Ncam-reloaded

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,630
Ncam-reloaded

The following ipk file is the softcam `ncam-reloaded version 1.6 release 1`. It is built for: Vu+ solo4k with OpenPLi 6.
Main features: Fast zapping, web interface (on port 17001) refreshes every 15 seconds.
The config files will be installed in /etc/tuxbox/config/mohncam; in this way all your config files in /etc/tuxbox/config stay untouched.

Following is useful, but not necessary:
In case you don't see the channel name/provider in the web interface you should clean the content of ncam.srvid2. You can clean => erase the content of that file in the web interface as shown in image_2.png or go to /etc/tuxbox/config/mohncam and open that file, erase all it's content and save. it will be filled with the channel names when you zap.

tnx.carloscarlos

tested on satdreamgr 5.0 Oktagon SF4008 hk
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,630
Ncam-reloaded

Here is the version of ncam-reloaded version 1.6 release 1 for Vu+solo4k with OpenATV-6.

All the config files will be installed in /var/keys/mohncam ;
in this way all your config files in /var/keys will stay untouched.


NOTE: The port of web interface h***://your.box.ip is 8888, and there is no username, no password
 

carlos22

Registered
Messages
13
Hi

For the MIPS version, eg. vusolo2
with openATV-6 installed,
enigma2-plugin-softcams-ncam-moh-1.6r1-Reloaded_openatv_mips.zip

please get it from:

h**ps://dropapk.com/4du0mu6wrb4n

-------------------------------

carlocarlosa.
 
Last edited:

carlos22

Registered
Messages
13
Hi,

Here is the Ncam-reloaded v.1.6r1 for the MIPS architecture, eg. vusolo2. It is compiled for openATV-6 image.

Please give any feedback.
 

carlos22

Registered
Messages
13
Ncam-reloaded

Here is the Ncam-reloaded v.1.6r1 for the MIPS architecture, eg. vusolo2. It is compiled for Open Black Hole image.
vusolo2+openBH, other info inside the zip file.
File name: enigma2-plugin-softcams-ncam-moh-1.6r1-reloaded_openbh_mips.zip

Please, please give any feedback.

carloscarlosa.
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,630
Ncam-reloaded v1.7-r2 for Linux x86_x64 (64bits)

if you have VDR installed in your PC download the the config files for VDR

thanks @carloscarlosa
 

carlos22

Registered
Messages
13
Ncam-reloaded v1.7-r2 for Linux x86_x64 (64bits)

if you have VDR installed in your PC download the the config files for VDR

thanks @carloscarlosa

Please note the "user" in the config files is set with 2 maximum connections in the "ncam.user": max_connections = 2
If it does not work for you, please set to 1 ==>max_connections = 1


carloscarlosa.
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,630
Ncam-reloaded Ver.1.7 build.67 of 29 April 2018
Build for Vu+Solo4k with OpenPLI-6.
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,630
Here is build for vusolo2-mips32el with blackhole/openblackhole image:
ncam-reloaded_1.7-build-67_29apr-2018-blackhole_mips32el.

1- Zip file name: ncam-reloaded_1.7-build-67_29apr-2018-blackhole_mips32el.zip
2- The ipk file md5 checksum is as follows:
975e7d6dfea5c73b1dca71c6ab657f6b enigma2-plugin-softcams-ncam-reloaded_1.7-blackhole_mips32el.ipk
 

carlos22

Registered
Messages
13
To barney115: Deleted Message to :MadMax:.

Hi,
Regarding, Ncam-reloaded, you deleted a message that is for :MadMax:., post# 2036894906 and you said: "Reason: Advertising another forum not allowed". Well you didn't read/understand it correctly: I told :MadMax:. if he or any other member wants to upload/copy my files from that site he HAS to upload/copy the related info I put there. I maintain Ncam-reloaded and each time I upload them on that site there is some info with. Uploading a file here or elsewhere without any info is like any software without a readme/help file. I never advertise for any! Things have to be clear.
-
carloscarlosa (Ncam-reloaded maintainer
-
Now you can delete this message!
.
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,630
Βuild for VuSolo2-mips32el with OpenPLI-6 image:

1- Zip file: ncam-reloaded_vusolo2-openpli6_1.7-build.67_29april2018.zip
2- The ipk file md5 checksum is:
8127f5210e3d1870c2fe0208ef98665d enigma2-plugin-softcams-ncam-moh_1.7-moh-Reloaded_mips32el.ipk
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,630
Ncam-reloaded
V.1.8_rel.86_030618 (june 3rd, 2018) for armv7ahf-neon (running on Vu+Solo4k with OpenPLi-6)

The IPK file checksum (md5sum) is:
a51a21a15167522258fa89de3337c796 enigma2-plugin-softcams-ncam-reloaded_1.8-moh_armv7ahf-neon.ipk
Web interface port: 17001
Zip file: enigma2-plugin-softcams-ncam-reloaded_1.8-moh_armv7ahf-neon_openpli-6.zip

cyfra-discovery-science_hd_11june2018.jpg
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,630
Ncam-reloaded ver.1.8 build.86 of 03 june 2018
For mips32el architecture, e.g vusolo2, with openPLi-6 (6.1 or 6.2) image installed.

web interface port is 17001 and other info in zip file.
* The zip archive is: ncam-reloaded-1.8_03june2018_mips32el-vusolo2-openpli-6.zip
** The ipk md5 checksum is:
580e5bd57890c92d64335748f40c2456 enigma2-plugin-softcams-ncam-reloaded_1.8-moh_mips32el-openPLi-6.ipk
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,630
Ncam-reloaded-1.8 For-GNU/Linux 64bit

Ncam-reloaded ver.1.8 build-86 of 030618 (june 3rd, 2018) for x86_64
(Running on debian/Ubuntu/openSUSE).
Binary file + config files.
Info is in the zip file.
 

carlos22

Registered
Messages
13
Ncam-reloaded-1.8 for openATV & BlackHole/openBlackHole

Ncam-reloaded-1.8 for openATV & BlackHole/openBlackHole on mips32el
e.g vusolo2.
Copies are here!!! Original posts not here.

carloscarlosa.
 
Last edited:

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,630
Ncam-reloaded-1.8 for openATV & BlackHole/openBlackHole on mips32el
e.g vusolo2.


ipk file checksums:
ab26f84d35319fc07b647c82e6fd7d5b ./enigma2-plugin-softcams-ncam-reloaded_1.8_openatv_mips32el.ipk

bf41d0d8571623439839fb1347282380 enigma2-plugin-softcams-ncam-reloaded_1.8_BH_OpenBH_mips32el.ipk

Other info in the zip file.

thanks @carloscarlosa.
 
Last edited:

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,630
Ncam-reloaded ver.1.8 build.105 of 20 june 2018,

for armv7ahf-neon architecture, e.g vusolo4k, with
Blackhole/OpenblackHole image installed.


ipk MD5 checksim is:
4c51b3d8e92f6c0eb700f305d372106d enigma2-plugin-softcams-ncam-reloaded_1.8_BH_OpenBH_armv7ahf-neon.ipk

carloscarlosa.
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,630
Ncam-reloaded 1.8_rel.105_20june18 armv7ahf-neon_OpenPLi-6
(Running on Vu+Solo4k)


The IPK file md5sum is:
98a3fa1f9e56da9e116f1bc39cf8f4eb enigma2-plugin-softcams-ncam-reloaded_1.8-moh-105_200618_armv7ahf-neon.ipk

Web interface port: 17001


Thanks carloscarlosa.
 

WaRp

(∩`-´)⊃━☆゚.*・。゚
Staff member
Administrator
Messages
29,630
ncam-reloaded-1.8-moh-105_200618-x86_64-GNU-Linux-ssl-IPv6

For GNU/Linux 64bit distros - Running on Debian/Ubuntu/openSUSE

1- The zip files contains binary/executable + config files (which is a directory)
2- The binary file (the application) m5checksum is:
108b5a14fc8c7c01db6748bff854996b ncam-reloaded-1.8-moh-105_200618-x86_64-GNU-Linux-ssl-IPv6
3- The config files is a directory "mohncam" containing the necessary files.
4- In the zip archive there is a sim link to the actual binary file, as follows:

ncam-reloaded Link to /home/moh/rien/ncam-reloaded-1.8-moh-105_200618-x86_64-GNU-Linux-ssl-IPv6

NOTE:
(My default config files are set in: --config-dir=/home/moh/mohncam/)

But, please place the config directory mohncam elsewhere, see example below:
Example: /$HOME/Documents/mohncam, then launch ncam-Reloaded app with the switch as follows:

./ncam-reloaded -c /$HOME/Documents/mohncam OR
./ncam-reloaded --config-dir=/$HOME/Documents/mohncam

carloscarlosa.
 
Top