MIS transponders on 9.0E ?

[scorpion007]

Hi all, I have a VU+duo4k I cannot receive any Italian channels on 9.0e on MIS transponders, can anyone receive them or is it just a tuner fault on the Duo4k. I am using OBH image with vhannibal settings, as far as I know other settings and images are the same.

 

[georgeflu]

did you tried a manual scan?
not in vu+ , but in other receivers, i can receive them...




also, i found this...

Support MIS [COLOR="Red"]with 45308X DVB-S2X Tuner[/COLOR] (Ultimo4K, Duo4K, Uno4K SE, Uno4K)

is the same tuner that you are using?

 

[william-1]

Hi all, I have a VU+duo4k I cannot receive any Italian channels on 9.0e on MIS transponders, can anyone receive them or is it just a tuner fault on the Duo4k. I am using OBH image with vhannibal settings, as far as I know other settings and images are the same.

From your flag I take it that you are in England ?
We cannot receive the Italian spot beam here in England even with a 120cm dish see the footprint below.

https://www.flysat.com/e9b.php

 

[scorpion007]

Yes that's the tuner I've got but I think the tuner drivers are not properly working on Vu+. What receiver are you using?

Think your right its on the Italian beam.

 

[georgeflu]

i am in Greece (looks also out from footprint, but as happens always, footprints has always a little declination,but in any case, i am closer...so i can receive them)

i use edision os mio+ , edision primo and octagon sf8008.

about the beam... there are a few same frequencies, in 5W (if you can adapt your dish to receive it), which looks that has reception in south england...
http://www.flysat-beams.com/e5wb-beam.php

 

[Ferrara89]

I have a Vu Ultimo 4k with OpenATV 6.4 and the mustistream channels at both 9e and 5w open quietly.

 

[scorpion007]

Do you mean open quickly, if yes you are in the Italian foot print so you should not have any problems.