Openbox S9 Chat

J

just4fun2

Registered
Messages
361
marjanen said:
Have to say that these new firmwares aren´t as good as the older one I´m using.
It´s just that the new "europe" version is so damn slow!
It response to my remote with a long delay and it is annoying.
I´m using "CHDS2_CMT_110404047A.abs" for now to wait the "faster" one!
And I haven´t found any real update and I´m using it daily.
My Openbox works beautiful allready. No booting or what so ever on any channel.

And about the records. ´cos the new firmware uses different format you will lose all your recordings when "upgrading" to new firmware. It won´t read the old ones you record with any older firmware. that´s a pity...
Click to expand...

Hi, i don´t know if your version is faster but for shure with more bugs than the last:( i tryed right now, pb with reboot(maybe my channels are newer made??) & my dish won´t turn(i writed my location as usual E/N)so i changed again to my dump from yesterday & my favorite channels:) with your old SW i could´nt acces with " stb lan" ?? we can with the last.
Maybe these STB are a little different fron one to another & could explain at one have no pb & the other have :confused:
But for the price it is OK & the picture/dolby sound is not bad. i have a vu+duo & Ipbox 9000 & i cann´t see a big difference eccept the plugins & the price:D
 
I

iraj3

Registered
Messages
7
usb movie(dvd/avi) file openbox s10

HI
I don't know how to play movie file frome usb on skybox s10
I have a movie file(avi)on usb,when I go to menu/media,I coulden't see the avi file to play it,
can anyone help me
regard
 
S

stewiebee

Registered
Messages
42
I have s10 original and was very underwhelmed with openbox.The epg is rubbish worst ever.It shows scrambled on unscrambled channels for a while,there is no 7 day guide just now and next..I eventually put it upstairs and bought a dreambox dm800 much much better reciever.Crossepg or cool guide is good.The moral of the story is you get what you pay for and this is very much a budget reciever with budget qualities.
 
J

just4fun2

Registered
Messages
361
stewiebee said:
I have s10 original and was very underwhelmed with openbox.The epg is rubbish worst ever.It shows scrambled on unscrambled channels for a while,there is no 7 day guide just now and next..I eventually put it upstairs and bought a dreambox dm800 much much better reciever.Crossepg or cool guide is good.The moral of the story is you get what you pay for and this is very much a budget reciever with budget qualities.
Click to expand...

If it is the only one you have & will play a liitle bit..bought the DM800HD, the clone is also ok:) The openbox is made for who will have CS ..Power on & off, it is not an Rolls:D
 
P

poorboy

Registered
Messages
9
s10 and softcam

I have no problem loading softcam but cannot load constant.cw. When I check to see if its loaded, nothing there. Any help please.
 
A

aandreou2

Registered
Messages
2
open box s9 clone

i am having an openbox s9 clone.
I am using mgcamd sharing. I cant find a way to intall the mg.cfg
and the priority.list. as a result the channals take to much time to open. Any ideas what to do? Where can i find the latest firmware for clone to install? Is there a good tutorial to solve my problem?
thanks
 
G

gkamal

Registered
Messages
113
experts and friends, this box can play the N*S cards? if yes, whats the proceeder for that..cozed the box asking VIDEO****2 BOX ID!
thanks in advance!
regards
 
H

HackTheNet

Registered
Messages
71
Solomend HD-PVR800

What are the files: smartcard.conf, and ignore.list newcamd.list?
Can you post me because sometimes feetige files, what's in there?
What can I insert cccam.cfg there, you can give me as well once a final example, there is the Cccam 2.2.1?
 
G

gkamal

Registered
Messages
113
HackTheNet said:
What are the files: smartcard.conf, and ignore.list newcamd.list?
Can you post me because sometimes feetige files, what's in there?
What can I insert cccam.cfg there, you can give me as well once a final example, there is the Cccam 2.2.1?
Click to expand...
really i confused as how i can sure about that it has the Cccam 2.2.1 inside? and i m talking about smartcard.conf only and when i click the smart card config , it asking BOX ID for my card
and i m using the latest firmware also tried several versions of later firmwares, but all is need BOX ID for VIDEO***RD2!., by simple, what should i do or i need to play my card in OPENBOX S9?
by the way, thank u very much for ur reply!
thanks and regards!
 
M

mdt

VIP
Messages
905
gkamal said:
really i confused as how i can sure about that it has the Cccam 2.2.1 inside? and i m talking about smartcard.conf only and when i click the smart card config , it asking BOX ID for my card
and i m using the latest firmware also tried several versions of later firmwares, but all is need BOX ID for VIDEO***RD2!., by simple, what should i do or i need to play my card in OPENBOX S9?
by the way, thank u very much for ur reply!
thanks and regards!
Click to expand...


most if not all videoguard cards are married to the official stb so you need the box key from your official stb. regards mdt
 
G

gkamal

Registered
Messages
113
thanks for the reply, and any body can help me find out the box from my box? as my box having 11 digits number only in menu but the open box needs only 8 digits... :s
mdt said:
most if not all videoguard cards are married to the official stb so you need the box key from your official stb. regards mdt
Click to expand...
 
H

HackTheNet

Registered
Messages
71
raul7 said:
Openbox S9 and s10 work with dongle ??

port serie twin protocol?

thanks
Click to expand...

2011591714178524G8WO4.jpg

20110425145634800ND1M7.jpg


DONGLE S-BOX Y4 (TWIN) PROTOCOL W3 SERVER

Code: 
Main Features:

Y4(twin)protocol in W3 server
1. Transmission standards
 

Item
	
Specification
"Connector
	
1 x F-Type, IEC 169-24

 
 
2. Tuner/LNB input (DVB-S)

Item
	
Specification
"Connector
	
1 x F-Type, IEC 169-24
Input frequency
	
950-2150MHz
Max Current
	
500mA max
Supply Voltage
	
13V/18V
DiSEqC
	
1.0, 1.2 and 2.0
22KHz Tone
	
"Frequency : 22 +-2KHz, Amplitude : 0.6 +-0.2 V 75 ohm"

 
 
3． Demodulator (DVB-S)
 
 
Item
	
Specification
Waveform
	
QPSK decoding in accordance ETS300 421
Symbol rate
	
2-45MS/s
FEC Decoder
	
Convolution Code Rate 1/2, 2/3, 3/4, 5/6 and 7/8
 
 
4．Video Decoder

 
	
Item
	
Specification
MPEG-2 Ma
	
in Profile @ Main Level
Date rates
	
Up to 15Mbit/s

 
 
 
5. Audio Decoder

Item
	
Specification
MPEG-1 Layer 1&2,
	
Mp3
Dolby Digital
	
 
Stereo ,Mono ,Dual
	
Channel , joint  Stereo

 
 
6. System resources

Item
	
Specification
Processor
	
216MHz
SDRAM
	
8MBytes
Flash ROM
	
2MBytes
Resolution
	
720X576 / 720X480 pixels
OSD
	
65, 536 colors
Click to expand...
 
You must log in or register to reply here.
Top