You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Mgc@md 1.35 qboxhd-mini working
- Thread starter neo501
- Start date
Tested on Qbox mini HD not working.
hi friend first of all please can you tell me on what providernot working for me
QBox HD
Image 1.07
or channel you made the test......
i have test the emmu on my box with the 1.04 fd works
the trick is on chanell change some times nead to restart
the emmu
note...with the 1.07 fd has problem
is freeze on few seconds
i will try to upload tomorrow some screenshots
an maybe a video tutorial with the install..
salute
Last edited:
i have test it as client to newcs and wont work.
It connects to the server but wont decode. i can provide logs if needed.
hi friend try to change the atributes on the files
at 755 chmod
i will try to upload tomorrow some screenshots
an maybe a video tutorial with the install..
salute
We are waiting .....
We are waiting .....
dear neo501 sorry for the delay,,,i have not forget ...
My baby was born last week ...so no time for anything at this moment...
Regards
pierus1970
Registered
- Messages
- 6
dear neo501 sorry for the delay,,,i have not forget ...
My baby was born last week ...so no time for anything at this moment...
Regards
Hello
I have copied in my qbox hd mini but it not works . I have also launched it at hand and the error is "segmentation fault" !
help me plase
thanks
pierus1970
Registered
- Messages
- 6
yes it is sh4 file
it is this http://www.sat-universe.com/attachment.php?attachmentid=251882&d=1293451214
it is this http://www.sat-universe.com/attachment.php?attachmentid=251882&d=1293451214
pierus1970
Registered
- Messages
- 6
Mgc@md 1.35 qboxhd working video tutorial
this is a video from my receiver with mgc@md 1.35 in stone 1.04 fd
test
seca prov RAi
Bis
cryptoworks
Note..
Attention!
this is only for testing purposes
You can use the informations to test the cryptografic systems
but not to decode or watch any TV channel.
Viewing Pay TV without a valid subscription is illegal
All the files available here are kept for experimental and educational purpose only!
Download
this is a video from my receiver with mgc@md 1.35 in stone 1.04 fd
test
seca prov RAi
Bis
cryptoworks
Note..
Attention!
this is only for testing purposes
You can use the informations to test the cryptografic systems
but not to decode or watch any TV channel.
Viewing Pay TV without a valid subscription is illegal
All the files available here are kept for experimental and educational purpose only!
Download
pierus1970
Registered
- Messages
- 6
yes ok
but in summary
1) install softcam panel from addons Team TAPESS
2) edit newcamd.list in /var/keys
3) start mgcamd from softcam panel
and it does not work
if I copied mgcamd patched in /var/bin /var/etc and /var/keys
mgcamd goes in segmentation fault
help me
thanks
but in summary
1) install softcam panel from addons Team TAPESS
2) edit newcamd.list in /var/keys
3) start mgcamd from softcam panel
and it does not work
if I copied mgcamd patched in /var/bin /var/etc and /var/keys
mgcamd goes in segmentation fault
help me
thanks
In my case, not working... with this message
Hi:
I tried this cam in the last Roy image, and It does not work starting it from the panel... or by hand.
When I launch by hand the mg_start.sh, the mgcamd connects perfectly but later, I get a lot of messages like this:
...
A connection has been established, readed 179 bytes
unable to open demuxdevice: No such file or directory
A connection has been established, readed 179 bytes
unable to open demuxdevice: No such file or directory
A connection has been established, readed 179 bytes
unable to open demuxdevice: No such file or directory
...
It does not work, but no "segmentation fault".
I don't know if this can help.
Thanks.
Hi:
I tried this cam in the last Roy image, and It does not work starting it from the panel... or by hand.
When I launch by hand the mg_start.sh, the mgcamd connects perfectly but later, I get a lot of messages like this:
...
A connection has been established, readed 179 bytes
unable to open demuxdevice: No such file or directory
A connection has been established, readed 179 bytes
unable to open demuxdevice: No such file or directory
A connection has been established, readed 179 bytes
unable to open demuxdevice: No such file or directory
...
It does not work, but no "segmentation fault".
I don't know if this can help.
Thanks.
pierus1970
Registered
- Messages
- 6
yes
if I use the cam in the repository, that contained in Softcam panel 2.0.1 i receive the error "got 117 cmd 9f"
if I use that patched of the link above (http://www.sat-universe.com/attachme...2&d=1293451214) I receive "segmentation fault"
yes
if I use the cam in the repository, that contained in Softcam panel 2.0.1 i receive the error "got 117 cmd 9f"
if I use that patched of the link above (http://www.sat-universe.com/showthre...d=1#post730108) I receive "segmentation fault"
if I use the cam in the repository, that contained in Softcam panel 2.0.1 i receive the error "got 117 cmd 9f"
if I use that patched of the link above (http://www.sat-universe.com/attachme...2&d=1293451214) I receive "segmentation fault"
yes
if I use the cam in the repository, that contained in Softcam panel 2.0.1 i receive the error "got 117 cmd 9f"
if I use that patched of the link above (http://www.sat-universe.com/showthre...d=1#post730108) I receive "segmentation fault"
now i get mgcamd to work, but i have no picture at the tv.
can anybody help ?
tuxbox mgcamd v1.35 by mixvt (compiled Jan 20 2010 22:15:45)
[mg] Net:0:0:0:5s Show ecm:1, emm:2 Up:2 Au:1 Dir:0 Osd:no:80:0 Cache:0 Log:3:172.16.1.1:28007 Reread:2
[mg] Ecm cache time: 15
Box type: openbox/stapi
Conax.Key error 2: No such file or directory
root@qboxhd# Keys readed
Conax.Key error 2: No such file or directory
[mgcam] emm thread started
[mg0] service 32C9 index 0 pmt pid 0 (1)
[mg0] ECM: CaID: 0x0D05 -> CaPID: 0x00C9 ProvID: 000000
[mg0] ECM: CaID: 0x0D95 -> CaPID: 0x00FB ProvID: 000000
[mg0] ECM: CaID: 0x0648 -> CaPID: 0x0065 ProvID: 000000
[mg0] ECM: CaID: 0x1702 -> CaPID: 0x012D ProvID: 000000
[mg0] ECM: CaID: 0x1833 -> CaPID: 0x0191 ProvID: 000000
[mg0] ECM: CaID: 0x09C4 -> CaPID: 0x01E1 ProvID: 000000
[mg0] Cryptoworks prov 4
[mg0] Wed Jan 12 17:18:08 2011
===== Cryptoworks ECM on CaID 0x0D05, pid 0x00c9 ======
prov: 000004 pkey: 00 =
cw0:0
cw1:0
[mgcamd] emm started
[mgcamd] emm stopped
[mg0] Cryptoworks prov 4
[mg0] Wed Jan 12 17:18:15 2011
===== Cryptoworks ECM on CaID 0x0D05, pid 0x00c9 ======
prov: 000004 pkey: 00 =
cw0:0
cw1:0
root@qboxhd# [mg0] Cryptoworks prov 4
[mg0] Wed Jan 12 17:18:25 2011
===== Cryptoworks ECM on CaID 0x0D05, pid 0x00c9 ======
prov: 000004 pkey: 00 =
cw0:0
cw1:0
can anybody help ?
tuxbox mgcamd v1.35 by mixvt (compiled Jan 20 2010 22:15:45)
[mg] Net:0:0:0:5s Show ecm:1, emm:2 Up:2 Au:1 Dir:0 Osd:no:80:0 Cache:0 Log:3:172.16.1.1:28007 Reread:2
[mg] Ecm cache time: 15
Box type: openbox/stapi
Conax.Key error 2: No such file or directory
root@qboxhd# Keys readed
Conax.Key error 2: No such file or directory
[mgcam] emm thread started
[mg0] service 32C9 index 0 pmt pid 0 (1)
[mg0] ECM: CaID: 0x0D05 -> CaPID: 0x00C9 ProvID: 000000
[mg0] ECM: CaID: 0x0D95 -> CaPID: 0x00FB ProvID: 000000
[mg0] ECM: CaID: 0x0648 -> CaPID: 0x0065 ProvID: 000000
[mg0] ECM: CaID: 0x1702 -> CaPID: 0x012D ProvID: 000000
[mg0] ECM: CaID: 0x1833 -> CaPID: 0x0191 ProvID: 000000
[mg0] ECM: CaID: 0x09C4 -> CaPID: 0x01E1 ProvID: 000000
[mg0] Cryptoworks prov 4
[mg0] Wed Jan 12 17:18:08 2011
===== Cryptoworks ECM on CaID 0x0D05, pid 0x00c9 ======
prov: 000004 pkey: 00 =
cw0:0
cw1:0
[mgcamd] emm started
[mgcamd] emm stopped
[mg0] Cryptoworks prov 4
[mg0] Wed Jan 12 17:18:15 2011
===== Cryptoworks ECM on CaID 0x0D05, pid 0x00c9 ======
prov: 000004 pkey: 00 =
cw0:0
cw1:0
root@qboxhd# [mg0] Cryptoworks prov 4
[mg0] Wed Jan 12 17:18:25 2011
===== Cryptoworks ECM on CaID 0x0D05, pid 0x00c9 ======
prov: 000004 pkey: 00 =
cw0:0
cw1:0