try your way in yesterday still can't lock T2 channeltry
symbol_rate="08000000"
if that doesn't work also try changing
polarization="1"
Threshold must be 00000
I have used this image and this method works fine.
try your way in yesterday still can't lock T2 channeltry
symbol_rate="08000000"
if that doesn't work also try changing
polarization="1"
Threshold must be 00000
I have used this image and this method works fine.
<satellites>
<sat name="Ziggo 5555" flags="1" position="1">
<transponder frequency="01802000" symbol_rate="06875000" polarization="0" fec_inner="5" inversion="0" modulation="0" system="0"/>
<transponder frequency="01340000" symbol_rate="06875000" polarization="0" fec_inner="5" inversion="0" modulation="0" system="0"/>
</sat>
</satellites>
<satellites>
<sat name="Digitenne Wormer" flags="1" position="2">
<transponder frequency="01618000" symbol_rate="08000000" polarization="0" fec_inner="0" inversion="1" modulation="0" system="0"/>
<transponder frequency="01698000" symbol_rate="08000000" polarization="0" fec_inner="0" inversion="1" modulation="0" system="0"/>
</sat>
</satellites>
i tried your way still not help, anyway, thank youTrialTuner
inversion="0" -> DVB-C
inversion="1" -> DVB-T
fec_inner="0" -> QAM64
fec_inner="5" -> QAM256
frequency="01372000" -> frequency 372MHz
DVB-C
DVB-TCode:<satellites> <sat name="Ziggo 5555" flags="1" position="1"> <transponder frequency="01802000" symbol_rate="06875000" polarization="0" fec_inner="5" inversion="0" modulation="0" system="0"/> <transponder frequency="01340000" symbol_rate="06875000" polarization="0" fec_inner="5" inversion="0" modulation="0" system="0"/> </sat> </satellites>
I did not find anywhere BSBE2 that it also supports DVB-T2, only DVB-TCode:<satellites> <sat name="Digitenne Wormer" flags="1" position="2"> <transponder frequency="01618000" symbol_rate="08000000" polarization="0" fec_inner="0" inversion="1" modulation="0" system="0"/> <transponder frequency="01698000" symbol_rate="08000000" polarization="0" fec_inner="0" inversion="1" modulation="0" system="0"/> </sat> </satellites>
There is almost no information about the use of the BCM4505 (driver,setting,...)
can show photo of your USB DVB-T2 to me ? and where can buy it ?After all, it says DVB-T, so it's pointless to try DVB-T2
I would focus on using a USB DVB-T2 tuner that supports the old kernel used in SUNRAY