server.
Now it seems that Mgcamd is the controller.
I have made conf files with oscam config generator and have not
selected mgcamd. Most channels I try decodes, but some freeze occationally. Restart the camd puts it back on.
Have tried different settings in the conf files, but work only with mgcamd on.
When I close mgcamd and only run oscam, the channels go black.
What excactly are needed to connect to cccam server with 2 C lines and run ony with oscam ?
The dvbapi.conf makes no sense as long as I do not use own card but connects as client to cccam server.
Now it seems that Mgcamd is the controller.
try to post your configurations
all oscam files.(mask / hide only your server
ie
oscam.server
oscam.conf
oscam.user
oscam.dvbapi