OpenBox S9 HD Receiver.

LilleMama

Registered
Messages
283
openbox-s9-hd-pvr_1.jpg

openbox-s9-hd-pvr_5.jpg

The Openbox S9 HD PVR C/Ku FTA Receiver.

The lowest priced High Definition (HD) Receiver on the market today.
Replaces the Solomend 800 HD.
The Openbox is fully DVB-S/DVB-S2, MPEG-2/MPEG4 compliant, and features quick and accurate hardware-driven Blind Scan and AC3 audio.
The Openbox S9 HD is also PVR ready to record your favorite programs or for time-shifting*. (*external hard drive required, not included.) Ships with a power supply for use in the USA or for Europe. New and Improved




OPENBOX S9 HD PVR receiver main features

  • This receiver has all the functions of dreambox ; It is the cheapest HD receiver; Can be used around the world;
  • Linux Operative System ; HD CPU;Available tuners: DVB-S2;
  • Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech, selectable--and Language can be increased in the future
OPENBOX S9 HD PVR receiver General Specifications:

*Receive Digital High Definition (HD) and Standard Definition (SD) Satellite Signal
*Supports DVB-S, DVB-S2, MPEG-2 & MPEG-4 (does not support 4:2:2 video)
*Digital Video Recorder through USB (external flash or hard drive not included)
*Worldwide compatible
*Hardware Blind Search DVB-S and DVB-S2
*STB main IC solution is ALI , demodulator model is M3501 from Ali
*HD DVB-S2 SHARP 7306 Tuner
*Multilingual support on screen menu (OSD):
*300 MHz MIPS Processor - Linux OS
*Chipset: Ali3602
*Fully compliant MPEG-4 H.264/AVC Main Profile Level 3 & High Profile Level 4.1;
*Fully compliant MPEG-2 MP@HL & MP@ML;
*Fully compliant MPEG-1 Layer I & II & III,
*Dolby Digital Audio(AC3)
*SCPC & MCPC receivable from C/Ku band satellites
*Multiple LNB-Switching control (supports DiSEqC1.0/1.1/unicable)
*Motor Support: DiSEqC 1.2/1.3 (USALS - GoTo X)
*HDMI 1.3 output (HDMI cable not included)
*PVR (store on USB external disk)
*Multimedia files playback (by USB);
*7 Days Electronic Program Guide (EPG)
*Teletext and subtitle out through OSD
*Multi-lingual DVB subtitle and teletext
*Automatic and Manual Channel Scan, Automatic Service Scan
*NIT search, Hardware BLIND SEARCH
*Fast channel switching < 1 second
*OSD in many languages and skin-support
*Multilingual support on screen menu (OSD)
*Multiple display mode: 1080i/720p/570p/576i/480p;
*Videotext Decoder
*Analog RCA audio output: stereo (L+R);
*Digital audio output: S/PDIF by coaxial
*S/PDIF Interface for digital bit stream out (AC-3)
*YCbCr Component Video Output
*2 x Scart (RGB, FBAS or S-Video)
*Screen format: Auto, 4:3, and 16:9;
*Upgrade software through USB2.0 port
*Powerful user interface program management function, parent lock
*1x CI built-in
*1x CA (smartcard reader) built-in
*10/100Mbit Ethernet Interface
*US or Europe Power Cord (please specify when ordering)


DVB-S2
Input Frequency:950~2150MHz
Loop Out Frequency:950~2150MHz
Input Level:-65~-25dBm
Input Impedance:75
LNB Power: Auto/14v/18v/OFF, Imax = 500mA​

Video decoder
Video Compression MPEG-2 and MPEG-1 compatible, H.246
Video Formats 4:3 / 16:9
Letterbox for 4:3 TV-Device​

Audio decoder
Audio Compression MPEG-1 & MPEG-2 Layer I and II, MP3
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz​

Output digital
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical, Toslink​

Video parameter
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard​

TV-Scart
Output: FBAS, RGB, S-Video
Serielle Interface RS 232
Typ RS232 bidirectional
Bit rate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function: Update of Firmware​

Ethernet
10/100 MBit compatible interface
Function: Update of Firmware​

USB
1 x USB 2.0 Host ,PVR
LNB power and polarisation per tuner
LNB Current 500mA max.; short-circuit-protected
LNB Voltage vertical < 14V no load, > 11,5V at 400mA
LNB Voltage horizontal < 20V no load, > 17.3V at 400mA
Count of active satellite position
DiSEqC 1.0/1.1/unicable/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control
External PSU
Input:110-240V AC / 50-60Hz / 0.6A
Output: 12V = / 3,0A​

Physical specification
Ambient Temperature +15°C ~ +35°C
Humidity < 80%
Size (W x D x H): 300 mm x 220 mm x 56 mm
Weight: 1,8 kg?without HDD


Power
AC input range:100-240VAC 50/60Hz
PowerConsumption (Standby): Max. 10W (<1W)
 

LilleMama

Registered
Messages
283
For those of you who for one reason or another, are experiancing difficulties adding clines, I have put together this basic tutorial showing how to add clines.

First download the attached test cccam.cfg file at the bottom of this page.
Once unzipped open the file and overwrite the test clines with your own active clines, then save the changes.

Now add the cccam.cfg file to a USB Stick, do not zip the file, add it as is.
Then place the USB Stick that contains the cccam.cfg file, into the USB connector at the rear of the receiver.

Now goto Menu -> Network Local Settings and select CCcam Plug Setting and click the OK button.


Now select Update Files by USB and click the OK button.


Now select CCcam,cfg [CCcam Plug] and click the OK button, you should then see a check mark or tick appear, indicating you have selected the file, if there is no tick shown, then you have not selected anything, and nothing will be installed.


If there is no tick displayed, select CCcam,cfg [CCcam Plug] and click the OK button.


Once the tick is displayed, click the Yellow button.
Now select CCcam Plug Setting and click the OK button.


Now select option 1 .. CCcam.cfg and click the OK button.


Now highlight each cline you wish to activate, by clicking the OK button, a tick will appear next to each cline you have activated.


Finally check your Network Settings are configured correctly.


If your router supports DHCP turn it ON and click Apply.
If your router do not support DHCP you will be required to set it up manually, click Apply once you have set it up correctly.


Now reboot your receiver, and if all is okay, you may start viewing channels.

The pictures is remove due to link to another forum . ( Thanks to laurels53 for original post )
 
Top