Official Firmware for UFS 912

[juli13]

04.05.2010

Original firmware UFS 912 sw2.00-beta

2 ChangeLog (Änderungsprotokoll)
■ Mediacenter, Aufnahme-Archiv, EPG, Programmliste: Optische bzw. funktionale Anpassungen
■ Mediacenter: YouTube integriert
■ EPG: Erweiterung um YouTube-Suchfunktion ( Aufruf durch TXT-Taste) – Suche nach Titel, Schauspieler, in Detailinformation, Volltextsuche)
■ Teletext – Sonderzeichen-Problem in Farbleiste behoben
■ Programmliste per Service-Menü auf USB-Gerät speichern  wird jetzt direkt in Ordner „kathrein/ufs912“ kopiert
■ Problem bei Aufnahmen von Regionalfenstern behoben
■ Netzwerk-Interface erweitert
o Aufnahmen streamen
o Aufnahmen speichern (Speichern unter…)
■ Festplatten-Kapazitätsüberprüfung bei Receiver-Start (wenn weniger als 5% frei, dann erfolgt Warnmeldung)
■ Nach Schließen des Teletext wird Infobanner nicht mehr geöffnet
■ JPG-Wiedergabe: Einzelbildwiedergabe nun möglich, dazu muss bei Wiedergabe-Optionen ( OPT-Taste „manuell“ gewählt werden), mit Pfeiltasten oder P+/P- Tasten kann zum nächsten Bild weitergeschaltet werden
■ 4 GB Problem bei Video-Wiedergabe über UPnP behoben

 

[juli13]

16.07.2010

[B]Original firmware UFS 912 sw2.00 [COLOR="Red"]rc[/COLOR][/B]

 

[juli13]

30.07.2010

Original firmware UFS 912 sw2.00 rc2

If you have made all the settings for updating your receiver, go to the
Checkbox "Start Update" and press the button. The receiver begins automatically
of updating the components you selected earlier.
Main Menu - Service Menu
Follow any on-screen Advertisement!
Check for a software update, the time setting!
The updates can also get on the Internet. The address is:

You fi nd the software under the "Service" "Software and Download" "receiver"
"UFS 912"
This update, you can also use the USB ports of the receiver
(See perform "service menu", "update via USB" or "operation of
The Front Page ")
After completion of updating the settings are initialized and is running again.
Turn off the receiver during the update process in any case from, or you the
All software lose. This must be new in a workshop or via PC and network cable
be installed. In the service menu you can see if the new software has been installed.

 

[juli13]

11.08.2010

Original firmware UFS 912 sw2.00 Final release

If you have made all the settings for updating your receiver, go to the
Checkbox "Start Update" and press the button. The receiver begins automatically
of updating the components you selected earlier.
Main Menu - Service Menu
Follow any on-screen Advertisement!
Check for a software update, the time setting!
The updates can also get on the Internet. The address is:

You fi nd the software under the "Service" "Software and Download" "receiver"
"UFS 912"
This update, you can also use the USB ports of the receiver
(See perform "service menu", "update via USB" or "operation of
The Front Page ")
After completion of updating the settings are initialized and is running again.
Turn off the receiver during the update process in any case from, or you the
All software lose. This must be new in a workshop or via PC and network cable
be installed. In the service menu you can see if the new software has been installed.

 

[juli13]

Original firmware UFS 912 sw2.01 release

If you have made all the settings for updating your receiver, go to the
Checkbox "Start Update" and press the button. The receiver begins automatically
of updating the components you selected earlier.
Main Menu - Service Menu
Follow any on-screen Advertisement!
Check for a software update, the time setting!
The updates can also get on the Internet. The address is:

You fi nd the software under the "Service" "Software and Download" "receiver"
"UFS 912"
This update, you can also use the USB ports of the receiver
(See perform "service menu", "update via USB" or "operation of
The Front Page ")
After completion of updating the settings are initialized and is running again.
Turn off the receiver during the update process in any case from, or you the
All software lose. This must be new in a workshop or via PC and network cable
be installed. In the service menu you can see if the new software has been installed.

 

[juli13]

26/11/2010

UFS 912_sw2.01-b26

If you have made all the settings for updating your receiver, go to the
Checkbox "Start Update" and press the button. The receiver begins automatically
of updating the components you selected earlier.
Main Menu - Service Menu
Follow any on-screen Advertisement!
Check for a software update, the time setting!
The updates can also get on the Internet. The address is:

You fi nd the software under the "Service" "Software and Download" "receiver"
"UFS 912"
This update, you can also use the USB ports of the receiver
(See perform "service menu", "update via USB" or "operation of
The Front Page ")
After completion of updating the settings are initialized and is running again.
Turn off the receiver during the update process in any case from, or you the
All software lose. This must be new in a workshop or via PC and network cable
be installed. In the service menu you can see if the new software has been installed.

 

[juli13]

UFS 912_sw2.02-b3

If you have made all the settings for updating your receiver, go to the
Checkbox "Start Update" and press the button. The receiver begins automatically
of updating the components you selected earlier.
Main Menu - Service Menu
Follow any on-screen Advertisement!
Check for a software update, the time setting!
The updates can also get on the Internet. The address is:

You fi nd the software under the "Service" "Software and Download" "receiver"
"UFS 912"
This update, you can also use the USB ports of the receiver
(See perform "service menu", "update via USB" or "operation of
The Front Page ")
After completion of updating the settings are initialized and is running again.
Turn off the receiver during the update process in any case from, or you the
All software lose. This must be new in a workshop or via PC and network cable
be installed. In the service menu you can see if the new software has been installed.