Oscam configuration for Fransat

M

MichelVn

Registered
Messages
7
Hello,

I'm putting my Vu+ Solo2 back into service with the OpenPli image.
I want to switch to Fransat, my satellite dish is correctly oriented and the image is installed.
And I've ordered my Fransat card and module (but haven't received them yet).
But I think the module won't help me, is that the case? Do I have to go via Oscam?

It's been years since I've handled or installed this and I'm not young anymore.

In the plugins/softcam available from the OpenPli image, I see two oscam: 10671 and oscam.emu 10673.
I installed the first: 10671
Then in /etc/tuxbox/config/oscam I have 6 :
oscam.conf
oscam.dvbapi
oscam.provid
oscam.server
oscam.srvid
oscam.user

in /etc/init.d I have the file: softcam.oscam
in /usr/bin I have the file oscam in attribute 755

I don't have oscam.services file (and I don't know which folder to look for/put it in). Is this normal?
Could you tell me how to configure them?
Thanks in advance

Michel
 
manaman

manaman

Donating Member
Messages
225
[reader]
label = FRANSAT-1_PC7
enable = 0
protocol = internal
device = /dev/sci0
pincode = 2468
smargopatch = 1
caid = 0500
detect = cd
mhz = 450
cardmhz = 2700
ident = 0500:041950,041960,041970,8000FFF0
aeskeys = 0500@041950:BFB57F9F75D3430E0C047607D620CA44;0500@041960:BFB57F9F75D3430E0C047607D620CA44;0500@041970:BFB57F9F75D3430E0C047607D620CA44;0500@041980:BFB57F9F75D3430E0C047607D620CA44;0500@00FFF0:BFB57F9F75D3430E0C047607D620CA44
group = 10
emmcache = 1,1,31,0
dropbadcws = 1
disablecrccws = 1
auprovid = 041960
 
M

MichelVn

Registered
Messages
7
manaman said:
[reader]
label = FRANSAT-1_PC7
enable = 0
protocol = internal
device = /dev/sci0
pincode = 2468
smargopatch = 1
caid = 0500
detect = cd
mhz = 450
cardmhz = 2700
ident = 0500:041950,041960,041970,8000FFF0
aeskeys = 0500@041950:BFB57F9F75D3430E0C047607D620CA44;0500@041960:BFB57F9F75D3430E0C047607D620CA44;0500@041970:BFB57F9F75D3430E0C047607D620CA44;0500@041980:BFB57F9F75D3430E0C047607D620CA44;0500@00FFF0:BFB57F9F75D3430E0C047607D620CA44
group = 10
emmcache = 1,1,31,0
dropbadcws = 1
disablecrccws = 1
auprovid = 041960
Click to expand...
Thanks Manaman.

Should I put this in the oscam.server file?
And do I need to modify the other files?

Regards
Michel
 
manaman

manaman

Donating Member
Messages
225
MichelVn said:
Thanks Manaman.

Should I put this in the oscam.server file?
And do I need to modify the other files?

Regards
Michel
Click to expand...
I just put this command in Oscam and it worked for me
But it must be activated from Readers i Oscam
 
M

MichelVn

Registered
Messages
7
manaman said:
I just put this command in Oscam and it worked for me
But it must be activated from Readers i Oscam
Click to expand...
When you write "I just put this command in Oscam and ...",
in which file did you put ? I have 6 files in /etc/tuxbox/config/oscam :
oscam.conf​
oscam.dvbapi​
oscam.provid​
oscam.server​
oscam.srvid​
oscam.user​

and 2 others :
softcam.oscam in /etc/init.d
oscam in /usr/bin
 
L

Lexzie

Registered
Messages
159
You put it in oscam.server and delete the line with enable = 0.
Place the smartcard in the internal reader of the settopbox.
Reboot OSCam.

This is what I have in oscam.server, worked until they switched off my card.
Code: 
[reader]
label                         = Fransat
protocol                      = internal
device                        = /dev/sci0
pincode                       = 2468
autospeed                     = 0
caid                          = 0500
mod1                          = F4BFC723D85D3999A047DA06BE0C6BF8DE718044723DD2D5DC43CBCBCF93EB5EEDB420E93B9663C46297F07CD2C051BBBC3C15615B9734085973E25886094E975BDE772BCF2E161C10BFB9529523DFB89A23951750A6618F5B8726F441AFAA6BFCBB80D71AE217E9BE041B8341E9FC59
data50                        = B6711C868C3EE72533A4E08C1364B83AEEFDEBE9FB54156A8776D872CBC41FF2E5EA2CBAF4F26A58C521EC53E310FC494354E49ECE6CD0F9631B724FAB0C8BAEC1F66C346AD2DB1CB3871AF44C1E1592
mod50                         = DB9E1F1BD23C6153444E444D8E6C471E162EC63C599D44F476E0D40C3840E0FDB7B63D174DD73B575543983F2F2DFB94E3644958AE642C91636A6BE55528478EB7A422479598C68E6F1FC9D647BBC4D5
detect                        = cd
detect_seca_nagra_tunneled_card= 0
mhz                           = 450
cardmhz                       = 2700
ident                         = 0500:041950,041960,041970,041980,0419A0,FFF400
aeskeys                       = 0500@023A20:BFB57F9F75D3430E0C047607D620CA44;0500@032920:BFB57F9F75D3430E0C047607D620CA44;0500@041900:BFB57F9F75D3430E0C047607D620CA44;0500@041910:BFB57F9F75D3430E0C047607D620CA44;0500@041920:BFB57F9F75D3430E0C047607D620CA44;0500@041930:BFB57F9F75D3430E0C047607D620CA44;0500@041950:BFB57F9F75D3430E0C047607D620CA44;0500@041960:BFB57F9F75D3430E0C047607D620CA44;0500@041970:BFB57F9F75D3430E0C047607D620CA44;0500@041980:BFB57F9F75D3430E0C047607D620CA44;0500@0419A0:BFB57F9F75D3430E0C047607D620CA44;0500@0419B0:BFB57F9F75D3430E0C047607D620CA44;0500@0419C0:BFB57F9F75D3430E0C047607D620CA44;0500@0419D0:BFB57F9F75D3430E0C047607D620CA44;0500@042800:BFB57F9F75D3430E0C047607D620CA44;0500@042820:BFB57F9F75D3430E0C047607D620CA44
group                         = 1
emmcache                      = 1,1,31,0
blockemm-unknown              = 1
auprovid                      = FFF400

So you see I have some extra lines: mod1, data50 and mod50. Try with and without them.

Furthermore I don't have:
smargopatch = 1 # I think this is only for Smargo readers, not needed when your card is in the internal reader of the settopbox.

dropbadcws = 1
disablecrccws = 1
Don't know if they are needed in with the current Fransat-cards. Try it with and without them.
 
M

MichelVn

Registered
Messages
7
Lexzie said:
You put it in oscam.server and delete the line with enable = 0.
Place the smartcard in the internal reader of the settopbox.
Reboot OSCam.

This is what I have in oscam.server, worked until they switched off my card.
Code: 
[reader]
label                         = Fransat
protocol                      = internal
device                        = /dev/sci0
pincode                       = 2468
autospeed                     = 0
caid                          = 0500
mod1                          = F4BFC723D85D3999A047DA06BE0C6BF8DE718044723DD2D5DC43CBCBCF93EB5EEDB420E93B9663C46297F07CD2C051BBBC3C15615B9734085973E25886094E975BDE772BCF2E161C10BFB9529523DFB89A23951750A6618F5B8726F441AFAA6BFCBB80D71AE217E9BE041B8341E9FC59
data50                        = B6711C868C3EE72533A4E08C1364B83AEEFDEBE9FB54156A8776D872CBC41FF2E5EA2CBAF4F26A58C521EC53E310FC494354E49ECE6CD0F9631B724FAB0C8BAEC1F66C346AD2DB1CB3871AF44C1E1592
mod50                         = DB9E1F1BD23C6153444E444D8E6C471E162EC63C599D44F476E0D40C3840E0FDB7B63D174DD73B575543983F2F2DFB94E3644958AE642C91636A6BE55528478EB7A422479598C68E6F1FC9D647BBC4D5
detect                        = cd
detect_seca_nagra_tunneled_card= 0
mhz                           = 450
cardmhz                       = 2700
ident                         = 0500:041950,041960,041970,041980,0419A0,FFF400
aeskeys                       = 0500@023A20:BFB57F9F75D3430E0C047607D620CA44;0500@032920:BFB57F9F75D3430E0C047607D620CA44;0500@041900:BFB57F9F75D3430E0C047607D620CA44;0500@041910:BFB57F9F75D3430E0C047607D620CA44;0500@041920:BFB57F9F75D3430E0C047607D620CA44;0500@041930:BFB57F9F75D3430E0C047607D620CA44;0500@041950:BFB57F9F75D3430E0C047607D620CA44;0500@041960:BFB57F9F75D3430E0C047607D620CA44;0500@041970:BFB57F9F75D3430E0C047607D620CA44;0500@041980:BFB57F9F75D3430E0C047607D620CA44;0500@0419A0:BFB57F9F75D3430E0C047607D620CA44;0500@0419B0:BFB57F9F75D3430E0C047607D620CA44;0500@0419C0:BFB57F9F75D3430E0C047607D620CA44;0500@0419D0:BFB57F9F75D3430E0C047607D620CA44;0500@042800:BFB57F9F75D3430E0C047607D620CA44;0500@042820:BFB57F9F75D3430E0C047607D620CA44
group                         = 1
emmcache                      = 1,1,31,0
blockemm-unknown              = 1
auprovid                      = FFF400

So you see I have some extra lines: mod1, data50 and mod50. Try with and without them.

Furthermore I don't have:
smargopatch = 1 # I think this is only for Smargo readers, not needed when your card is in the internal reader of the settopbox.

dropbadcws = 1
disablecrccws = 1
Don't know if they are needed in with the current Fransat-cards. Try it with and without them.
Click to expand...
Thanks to your input. I've made some progress but not enough.
Can the log help someone to made futher progress :
  • 2024/05/04 11:19:55 00000000 s (main) Host name = vusolo2
  • 2024/05/04 11:19:55 00000000 s (main) Release = 3.13.5
  • 2024/05/04 11:19:55 00000000 s (main) Version = #1 SMP Mon Aug 7 05:19:36 UTC 2023
  • 2024/05/04 11:19:55 00000000 s (main) Machine = mips
  • 2024/05/04 11:19:55 00000000 s (main) Stb model = dm8000
  • 2024/05/04 11:19:55 00000000 s (main) Stb vumodel = vusolo2
  • 2024/05/04 11:19:55 00000000 s (main) Stb boxtype = vusolo2
  • 2024/05/04 11:19:55 00000000 s (main) creating pidfile /tmp/oscam.pid with pid 3425
  • 2024/05/04 11:19:55 00000000 s (aes) 1 AES key(s) added on reader Fransat for 0500@023a20
  • 2024/05/04 11:19:55 00000000 s (aes) 1 AES key(s) added on reader Fransat for 0500@032920
  • 2024/05/04 11:19:55 00000000 s (aes) 1 AES key(s) added on reader Fransat for 0500@041900
  • 2024/05/04 11:19:55 00000000 s (aes) 1 AES key(s) added on reader Fransat for 0500@041910
  • 2024/05/04 11:19:55 00000000 s (aes) 1 AES key(s) added on reader Fransat for 0500@041920
  • 2024/05/04 11:19:55 00000000 s (aes) 1 AES key(s) added on reader Fransat for 0500@041930
  • 2024/05/04 11:19:55 00000000 s (aes) 1 AES key(s) added on reader Fransat for 0500@041950
  • 2024/05/04 11:19:55 00000000 s (aes) 1 AES key(s) added on reader Fransat for 0500@041960
  • 2024/05/04 11:19:55 00000000 s (aes) 1 AES key(s) added on reader Fransat for 0500@041970
  • 2024/05/04 11:19:55 00000000 s (aes) 1 AES key(s) added on reader Fransat for 0500@041980
  • 2024/05/04 11:19:55 00000000 s (aes) 1 AES key(s) added on reader Fransat for 0500@0419a0
  • 2024/05/04 11:19:55 00000000 s (aes) 1 AES key(s) added on reader Fransat for 0500@0419b0
  • 2024/05/04 11:19:55 00000000 s (aes) 1 AES key(s) added on reader Fransat for 0500@0419c0
  • 2024/05/04 11:19:55 00000000 s (aes) 1 AES key(s) added on reader Fransat for 0500@0419d0
  • 2024/05/04 11:19:55 00000000 s (aes) 1 AES key(s) added on reader Fransat for 0500@042800
  • 2024/05/04 11:19:55 00000000 s (aes) 1 AES key(s) added on reader Fransat for 0500@042820
  • 2024/05/04 11:19:55 00000000 s (aes) 1 AES key(s) added on reader Fransat for 0500@00fff0
  • 2024/05/04 11:19:55 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
  • 2024/05/04 11:19:55 00000000 s (main) signal handling initialized
  • 2024/05/04 11:19:55 00000000 s (config) 10 provid's loaded
  • 2024/05/04 11:19:55 00000000 s (config) 164 service-id's loaded in 2 ms
  • 2024/05/04 11:19:55 00000000 s (net) cs378x: initialized (fd=4, port=12005)
  • 2024/05/04 11:19:55 00000000 s (reader) Fransat [internal] creating thread for device /dev/sci0
  • 2024/05/04 11:19:55 00000000 s (main) waiting for local card init
  • 2024/05/04 11:19:55 51710A21 r (reader) Fransat [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
  • 2024/05/04 11:19:55 51710A21 r (reader) Fransat [internal] Reader sci internal, detected box type: vusolo2
  • 2024/05/04 11:19:55 17399AD9 h (webif) webif: decompressed 193496 bytes back into 418152 bytes
  • 2024/05/04 11:19:55 17399AD9 h (webif) HTTP Server running. ip=:: port=8081
  • 2024/05/04 11:19:56 51710A21 r (reader) Fransat [internal] card detected
  • 2024/05/04 11:19:56 51710A21 r (reader) Fransat [internal] ATR: 00 00
  • 2024/05/04 11:19:56 51710A21 r (reader) Fransat [internal] ERROR: Could not read reader->convention
  • 2024/05/04 11:19:56 51710A21 r (reader) Fransat [internal] Error activating card.
  • 2024/05/04 11:19:57 51710A21 r (reader) Fransat [internal] ATR: 00 00
  • 2024/05/04 11:19:57 51710A21 r (reader) Fransat [internal] ERROR: Could not read reader->convention
  • 2024/05/04 11:19:57 51710A21 r (reader) Fransat [internal] Error activating card.
  • 2024/05/04 11:19:58 51710A21 r (reader) Fransat [internal] ATR: 00 00
  • 2024/05/04 11:19:58 51710A21 r (reader) Fransat [internal] ERROR: Could not read reader->convention
  • 2024/05/04 11:19:58 51710A21 r (reader) Fransat [internal] Error activating card.
  • 2024/05/04 11:19:58 51710A21 r (reader) Fransat [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1
  • 2024/05/04 11:19:58 51710A21 r (reader) Fransat [internal] card initializing error
  • 2024/05/04 11:19:59 00000000 s (main) init for all local cards done
  • 2024/05/04 11:19:59 00000000 s (emmcache) loaded 0 emmcache records from /etc/tuxbox/config/oscam/oscam.emmcache in 0 ms
  • 2024/05/04 11:19:59 00000000 s (emmcache) loaded 0 emmstat records from /etc/tuxbox/config/oscam/oscam.emmstat in 0 ms
  • 2024/05/04 11:19:59 00000000 s (gbox) local gbox failed init
  • 2024/05/04 11:19:59 00000000 s (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum number of filters is 64 (oscam limit is 64)
  • 2024/05/04 11:19:59 6E579C0B c (client) plain dvbapi-client granted (dvbapiau, au=auto (1 reader))
  • 2024/05/04 11:19:59 6E579C0B c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam/oscam.ccache
  • 2024/05/04 11:19:59 6E579C0B c (dvbapi) Detected /dev/dvb/adapter0/ca0 device, total available descramblers: 16
  • 2024/05/04 11:19:59 6E579C0B c (dvbapi) PMT mode 6: Connecting to enigma CA PMT listen socket...
  • 2024/05/04 11:19:59 6E579C0B c (dvbapi) PMT mode 6: Successfully connected to CA PMT server (fd 10)
  • 2024/05/04 11:19:59 6E579C0B c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0500 ECM_PID: 1C94 PROVID: 0419A0
  • 2024/05/04 11:19:59 6E579C0B c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0500 ECM_PID: 1C93 PROVID: 041950
  • 2024/05/04 11:19:59 6E579C0B c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0500 ECM_PID: 1C97 PROVID: 042820
  • 2024/05/04 11:19:59 6E579C0B c (dvbapi) Demuxer 0 ecmpid 3 CAID: 0500 ECM_PID: 1C95 PROVID: 041C00
  • 2024/05/04 11:19:59 6E579C0B c (dvbapi) Demuxer 0 found 4 ECM pids and 8 STREAM pids in CA PMT
  • 2024/05/04 11:19:59 6E579C0B c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
  • 2024/05/04 11:20:04 6E579C0B c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching re
Click to expand...
 
You must log in or register to reply here.
Top