my dm 500s not starting after flash

P

plovdiv

Member
Messages
73
dear sirs,

i plashed my box and now it is not starting at all. i used dreamup by cable and dowunlawded my old flash from backup. at dreamup starting to connect to my dm box and it says box is alive and speaking to. after downlading the flash from dreamup my box light is green and nothing showing on the screen. i switched many times and dreamup it coupe times and it says everything is ok. but the light is green and nothing on the screen.
can anyone please,please, help me how can i bring back my dreambox. my box is orginal one. i will be most gratefull if anyone can help me how can i fix this problem as all night i searcehed at this site and could not find any solution to my problem. many thanks.
 
P

plovdiv

Member
Messages
73
thank you washington
but i am trying to flash with dreamup, it gives me that the box is alive and speaking to us- erras the old image and after ending it says that everything ok.
during all the time my box green light on, except during flashing it gets red to flash.
have you got any idea what i can do. as i am despareate and do not know what to do without my box.
i will be most gratefull if you could assist me in this matter
 
C

cdr

Senior Member
Messages
300
@ plovdiv

orund there is new IMAGE to cure clone and is been tested ok
i can't upload but if you look around you should be able to found it the are at Sat4fun good luk hope i haven't infrige some forum rules..
 
C

cdr

Senior Member
Messages
300
washington said:
Sorry cdr but look what he wrote in his first post:

"...my box is orginal one"
Click to expand...

YEAaaaaaa you right there didn't see is got a original...

never the less if anybody got a clone what i mention above is valid..there is a IMAGE to cure a clone

regards
 
A

aatee

Senior Member
Messages
435
first use erase image file
after this file than upload any image.
ur problem will be 100% solved.
erase image file is that file which cleans ur dream erors 100% clean.i am not able to upload any file otherwise i will upload it here.
 
L

LilleMama

Senior Member
Messages
283
If you are trying to install a backup image , you need the program that you used for the backup proberly Flash wisard Pro . but first use any image eg latest original dm image , then adjust network settings and rflash with backup image through lan
 
P

plovdiv

Member
Messages
73
thank you to all, whom replayed to my problem. unfortunately i did all what you said and my box is dead. even i erase my flash then flashed my saved flash and another time with backuping my settings and all it gives me that has been conected to the box and its a live at the end says the flash has been completated succesfully. but box is dead. the light is green and nothing else. nothing on screen or to work my control to flash my green light. nothing at all
 
You must log in or register to reply here.
Top