New Clarke tech 4100

[Serafeim]

Could any owner of the receiver post some photos from the menus and write a few words about the box? Thanks in advance.

 

[kargo.25]

DVB-S2 Tuner
MPEG2/ H.264 Hardware decoding (DVB konform)
4 stelliges LED Display
1 x Common Interface Slots
1 x Smartcard-Reader (Conax Embedded)
10/100 Mbit Ethernet Interface
1 x USB2.0 (1xRückseite)
USB PVR Ready
1 x RS232
HDMI Anschluss 1.3a
1 x FBASScart
1 x S/PDIF für digitale Audioübertragung (optisch)
EPG (electronic program guide)
Media Player (JPEG, MP3, DIVX, MKV, MP4 und andere)
OSD Mehrsprachig, Skin - Unterstützung
Vollautomatischer, Manueller Kanalsuchlauf
Videotext
DiSEqC 1.o,1.1 und1.2
Unicable taugl. SaTCR, OCR
FTP Client
Fastscan
Youtube
Internetradio
Wetter Online
Spektrum Analyzer

Video Clarke Tech HD 4100

Video Auflösung 576p, 720p, 1080p Full HD
Video decoding MPEG-2, MPEG-4 compatible
Input data rate 2-45 MSymb/s

Audio Clarke Tech HD 4100

Decoding AC 3, MPEG-4 (AAC-HE), MPEG-1, Layer 1, 2 and 3
Sampling rate 32/44.1/48 kHz

Leistungsaufnahme Clarke Tech HD 4100

25W (im Betrieb, horizontal / 400mA LNB Strom)
20W (im Betrieb, ohne LNB)
1W (Deep-Standby-Mode)
Betriebssspannung: 100-240 Volt 50-60 Hz





And Video to the screen menu:HERE LONG http://www.youtube.com/watch?v=xa7DjNygrG0&feature=youtu.be

 

[antonio monasterio]

I can't fin an users manual. Do your?

 

[radigur]

Hi,
not sure, whether this is the right place to post my question.
I'm totally new to the topic and I'm looking for some sort of introduction, how emu-firmware, softcam and keys are transferred to the C-Tech 4100HD.
Is it necessary to connect the receive to a pc?
Thanks in advance,
radigur

 

[kargo.25]

Hi,
not sure, whether this is the right place to post my question.
I'm totally new to the topic and I'm looking for some sort of introduction, how emu-firmware, softcam and keys are transferred to the C-Tech 4100HD.
Is it necessary to connect the receive to a pc?
Thanks in advance,
radigur

You only need the software upload and P a suitable Softcam for the EMU!Some programs, however, are already built into the firmware and since then you need not commit additional keys. With the C-tech softcam kargo.25 you can easily create a device for daily data.

 

[radigur]

Thanks for the answer.
However, I probably need more details.
I can update the firmware via USB file-manager, right?
(--> file extension STB)
But what about the softcam (***.ipk). Does this also work via USB?

radigur

 

[kargo.25]

Thanks for the answer.
However, I probably need more details.
I can update the firmware via USB file-manager, right?
(--> file extension STB)
But what about the softcam (***.ipk). Does this also work via USB?

radigur

Yes...

 

[Serafeim]

It is a very good receiver. But it still has problems: it has freezes at some dvb-s2 8psk channels with low symbol rate and the indication of signal in db is wrong.

 

[Serafeim]

But it still has problems: it has freezes at some dvb-s2 8psk channels with low symbol rate and the indication of signal in db is wrong.

With version 1.21 the receiver shows now signal in db correctly.
Problems with dvb-s2 8psk channels with symbol rate <10000 are still here unfortunately.

 

[radigur]

Me again,
looking for a working emu/softcam combination for 9°E 12092H.
Thanks in advance.

 

[antonio monasterio]

i have just bougth the CT 4100 plus. A disaster. Even with an update the software architecture is caotic. No sat,fav, find, etc buttons. And worse, the box upload emus.softcam, but doesnt recognize them. I send the box back.

 

[Serafeim]

When problem with low symbol rate dvb-s2 8psk channels is solved, it will be just a great receiver.