OSCam and CD nordic

Dreamclubdk

Registered
Messages
18
Can anybody help with a problem?
Oscam says rejected group (0 ms) (no matching reader)
in my server, and i see nothing under readers, is there any log i can post to get some help here?
 

Dreamclubdk

Registered
Messages
18
Follow up

Here is a log file from status


2018/02/20 06:27:45 00000000 s **** OSCam << cardserver log switched, version 1.20-unstable_svn, build r10998 (mipsel-oe-linux)
2018/02/20 06:27:45 00000000 s (main) System name = Linux
2018/02/20 06:27:45 00000000 s (main) Host name = dm800se
2018/02/20 06:27:45 00000000 s (main) Release = 3.2-dm800se
2018/02/20 06:27:45 00000000 s (main) Version = #1 SMP Fri Oct 2 15:05:44 CEST 2015
2018/02/20 06:27:45 00000000 s (main) Machine = mips
2018/02/20 06:27:45 00000000 s (main) Stb model = dm800se
2018/02/20 06:27:45 00000000 s (main) creating pidfile /tmp/oscam.pid with pid 470
2018/02/20 06:27:45 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2018/02/20 06:27:45 00000000 s (main) signal handling initialized
2018/02/20 06:27:45 00000000 s (config) 10 provid's loaded
2018/02/20 06:27:45 00000000 s (net) newcamd: initialized (fd=4, port=34000)
2018/02/20 06:27:45 00000000 s (net) -> CAID: 0B00 PROVID: 000000
2018/02/20 06:27:45 00000000 s (reader) CanalD [internal] creating thread for device /dev/sci0
2018/02/20 06:27:45 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2018/02/20 06:27:45 00000000 s (main) waiting for local card init
2018/02/20 06:27:45 022CFECA r (reader) CanalD [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz)
2018/02/20 06:27:45 022CFECA r (reader) CanalD [internal] Reader sci internal, detected box type: dm800se
2018/02/20 06:27:45 4C104200 h (webif) webif: decompressed 164383 bytes back into 392952 bytes
2018/02/20 06:27:45 4C104200 h (webif) HTTP Server running. ip=0.0.0.0 port=83
2018/02/20 06:27:47 00000000 s (main) init for all local cards done
2018/02/20 06:27:47 00000000 s (anticasc) anti cascading disabled

In status window reader says No Data and No Entitlements

And in live log i keep getting
rejected group (0 ms) (no matching reader)

Why??????
 

boyet05

Senior Member
Messages
246
Your card is not read properly. . . .
try set proper card clock speed.
Its then try 357, 368 or 480mhz
 

Dreamclubdk

Registered
Messages
18
Oscam server file

This is my oscam.server

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r10998
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.server.txt



[reader]
Label = CanalD
Protocol = internal
Detect = cd
Device = /dev/sci0
EMMCache = 1,3,2
Group = 1
CAID = 0B00
ident = 0B00:000000,006010,006020,006030,006040,006050,006060,006070,006080
ecmwhitelist = 0B00@000000:56,5B,68
blockemm-g = 1
blockemm-unknown = 1
 

Dreamclubdk

Registered
Messages
18
Card Mhz

I dont get it.
I cannot change Card Mhz, every time i restart Oscam, it reverts back to 2700.

An other this is that the configs are supposed to be in ConfigDir: /etc/tuxbox/config/oscam/
But in the oscam.user there is only one and that is Oscam_user, were are the two users i can see in WebIf???????

It is like it has two config files, one i can see, and one i cant.
And under status window, the two server entryes both say 0000:0000@000000 under SRVID:CAID@PROVID

Uhhh????
 
Last edited:

Puppesan

Donating Member
Messages
12
ATR baudrate detection works like this:
when the card reader gets the first bit from the card
the reader measures the time of the bit using 27.00 Mhz as clock frq.
and from that determines the correct card clock frq.
3.57 Mhz for conax.
 
Top