NEW " Vu+ Solo se" and more....

mr.strauss

Registered
Messages
8,414
NEW " Vu+ Solo se" and more....

ANGACOM 2014

We, the Vu+ Team, are delighted to invite you to attend the ANGA COM 2014 taking place from the 20th to 22nd of May at Koelnmesse (Cologne Exhibition Center) in COLOGNE, GERMANY.

• Vu+ Booth : Hall 10.1 T30

• Showcasing :

o Vu+ SOLO SE - introducing our new high-end HD Zapper

o Vu+ DUO2

o Vu+ SOLO2



SOLO SE, the successor of SOLO, one of the most popular Linux based receivers, comes with more powerful CPU (Dual Core 1.3GHz) encased in a stylish exterior design. Please participate in our giveaway event (more details will be announced on May 9th) and you may be the lucky one to get this brand new model and other Vu+ models.



We look forward to meeting you at our Vu+ booth, Hall 10.1 T30.


Sincerely,


The Vu+ TEAM
 

mr.strauss

Registered
Messages
8,414
Technische Daten für VU+® Solo SE black Full HD 1080p Linux Receiver

Digitaler Receiver für HDTV- und Radioprogramme. Hauptmerkmal ist der 1300 MHz starke Prozessor des VU+ Solo SE. Erleben Sie HighDefinition TV mit Ihrem VU+ Solo SE.

  • Transcoding Funktion
  • Opera Browse
  • HbbTV
  • HDMI 1.4 Anschluss
  • Plug&Play Tuner
  • HD PIP
  • Externes 12 V Netzteil
Technische Highlights:

  • 1300 MHz Dual Core Mips Prozessor
  • Plug&Play Tuner (DVB-S2, DVB-C/T, DVB-C/T/T2)
  • 256MB Flash
  • 1 GB DDR3 DRAM
  • 1 x DVB Common-Interface Einschub
  • 1 x Smartcard-Reader (Xcrypt)
  • 2 x USB
  • 10/100 Mbit Ethernet Interface
  • SPDIF Audio Ausgang optisch (digital)
  • 1 x HDMI 1.4 Video/Audio Ausgang (digital)
  • 1 x Video Ausgang RCA
  • 2 x Audio Ausgang (L/R) RCA (analog)
  • unlimitierte Kanalliste für TV/Radio
  • EPG (electronic program guide) Unterstützung
  • Unterstützung von Bouquet-Listen
  • OSD in vielen Sprachen und Skin-Unterstützung
  • automatischer /manueller Kanalsuchlauf
  • DiSEqC 1.0/1.1/1.2, USALS
  • Externes 12 Volt Netzteil
  • Netzschalter
VU+ Solo SE Technische Daten:

  • DVB-S2 Tuner
  • Eingangsfrequenzbereich 950...2150 MHz
  • Eingangspegelbereich - 65 dBm...- 25 dBm
  • Tuner Eingang F-Buchse
  • Eingangsimpedanz 75 Ohm
  • AFC-Fangbereich +/- 3,5 MHz
  • Demodulation QPSK und 8PSK
  • FEC Viterbi und Reed-Solomon
  • Viterbiraten 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9
  • Roll-off Factor 35 %
Common-Interface:

  • Common-Interface Stromverbrauch max. 0,35A/5V
Videodekodierung:

  • Videokompression MPEG-2 / H.264 und MPEG-1 kompatibel
  • Videostandard PAL G/ 25 Hz, NTSC
  • Bildformat 4:3 / 16:9
  • Letterbox für 4:3 TV-Geräte
Ausgang Digital:

  • Ausgangspegel 0,5 Vss an 75 Ohm
  • Abtastfrequenzen 32 kHz, 44.1 kHz, 48 kHz
  • S/PDIF-Ausgang optisch, coaxial (AC3)
Audiokodierung:

  • Audiokompression MPEG-1 & MPEG-2 Layer I und II, MP3
  • Audio Mode Dual (main/sub), Stereo
  • Abtastfrequenzen 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Ausgang Analog:

  • Ausgangspegel L/R 0,5 Vss an 600 Ohm
  • THD > 60 dB (1 kHz)
  • Übersprechen < -65 dB
Video-Parameter:

  • Eingangspegel FBAS 1 Vss +/- 0.25 dB an 75 Ohm
Ethernet:

  • 100/10 MBit kompatibles Interface
USB:

  • USB 2.0 Anschluss (2x)
LNB Stromversorgung DVB-S2 Tuner:

  • LNB Strom 400mA max. , kurzschlussfest
  • LNB Spannung horizontal "ohne Last 19,5V"17,6V bei 400mA
  • LNB Spannung vertikal "ohne Last 14,5V " 11,8V bei 400mA
  • LNB wird im Standby-Modus abgeschaltet
Steuerung der Satellitenpositionen:

  • DiSEqC 1.0/1.1/1.2 und USALS - Rotor Steuerung
Leistungsaufnahme:

  • < 13W (im Betrieb, mit LNB)
  • < 12W (im Betrieb, ohne LNB)
  • < 0,5W (Deep-Standby-Mode)
Externes Netzteil:

  • Eingang:
  • 110-240V AC / 50-60Hz / 1,0A
  • Ausgang:
  • 12V = / 3,5A
Allgemeines:

  • Umgebungstemperatur +15°C...+35°C
  • Luftfeuchtigkeit < 80%
  • Abmessungen (B x T x H): 211 mm x 185 mm x 40 mm
Lieferumfang:

  • Receiver ( VU+ Solo SE )
  • Fernbedienung
  • Batterien
  • externer IR Sensor
  • externes Netzteil
  • Bedienungsanleitung
 

anterocouto

Registered
Messages
356
Vu+ SOLO SE

ANGACOM 2014


We, the Vu+ Team, are delighted to invite you to attend the ANGA COM 2014 taking place from the 20th to 22nd of May at Koelnmesse (Cologne Exhibition Center) in COLOGNE, GERMANY.

• Vu+ Booth : Hall 10.1 T30

• Showcasing :

o Vu+ SOLO SE - introducing our new high-end HD Zapper

o Vu+ DUO2

o Vu+ SOLO2



SOLO SE, the successor of SOLO, one of the most popular Linux based receivers, comes with more powerful CPU (Dual Core 1.3GHz) encased in a stylish exterior design. Please participate in our giveaway event (more details will be announced on May 9th) and you may be the lucky one to get this brand new model and other Vu+ models.

We look forward to meeting you at our Vu+ booth, Hall 10.1 T30.

Sincerely,


The Vu+ TEAM

ONLY SUPPORT VU+ ORIGINAL
 
Top